* fix(backend): make repository setup script failures non-fatal
A failing repository setup script aborted environment preparation and
stopped the agent ("Environment setup failed"), and Resume / Start-fresh
couldn't recover because each relaunch re-ran the same failing script.
runWorktreeSetupScript (run inside worktree creation) treated a non-zero
exit as fatal: it deleted the worktree and returned an error, which
cascaded to EnvPrepareResult{Success: false} and aborted the launch. This
contradicted the already-non-fatal task/profile-level setup script path.
The repo-level script is now non-fatal too: on failure it logs a warning,
records SetupScriptWarning on the worktree, keeps the worktree, and lets
the launch proceed. The env preparer surfaces it on the "Create worktree"
step so the panel shows completed_with_warnings instead of failed. The
full script output still streams to the script_execution chat message.
Adds backend regression tests and an e2e test (verified red before / green
after) asserting the agent still launches when the repo setup script fails.
* fix(backend): preserve base-branch warning when setup script also fails
Addresses review feedback: the post-Create block surfacing SetupScriptWarning
on the "Create worktree" step unconditionally overwrote BaseBranchFallbackWarning
when both occurred, silently dropping the "wrong branch" notice. Append instead
of replace so both survive.
Also updates TestWorktreePreparer_SetupScriptFailure_KeepsCreateWorktreeStepCompleted
to the non-fatal contract: a failed setup script now yields a successful prepare
with a warning on the step, not a failed prepare.
* fix(orchestrator): stop duplicating workflow auto-start prompt on boot-ready drain
When a workflow auto-start prompt failed transiently and was queued by the
retry branches in autoStartStepPrompt, the boot_ready drain later re-inserted
the same user message because executeQueuedMessage always called
CreateUserMessage — producing the two identical Merge prompts observed when
an ACP session resumed after going idle.
Tag the queued message with user_message_recorded when recordAutoStartMessage
has already run before the queue, and have executeQueuedMessage skip its
chat-history insert when the flag is set. The early-busy queue path
(queueAutoStartPromptIfRunning) still queues without the flag so the drain
side keeps owning the record for that path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(orchestrator): propagate recordAutoStartMessage result and tighten else-if guard
recordAutoStartMessage now returns bool (true = chat row successfully
inserted). Both queueAutoStartPrompt call sites in autoStartStepPrompt
pass the return value instead of hardcoded true, so user_message_recorded
is only stamped true when CreateUserMessage actually succeeded. A silently
swallowed DB write failure no longer stamps the flag, letting
executeQueuedMessage fall back to inserting the message on drain.
Also scope the debug-log else-if to s.messageCreator != nil so it only
fires when a CreateUserMessage attempt would otherwise have been made.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* chore(agentctl): delete duplicate procattr files in adapter package
setProcGroup and killProcessGroup are defined in both
agentctl/server/adapter/ and agentctl/server/process/. The process/
copies are the live ones (called by process/runner.go, manager.go,
vscode.go); the adapter/ copies have zero callers and are removed.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(agentctl): remove orphan helpers from transport/shared
Left over from the ACP refactor. All had zero callers:
- DebugEnabled(): internal debugMode var is checked directly by
LogRawEvent/LogNormalizedEvent — the exported wrapper was unused.
- GetBool, GetMap, GetSlice: only GetString/GetInt are called in acp/normalize.go.
- NormalizeShellResult, NormalizeReadResult, NormalizeCodeSearchResult,
NormalizeModifyResult: normalization moved to acp/normalize.go.
- TruncateIfNeeded, MaxContentLength, MaxFileCount: only used by the
four Normalize* helpers above; removed transitively.
- TraceControlMessage: zero callers in the adapter transport layer.
GenerateUnifiedDiff, SplitLines, DetectLanguage, Tracer, ShutdownTracing,
TraceProtocolEvent, TraceProtocolRequest are alive and kept.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(agentctl): remove unused tool_payload constructors
NewHttpRequest, NewCreateTask, NewSubagentTask, NewShowPlan,
NewManageTodos, and NewMisc have zero callers — ACP normalization
builds NormalizedPayload via struct literals and JSON unmarshaling,
not these factory functions. NewReadFile, NewModifyFile, NewShellExec,
NewCodeSearch, and NewGeneric are kept (live callers in acp/normalize.go).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(agents/detect): remove dead fluent options and OSPaths type
WithFileExists, WithCommandOutput, WithEnvVar, expandHomePath (their
transitive helper), and OSPaths (struct + Resolve + Expanded) have
zero callers. Only WithCommand and WithNpxRunnable are used by agent
IsInstalled implementations. Imports trimmed to context and os/exec.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(office): remove dead channel methods superseded by service/
ListComments, DeleteComment, and UpdateChannelStatus on ChannelService
have zero callers — the live implementations live in
internal/office/service/comments.go and service/channels.go.
CreateComment is kept: it is called by HandleChannelInbound.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove scattered orphan helpers
Remove dead single-symbol exports verified to have zero callers:
- ParseCronExpression (office/shared/cron.go): NextCronTime covers
all live usages; the validator wrapper was unused.
- IsValidPathComponent, MustJSON (office/shared/helpers.go): zero
callers; GenerateSlug is kept.
- DiscoverUserSkillsAt (office/skills/userhome_discovery.go): exported
wrapper over the private discoverUserSkillsAt; only the internal
DiscoverUserSkills method is wired up.
- Manager.Get (agent/loginpty/manager.go): zero callers; GetByID and
Stop are kept (Stop is tested in manager_test.go).
- DetachedWithValues (common/appctx/appctx.go): zero callers; Detached
is kept.
- Repository.Close no-ops (task/share, terminal/repository): both are
documented no-ops with zero callers.
- TaskBranchName (worktree/config.go): zero callers; the deterministic
TaskBranchNameWithSuffix is kept.
Note: dialect.Now was initially targeted but is tested in
dialect_test.go (same-package call — missed by package-qualified grep).
It remains unchanged.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(share): remove stale Close reference from provider.go comment
Repository.Close() was removed as a no-op in the round-4 cleanup.
The comment in provider.go still referenced it by name; updated to
reflect that the repo simply doesn't own its DB connections.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(office/shared): delete helpers.go — GenerateSlug had zero callers
The triage step mistakenly identified skills/service.go as a caller,
but that package defines its own local GenerateSlug (different regex,
adds TrimSpace and a 'skill' fallback default). shared.GenerateSlug
was never called anywhere. helpers.go is now empty; delete the file.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore(worktree): fix stale TaskBranchName reference in TaskBranchNameWithSuffix doc
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* refactor(web): extract measureCaretRect into shared util
Move the textarea caret-position measurement helper out of
rich-text-input.tsx into apps/web/lib/utils/caret-position.ts so the
task-create dialog's autocomplete wiring can reuse it without depending
on the chat-only RichTextInput component.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web): allow custom prompts in task creation input
Add an @-mention autocomplete to the task-create dialog's prompt
textarea so users can quickly insert one of their saved custom prompts
(built-in + user-created) by typing @<name>.
- Extend useInlineMention with a promptInsertMode option. The default
"context" mode preserves chat behavior (attach the prompt to the
context store). The new "inline" mode replaces the @query text with
the prompt's full content, requiring no backend changes -- the
resolved text just becomes part of the task description on submit.
- Wire the hook into TaskFormInputs via a small useTaskCreatePromptMention
helper that adapts the existing textarea ref to the RichTextInputHandle
surface the hook expects (focus / selection / caret-rect / value).
- Reuse the existing MentionMenu popup component for parity with chat.
- Cover the new branches with unit tests for makePromptItem /
detectMentionTrigger / filterItems, and an E2E spec exercising
the menu open / inline-insertion / Enter-doesn't-submit /
trigger-inside-word paths.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web): make mention popup clickable inside Radix Dialog
Radix Dialog sets pointer-events: none on document.body to enforce
modal isolation. The mention/slash menu portals to document.body and
inherits the disabled pointer events when opened from inside a Dialog
(the task-create flow). The popup was visible but unclickable: keyboard
select worked, mouse clicks were swallowed by the Dialog body.
Restore pointerEvents: auto on the popup container so it stays
clickable when invoked from within a modal. Bump z-index to 60 so the
popup also wins the visual stacking race against the Dialog (overlay +
content are both z-50). Chat continues to work unchanged since z-60 and
pointer-events: auto are no-ops outside a modal.
Add an adversarial QA spec covering mouse-click select, ArrowDown +
Enter on the 2nd item, Escape close, multi-line content auto-grow,
backspace-over-@ close, space-after-@ close, no-arrow-cursor-shift,
and end-to-end submit. The mouse-click case is the one this fix
unblocks; the rest pin behavior for future regressions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web): address PR review feedback
- caret-position.ts: wrap DOM measurement in try/finally so the mirror
element is always removed even if getBoundingClientRect throws
- useTextareaHandlers: destructure stable fn refs from mention before
useCallback so deps are specific properties, not the whole object —
avoids defeating memoization on every keystroke
- QA spec: consolidate inline cleanupPrompts calls into a shared
test.afterEach so cleanup always runs even when a test throws; update
submit test comment to accurately reflect what is asserted
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(web): tighten ArrowDown selection assertion in QA E2E spec
Equal filter scores sort by insertion order (stable), so qa-arr-1 lands
at index 0 and qa-arr-2 at index 1. After one ArrowDown from the default
the selected item is "SECOND" — assert that directly instead of accepting
either value, matching the test title "selects the second prompt".
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* chore(backend): add go.uber.org/goleak test dependency
Promotes the previously-indirect goleak v1.3.0 to a direct require so
per-package TestMain calls can use it for goroutine leak detection.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(backend/lifecycle): drain workspace-stream backoff on Manager.Stop
StreamManager.connectWorkspaceStream slept the full retry backoff in
time.Sleep between failed attempts. SessionTraceContext is deliberately
uncancellable (it carries a long-lived span), so if the Manager began
shutting down mid-backoff the goroutine outlived Stop() and stranded
until the timer fired.
Thread Manager.stopCh through the StreamManager constructor and add a
sleepOrStop helper that selects between the timer and the shutdown
signal. ReconnectAll's startup sleep gets the same treatment.
TestConnectWorkspaceStream_BackoffDrainsOnStop closes stopCh while a
failing-port retry is in flight and asserts the goroutine exits within
500ms — fails without the fix, passes with it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(backend/github): close sqlite DB in newTestStore to drain connectionOpener
newTestStore opened *sqlx.DB via db.OpenSQLite but never registered a
Close on cleanup, leaving database/sql.(*DB).connectionOpener goroutines
parked across test boundaries. Add t.Cleanup(sqlxDB.Close); goleak's
per-package TestMain (added in a follow-up commit) is the regression
check.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(backend): wire goleak.VerifyTestMain across leak-prone packages
Per-package TestMain in:
- internal/integrations/healthpoll (auth-health ticker loop)
- internal/jira, internal/linear (auth + issue-watch loops)
- internal/github (PR / review / issue poller loops)
- internal/gateway/websocket (per-conn pumps + terminal bridge)
- internal/orchestrator (detached event-handler goroutines)
- internal/agent/runtime/lifecycle (remote-status loop, StreamManager
helpers; ignores OTel batch-span processor and OTLP retry helper —
initialised early in the process and only exit on shutdown)
- internal/agentctl/server/process (extends the existing fixture-binary
TestMain so subprocess + PTY pump leaks surface there)
Catches regressions where a Start/Stop forgets to drain on WaitGroup,
or a detached goroutine forgets to honour ctx/stopCh cancellation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* docs(backend): document goroutine ownership and leak-testing convention
New "Goroutine ownership and leak testing" subsection under Conventions
in apps/backend/AGENTS.md (CLAUDE.md symlinks to it). Covers:
- Lifecycle: Start/Stop + WaitGroup, both idempotent.
- Cancellation: every long wait selects on ctx.Done() or stopCh; never
time.Sleep in retry loops (reference lifecycle.StreamManager.sleepOrStop).
- Detached helpers: must respect the owning type's shutdown signal.
- Leak testing: new packages spawning goroutines add goleak.VerifyTestMain;
IgnoreTopFunction is reserved for genuine third-party background
goroutines and must carry a comment explaining the suppression.
Lists the packages currently instrumented so future contributors can
mirror the pattern.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* chore(backend/lifecycle): drop dead OTel IgnoreTopFunction from goleak setup
Review follow-up. agentctl/tracing.initTracing only spawns the OTel SDK
provider when OTEL_EXPORTER_OTLP_ENDPOINT is set; in tests it isn't, so
the noop provider is used and no batchSpanProcessor / OTLP retry
goroutines ever exist. The IgnoreTopFunction calls were dead
suppressions and the comment ("called by NewManager via the agent
execution trace path") misdescribed when the SDK init runs. Drop the
ignores and correct AGENTS.md to stop citing OTel as the canonical
suppression example.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(backend/lifecycle): drop unneeded 50ms sleep from backoff-drain test
QA follow-up. The 50ms time.Sleep before close(stopCh) in
TestConnectWorkspaceStream_BackoffDrainsOnStop was meant to ensure the
goroutine had entered the backoff sleep before shutdown — but that
ordering doesn't affect the test outcome:
- With the fix: sleepOrStop sees stopCh already closed and returns
false on the first call, so the goroutine drains within one attempt
regardless of when stopCh closes.
- Without the fix: time.Sleep ignores stopCh, the goroutine burns
its full 5-retry backoff (~31s), and the 500ms timeout fires.
Removing the sleep makes the test ~12x faster (15ms vs 200ms total) and
removes the only time.Sleep-based wait from the new tests, aligning
with the codebase's "channel-based sync, no sleep waits" convention.
Verified by 50x -race and 5x revert-and-fail.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(backend/github): drain HTTP idle conns before goleak inspects
CI surfaced a leaked goroutine on the Linux runner that local runs
missed: a single net/http.(*http2ClientConn).readLoop parked on a
TLS read, created by net/http.(*http2Transport).newClientConn. The
package's anonymousHTTPClient and PATClient's rewriteTransport both
route through http.DefaultTransport's connection pool, so an idle
HTTP/2 connection in that pool keeps the reader goroutine alive past
m.Run() — invisible on sandboxed local runs where outbound network
is blocked.
Replace github/goleak_test.go's plain VerifyTestMain with an
expanded TestMain that drains http.DefaultTransport's idle
connections before goleak.Find runs. This is the stdlib's
documented teardown for the connection pool, keeps the assertion
strict (no IgnoreTopFunction), and doesn't leak into production
code. Other in-scope packages don't need this — they don't use
http.DefaultTransport for HTTPS calls.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(backend): drain ws.Done on stopCh; always run goleak in github tests
- lifecycle/streams.go: replace bare <-ws.Done() with a select that also
watches sm.stopCh so a connected goroutine drains when Manager.Stop()
fires before the remote WS closes. A nil stopCh (isolated tests) blocks
the nil channel case forever, degrading to plain <-ws.Done() semantics.
- github/goleak_test.go: remove the exitCode==0 guard around goleak.Find
so leaks are always surfaced even when a test has already failed; original
exit code is preserved (leaks only promote it to 1).
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* fix(backend/lifecycle): close ws on stopCh so agentctl WS loops drain
cubic flagged that the previous shutdown path observed stopCh but never
called ws.Close(), so the underlying WebSocket and its agentctl-side
read/write goroutines (workspace_stream.go:67-68) kept running past
Manager.Stop(). ClearWorkspaceStream only removes the WS from the
execution's tracking — it doesn't close the connection.
Call ws.Close() on the stopCh path. ws.Close is idempotent via
closeOnce, so it's safe even if the remote end already closed.
TestConnectWorkspaceStream_ClosesWSOnStop connects to a mock workspace
server that stays open until the client closes its side; after stopCh
fires, the test asserts ws.Done() closes within 500ms — which is only
true if connectWorkspaceStream invoked ws.Close(). Verified to fail
without the fix and pass with it.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(backend/lifecycle): use channel sync instead of sleep polling in ws-close test
cubic flagged that TestConnectWorkspaceStream_ClosesWSOnStop polled
execution.GetWorkspaceStream() in a 500ms sleep loop, which is brittle
under CI load. connectWorkspaceStream already accepts a ready
channel that closes after SetWorkspaceStream — pass it in and wait on
the channel instead.
synctest isn't viable here (real network I/O), so channel-based sync is
the testing convention per AGENTS.md.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* chore: remove orphan executor tracing file and deprecated ResolveScript wrappers
- Delete internal/agentctl/tracing/executor.go (7 TraceExecutor* funcs)
- Delete internal/orchestrator/executor/script_template.go (deprecated wrapper)
- Delete scriptengine.ResolveScript convenience function
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove orphan setter methods across healthpoll, jira, linear, slack, updates
- Delete Poller.SetInterval from integrations/healthpoll (no callers)
- Delete Poller.SetIssueTickHook from jira and linear (no callers)
- Delete Trigger.SetInterval and Trigger.SetMatchHook from slack (no callers)
- Delete Service.SetPollInterval from system/updates (no callers)
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove orphan wrapper functions and accessor method
- Delete updates.FetchLatestRelease shim (wraps FetchLatestReleaseFrom, no callers)
- Delete usage.NewClaudeUsageClient and NewCodexUsageClient shims (no callers)
- Delete database.Service.Path() accessor (no callers)
- Update ErrGitHubRateLimited godoc to reference FetchLatestReleaseFrom
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove unwired handleListExecutors MCP handler
The sibling profile handlers (list/create/update/delete) are registered
via RegisterFunc in handlers.go. handleListExecutors never was — dead flow.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove stale hook-field comments after setter deletion
SetIssueTickHook (jira, linear) and SetMatchHook (slack) were removed
in the deadcode cleanup. Their struct fields still claimed "tests use
this" — no test or caller can set these fields now.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* chore: remove orphan hook fields and fire methods after setter deletion
issueTickHook (jira/linear) and matchHook (slack) are unexported and
never set after their public setters were removed; fireIssueTickHook /
fireHook were permanent no-ops.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com>
* refactor(backend): split terminal_handler.go into pumps/sessions/messages
terminal_handler.go was 1,380 lines (1.7x the 800-line cap). Split it into
four sibling files in the same package, by responsibility:
- terminal_handler.go (525 lines): HTTP upgrade, route dispatch, top-level
handler entries, shell-label resolution.
- terminal_pumps.go (725 lines): wsWriter, bridgeBinaryWebSockets,
runTerminalBridge / runUserShellBridge and all input/resize/PTY-setup
helpers. Extracts replayBufferedOutput from setupPtyAccessCommon to keep
nestif under threshold.
- terminal_sessions.go (133 lines): execution-readiness helpers
(ensurePassthroughExecutionReady, waitForRemoteExecutionReadyWithTimeout,
remoteExecutionWithClientReady, shouldUseWorkspaceShell) and related
timeout constants.
- terminal_messages.go (53 lines): protocol primitives (ResizePayload,
isResizeCommand, resizeCommandByte, stripTerminalResponses), with a
top-of-file doc comment describing the binary wire protocol.
Backed off the "typed TerminalMessage envelope" half of the task: the
current protocol is binary, not JSON-enveloped (terminal I/O is raw PTY
bytes; the only JSON is ResizePayload, sent as a binary frame prefixed by
0x01). Wrapping PTY bytes in a JSON envelope would require base64 and
break xterm.js AttachAddon for every client — the task brief explicitly
authorizes shipping just the file split when the format would change.
Adds terminal_messages_test.go pinning the wire format: exact JSON output
of ResizePayload, the 0x01-prefix detection, and a full resize-frame
round-trip. These fail loudly on any accidental change to the struct tags
or prefix byte.
Pure relocation otherwise: no signature changes, no behavior changes, no
frontend impact.
* refactor(backend): simplify detectInputSubmission with bytes.ContainsAny
Addresses Claude bot's PR review on #1056: replace the manual loop +
flag pattern with bytes.ContainsAny(data, "\n\r"). Behavior identical
(detect CR or LF anywhere in the input). Also drops the now-redundant
"Check for Enter key (CR or LF)" comment.
* ci: retrigger CI to re-test known-flaky session-resume spec
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* refactor(task/repo): split sqlite/base.go (1486 lines) into schema/migrations/queries
base.go grew to 1.85x the 800-line lint threshold by mixing the Repository
struct, schema initialization, ALTER TABLE migrations, recreate-and-copy
table rebuilds, and historical backfills/heals. Split along those seams:
- base.go (58 lines) keeps only the Repository struct, NewWithDB,
newRepository, Close, DB.
- base_schema.go owns the initSchema orchestrator, every init*Schema
function, ensure*Indexes, ensureRunnerProjectionTables, and the
plan-revision backfill that runs as part of initPlansSchema.
- base_migrations.go owns migrate*, recreateTable[Named], runMigrations,
the backfillRow type, and every backfill*/heal* function. Verbatim
function moves with no semantic changes.
- base_queries.go owns sqlLimitClause (still referenced by plan.go,
document.go, message.go).
To keep golangci-lint (new: true) green after the move:
- initSchema's 17 if-return chain becomes a for-each-step loop so
cyclomatic complexity drops from 19 to within the 15 limit.
- initInfraSchema and initSessionWorktreeSchema hoist their DDL strings
into package-level consts (infraSchemaDDL, sessionWorktreeSchemaDDL)
so each function body fits the 80-line funlen cap.
Step ordering in initSchema is preserved exactly (backfillTaskEnvironments
-> backfillTaskEnvironmentRepos -> healTaskEnvironmentWorkspacePaths ->
healDuplicateTaskEnvironments -> ensureTaskEnvironmentTaskUniqueIndex ->
healSessionTaskEnvironmentIDs) so existing prod DBs continue to migrate
correctly.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(task/repo): add BatchGetSessionsByTaskIDs to eliminate task-list N+1
Adds a single repository method that returns every task_session for a list
of task IDs in one chunked IN (...) query, grouped by task_id. The
workspace task-list endpoint previously needed three batched calls
(GetPrimarySessionIDsByTaskIDs + GetSessionCountsByTaskIDs +
GetPrimarySessionInfoByTaskIDs); with this loader the handler can derive
primary session ID, session count, and per-task session info from a
single round trip.
- buildInPlaceholders and chunkIDs land in base_queries.go.
sqliteMaxHostParams=500 keeps each chunk well below SQLite's
compile-time SQLITE_MAX_VARIABLE_NUMBER (999 on older builds, 32766
on newer).
- session.go gains BatchGetSessionsByTaskIDs, which reuses
taskSessionSelectCols / scanTaskSessions / loadWorktreesBatch so the
returned sessions are indistinguishable from ListTaskSessions output
(worktrees populated, JSON snapshots decoded). Empty input
short-circuits with a non-nil empty map.
- SessionRepository interface and Service.BatchGetSessionsForTasks
expose the new method to the handler layer. The three existing
*ByTaskIDs methods are left in place because service_events.go still
uses them for single-task event publishing.
- mockRepository implementations updated in two test files so the
packages still satisfy the interface.
TestBatchGetSessionsByTaskIDs covers the empty-input short-circuit, the
multi-task (3 x 2) case (primary derivation + no cross-task bleed), and
the asked-for-but-missing case (absent from result map).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* perf(task/handlers): use BatchGetSessionsForTasks in task-list endpoint
buildTaskDTOsWithSessionInfo previously issued three batched queries per
request (GetPrimarySessionIDsForTasks + GetSessionCountsForTasks +
GetPrimarySessionInfoForTasks). Each was already chunked by task_id,
but together they were three round trips for data that can be derived
from one. Collapse to a single BatchGetSessionsForTasks call and derive
primary session ID, count, and per-task primary info in memory.
The JSON response shape is unchanged: dto.FromTaskWithSessionInfo
still receives the same pointer-typed arguments, primarySessionID stays
nil when no primary exists, and sessionCount stays nil for tasks with
zero sessions (matches the existing pointer-when-present contract that
the frontend store hydration depends on).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/handlers): restore JOIN-derived executor type/name in task-list response
buildTaskDTOsWithSessionInfo regressed when it stopped calling
GetPrimarySessionInfoForTasks: extractSessionInfo reads
ExecutorSnapshot["executor_type"] and ExecutorSnapshot["executor_name"],
but those keys exist only on the synthetic snapshot built by the
GetPrimarySessionInfoByTaskIDs LEFT JOIN to executors. The persisted
ExecutorSnapshot JSON uses different keys (e.g. "type" — see
share/builder.go:96), so BatchGetSessionsForTasks alone always yielded
empty executor_type / executor_name fields in the task-list response,
breaking the frontend task card's executor badge.
Fix (caught in code review):
- Handler now calls both BatchGetSessionsForTasks (for primary session
ID and session count) and GetPrimarySessionInfoForTasks (for the
JOIN-derived executor type/name and other session info). Two queries
instead of the original three; correctness preserved.
- New TestGetPrimarySessionInfoByTaskIDs_PopulatesExecutorJoinFields
seeds an executor + primary session, then asserts the JOIN populates
ExecutorSnapshot["executor_type"] / ["executor_name"] on the returned
session. Locks in the contract the handler depends on so a future
refactor that drops the JOIN fails loudly instead of silently
emitting empty fields.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): chunkIDs returns empty slice for empty input
chunkIDs previously returned [][]string{nil} for an empty/nil input
(a single chunk whose value is nil). The only current caller
(BatchGetSessionsByTaskIDs) short-circuits empty input before reaching
chunkIDs, so the bug stayed dormant — but any new caller that forgot
the short-circuit would feed a nil chunk to buildInPlaceholders (which
returns "" for nil), produce a `... WHERE task_id IN () ORDER BY ...`
query, and hit a SQL syntax error at runtime.
Make the helper safe by construction: an empty input returns nil
(empty outer slice), so `range chunkIDs(empty, n)` iterates zero
times. Add base_queries_test.go covering:
- Empty/nil input → no chunks (locks the safety contract).
- Single-pass input fits in one chunk.
- Over-threshold input splits into correctly-sized, in-order chunks.
- buildInPlaceholders normal + empty-input cases.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): propagate non-ErrNoRows errors in backfillSingleTask executor lookup
`backfillSingleTask` looked up `executors.type` for the legacy executor
referenced by a session and defaulted to `"local_pc"` on any error.
That silently masked driver failures, schema mismatches, and corruption
— every backfilled task_environment would get the wrong executor_type
without surfacing the underlying problem.
Narrow the default to the legitimate case: only `sql.ErrNoRows` (the
executor row was actually deleted, e.g. legacy session whose executor
is gone) falls back to `"local_pc"`. Any other scan error now aborts
the migration with a wrapped error so operators see the real cause.
Adds TestBackfillSingleTask_DefaultsExecutorTypeOnMissingRow which
seeds a session referencing a non-existent executor id and asserts the
backfill still completes with `executor_type = local_pc` — locks in
the legitimate-fallback path.
Addresses PR #1058 review feedback from cubic & claude.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): chunk ListWorktreesBySessionIDs to honor SQLite var limit
ListWorktreesBySessionIDs built its IN-clause from every input session ID
in one shot. BatchGetSessionsByTaskIDs chunks task IDs at 500 to stay
below SQLITE_MAX_VARIABLE_NUMBER (999 on older builds), but its
loadWorktreesBatch step then handed all sessions in that 500-task chunk
to ListWorktreesBySessionIDs un-chunked — so at modest workloads (500
tasks × ≥2 sessions each = 1000 placeholders) the query fails with
SQLITE_RANGE and bubbles up as a 404 on the task-list endpoint.
ListWorktreesBySessionIDs now applies the same chunkIDs / 500 cap that
BatchGet uses. Body extracted to appendWorktreesForSessionChunk so the
public method stays under the 80-line funlen cap.
New TestListWorktreesBySessionIDs_ChunksOverPlaceholderLimit feeds the
method 1001 non-existent session IDs and asserts it returns cleanly —
without chunking, this fails with SQLITE_RANGE on a default-built SQLite.
Also splits TestBatchGetSessionsByTaskIDs (was 98 lines) into focused
subtests + a shared seedBatchSessions helper, satisfying the test-size
convention. The three sub-scenarios (empty input, multi-task grouping,
missing-task absence) now fail in isolation.
Addresses PR #1058 review feedback from greptile (P1) and claude
(suggestion).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): port repositories.copy_files migration to split files
Rebased onto main; main added copy_files to runMigrations() and
initTaskSchema() in base.go while our branch had split those into
base_migrations.go and base_schema.go. Cherry-pick both additions
into the correct split files so the schema is consistent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>