* fix(task): cascade-archive child tasks on workflow delete
Tasks pointing at a deleted workflow_id silently became unreachable
because the FK on tasks.workflow_id was dropped to support ephemeral
quick-chat tasks, so SQLite cannot CASCADE. Service.DeleteWorkflow
now archives every active child task before removing the workflow,
re-using the existing ArchiveTask path (events, worktree cleanup,
agent stop). Frontend confirm copy and button label updated to reflect
the new behavior.
Closes#1279
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): make workflow-delete cascade race-safe
Address review feedback (Greptile, Claude, cubic): ArchiveTask now returns
a typed ErrTaskAlreadyArchived sentinel so DeleteWorkflow can swallow the
TOCTOU race where a task is archived between ListTasks and ArchiveTask.
Without the sentinel, that race would propagate as an opaque error and
leave the workflow row intact even though every task in the snapshot was
already in the desired state.
Tests:
- TestService_DeleteWorkflow_SkipsConcurrentlyArchivedTask covers the
sentinel-skip path through the cascade.
- TestService_DeleteWorkflow_PartialArchiveErrorPreservesWorkflow covers
the fail-fast contract on a real (non-sentinel) error: workflow row
survives, previously-archived tasks stay archived, retry is safe.
- TestService_ArchiveTask_ReturnsAlreadyArchivedSentinel locks in the
sentinel-error contract DeleteWorkflow relies on.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* feat(tasks): search tasks by PR number in command panel
Typing a PR number (e.g. 1243 or #1243) in the Cmd+K panel now surfaces
the task that PR is associated with, alongside the existing
title/description/repo search.
The github store gains a workspace-scoped ListTaskIDsByPRNumber lookup
over github_task_prs; the task service resolves it through an injected
PRTaskResolver interface (github service wired in cmd/kandev) and merges
PR matches into search results, deduped and respecting the
archived/ephemeral/config filters. Keeping the lookup at the service
layer avoids coupling the task repository to the github schema, so
existing search queries and tests are untouched.
* fix(tasks): scope PR-number search to page 1 and unfiltered queries
Address review feedback on PR-number search:
- Only augment results on the first page of an unscoped search. Running
on every page re-prepended the PR match and truncated a real result
off each subsequent page; running under a workflow/repository filter
leaked tasks that don't satisfy the filter.
- Add idx_github_task_prs_pr_number so the lookup is index-backed
instead of a full scan (pr_number is the 3rd column of the existing
UNIQUE constraint, unusable as a leading key).
- Log instead of silently dropping a task when GetTask fails in the
PR-match loop.
* test(github): dedup PR-lookup test setup into shared newTestStore
Add workspace_id to newTestStore's tasks table and drop the near-identical
newTestStoreWithWorkspaces helper, per review feedback.
* perf(tasks): batch-fetch PR-matched tasks instead of N+1 GetTask
Add a repository GetTasksByIDs and use it in augmentWithPRMatches so PR-number
search loads all matched tasks in one query instead of one GetTask per id,
addressing the N+1 noted in review. Fetch+filter is extracted into a
fetchPRMatchedTasks helper that preserves resolver order and dedup.
* feat(diff): use stored base_branch for diff stats + per-task compare picker
Task-card additions/deletions and the Changes panel were computed against a
hardcoded origin/main → master priority list inside agentctl. For tasks
branched off a release/staging branch this inflated the counts by every
commit since the actual fork point, and the Changes panel grouped unrelated
files alongside the task's real work.
This wires the per-repo task_repositories.base_branch end-to-end into the
agentctl WorkspaceTracker so each repo's diff stats resolve against the
recorded base instead of the integration-branch fallback. A picker on the
Changes panel branch hover card lets the user change the base mid-task; the
new value is persisted via PATCH /tasks/:id/repositories/:repo_id, pushed
live to the running agentctl instance, and the session's cached
base_commit_sha is cleared so the commits panel + cumulative diff refetch
against the new base without a session restart.
Falls back to the existing origin/main → master list for legacy tasks
(empty base_branch) and to the branch tip when no merge-base exists with
HEAD (unrelated histories — local rebase backups, etc.) so the stats and
commits panels stay anchored on the same SHA in every failure mode.
* fix(agentctl): sanitize user-controlled base_branch refs before git exec
CodeQL flagged the picker's user-controlled base_branch payload reaching
exec.Command("git", ..., baseBranch) inside workspace_git_cmd.go as a
command-built-from-user-controlled-source vulnerability. A malicious caller
could smuggle a leading-"-" argument like "-upload-pack=..." that git
itself reinterprets as a flag, even though exec.Command keeps args
separate from the shell.
Adds an IsSafeGitRef sanitizer at every boundary the value crosses on its
way to git: the service write path, the agentctl HTTP handlers
(/workspace/base-branches, /git/log, /git/cumulative-diff), and
WorkspaceTracker.SetBaseBranch itself. Unsafe values are rejected at the
service tier and silently downgraded to the no-override fallback inside
agentctl so a misbehaving caller can't half-break the tracker.
* fix(diff): address PR review blockers and CI lint
- Split UpdateRepositoryBaseBranch into validate/load/apply helpers to drop
cyclomatic complexity below the cyclop limit that gated Run Backend Tests.
- Replace direct m.cfg.BaseBranches reads/writes with getBaseBranches /
setBaseBranches under a dedicated RWMutex. UpdateBaseBranches used to
write under repoTrackersMu while rescan + lazy-subpath callers read under
workspaceTrackersMu, leaving an unsynchronized data race on the map.
- Drop the false 'PR target is auto-wired' claim from the MCP tool
description — GitOperator.CreatePR takes baseBranch as an explicit arg
and never reads the tracker's value.
- Picker no-op guard now compares against currentBase instead of storedBase
so selecting the displayed fallback (legacy task before any picker
change) is treated as no-op instead of triggering a spurious save.
- HTTP handler now maps non-validation service errors to 500 instead of
400, classifying via the existing isValidationError helper plus the new
unsafe-git-ref message.
* fix(diff): regex-based ref sanitiser at every git subprocess sink
CodeQL kept flagging workspace_git_cmd.go:43 even after SetBaseBranch
rejected unsafe values — the taint tracker doesn't follow sanitised stores
through struct fields, so it still saw user input flowing into
exec.Command("git", ..., baseBranch).
Switches IsSafeGitRef to a single regex check (a pattern CodeQL recognises
as a sanitiser barrier) and adds SanitizeGitRef calls inline at every
agentctl call site that splices a user-controlled ref into a git arg:
- workspace_git_status.resolveStoredRef (before the rev-parse probes)
- workspace_git_status.computeBaseCommit (before merge-base/rev-parse)
- workspace_git_status.getAheadBehindCounts (before rev-list)
- agentctl/server/api/git.go runGitLogForRepo + handleGitCumulativeDiff
(before computeMergeBase/GetRevParse on the HTTP TargetBranch)
Behaviour is unchanged for valid refs — only narrows the allowlist (now
[A-Za-z0-9_./-]) so the sanitiser barrier is recognisable to static
analysis. SetBaseBranch's field-store sanitiser stays as defence in depth.
* fix(diff): transform sanitiser at every map read for CodeQL taint flow
CodeQL still flagged workspace_git_cmd.go:43 because:
- handleSetBaseBranches used an IsSafeGitRef bool guard before a verbatim
map[k] = v copy. CodeQL recognises regex-transforming sanitisers but not
bool-guarded passthroughs.
- lookupBaseBranch returned m.cfg.BaseBranches[k] verbatim. Even though
the map was sanitised on write, taint flow across map stores + field
stores loses the sanitised state in the analyser.
Switches both sites to the transforming SanitizeGitRef helper so every
read produces a freshly-sanitised value before it flows to a downstream
git argument. Behaviour is unchanged for valid refs.
* fix(diff): regex transformer sanitiser + guard live push from empty map
CodeQL still flagged the previous SanitizeGitRef because it returned the
input string unchanged on success — an identity passthrough that the taint
tracker doesn't recognise as a sanitiser barrier.
Switches to safeGitRefPattern.FindString so the output comes from the
regex match (not the parameter). IsSafeGitRef now wraps SanitizeGitRef so
the predicate and the transformer share one allowlist.
Also addresses two Claude review blockers:
- collectTaskBaseBranches returns a nil/empty map when the task has no
recorded base_branches; pushing that to agentctl wipes every tracker's
override. Now skipped — the DB row is the source of truth for the next
session launch.
- applyBaseBranchSideEffects now runs on context.WithoutCancel so an HTTP
/ WS request cancel after the task_repositories UPDATE commits can't
leave session.base_commit_sha stale + the live agentctl tracker map
un-pushed, drifting from the persisted row.
* fix(diff): share securityutil.IsValidBranchName + harden error classification
CodeQL still flagged the picker's regex sanitiser as taint passthrough.
Refactors SanitizeGitRef / isSafeBaseBranchRef to delegate to the existing
securityutil.IsValidBranchName helper that agentctl's Rebase / Merge /
RenameBranch already use without being flagged. The shared allowlist also
fixes a Claude review blocker: 'feature/@2024' used to pass the service
validator but get dropped by the agentctl-side check at push time,
silently wiping every tracker's override.
Plus the two error-classification blockers Claude raised on the previous
HEAD:
- WS handler (task_ws_handlers.go wsUpdateTaskRepository) now distinguishes
validation errors (surfaced verbatim) from internal faults (opaque
500-style message). HTTP path already did this via the existing
isValidationError helper.
- MCP handler (handlers.handleUpdateRepositoryBaseBranch) gets the same
treatment via a new isValidationError local to the mcp/handlers
package so raw service error strings stop leaking across the MCP
boundary.
* fix(diff): inline securityutil.IsValidBranchName at every git subprocess sink
CodeQL's interprocedural taint tracking wasn't recognising SanitizeGitRef
as a sanitiser even after it delegated to securityutil.IsValidBranchName
— the wrapper helper + map/field hops between source and sink kept the
flow tainted in the analyser.
Inlines the IsValidBranchName allowlist check (already used inline by
Rebase/Merge in git.go without being flagged) at every call site that
splices a user-controlled ref into a git subprocess argument:
- workspace_git_status.resolveStoredRef (before rev-parse --verify)
- workspace_git_status.computeBaseCommit (before merge-base / rev-parse)
- workspace_git_status.getAheadBehindCounts (before rev-list)
- agentctl/server/api/git.go runGitLogForRepo + handleGitCumulativeDiff
- agentctl/server/api/workspace_base_branches.go handleSetBaseBranches
Behaviour unchanged: same allowlist as Rebase / Merge / RenameBranch
already use. SanitizeGitRef / IsSafeGitRef survive as defence-in-depth
helpers for callers that want a one-line check; they delegate to the same
securityutil helper so the rules stay aligned.
* fix(diff): inline regexp.MatchString at every git subprocess sink
CodeQL still flagged workspace_git_cmd.go:43 even with the inline
securityutil.IsValidBranchName helper — the taint tracker apparently does
not follow into helper functions for the go/command-injection rule on
this path.
Hoists the regex to package-scope vars (safeBranchRefPattern in both
process and api packages) and calls regexp.MatchString directly at each
sink site. Behaviour is identical to securityutil.IsValidBranchName; only
the call form changes.
* fix(diff): SHA-shape allowlist on BaseCommit before downstream git diff
CodeQL still flagged workspace_git_cmd.go:43 because update.BaseCommit
is the OUTPUT of an earlier merge-base / rev-parse call whose argument
list contained a user-controlled branch ref — the analyser treats that
command's output as still tainted even when the input ref was sanitised.
Adds an inline 40-hex SHA-shape allowlist check in enrichWithBranchDiff
right before `git diff --numstat <update.BaseCommit>` so the sanitiser
barrier sits in the same function as the next subprocess call. Behaviour
is unchanged: merge-base / rev-parse already produce SHA-shaped output.
* fix(diff): async tracker refresh + tighten init spread order
Two CodeRabbit/Claude review fixes:
- UpdateBaseBranches stamps each tracker's new baseBranch synchronously
then runs RefreshGitStatus on a background goroutine instead of inside
the picker-save HTTP handler. Per-tracker git subprocesses can each
take ~3-5 calls; serialising them on the request goroutine made the
PATCH response wait for every refresh to finish. The picker UI re-fetches
via the existing WS stream once Refresh emits, so the handler doesn't
need to block.
- updateTaskRepositoryBaseBranch now spreads options.init BEFORE the
required method/body fields so an upstream caller's init overrides
can't replace the PATCH method or the base_branch payload. Matches
the convention deleteTask / moveTask already follow.
* fix(diff): narrow mcp isValidationError + opaque 500 + post-sanitize log count
Three final Claude review threads on the latest commit:
- mcp/handlers isValidationError drops the broad 'invalid' substring so
DB / IO errors whose messages happen to contain 'invalid' don't
misclassify as ErrorCodeValidation.
- task_http_handlers httpUpdateTaskRepository now logs the raw service
error server-side and returns an opaque 'failed to update task
repository' on the 500 path. Stops potential DB / IO detail leakage
through the HTTP boundary.
- workspace_base_branches debug log reports accepted + rejected counts
(post-sanitisation) instead of the pre-filter total so the metric
actually reflects what hit UpdateBaseBranches.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* fix(worktree): promote FallbackBaseBranch when BaseBranch is empty
CreateRequest.Validate previously hard-rejected an empty BaseBranch even
when the caller supplied a FallbackBaseBranch. The fallback is plumbed
specifically so a missing primary branch can degrade into the repo's
default — this lets that path actually fire.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(task): probe provider default branch in add_branch resolve path
Adds an opt-in ProviderDefaultBranchProber seam (impl wired in cmd/kandev)
and threads a ResolveProviderDefaults flag through TaskRepositoryInput so
the add_branch_to_task GitHub-URL path can resolve a real default_branch
before writing the Repository row. Also backfills the existing repo's
default_branch when the probe succeeds and the workspace already had a row
with an empty value. The create_task path keeps its zero-default contract
(executor still backfills after clone).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): surface add_branch_to_task failures instead of silent orphans
AddBranchToTask used to return a success envelope even when the
post-insert worktree materialize step failed on a live task. The
task_repositories row stayed in place with no on-disk worktree, and
provider-URL flows also left an orphan repositories row behind.
Three coordinated changes:
- Gate empty base_branch after resolution with a typed error so no row
is written when nothing can be materialized.
- Track whether the repository row was created by this call and roll it
back on any subsequent failure.
- materializeBranch now returns its error; on a live worktree-executor
task, AddBranchToTask rolls back the task_repositories row and surfaces
the failure. Pre-launch tasks keep the legacy best-effort path so the
next session launch still materializes via the multi-repo prepare flow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(mcp): classify add_branch base_branch resolution failure as validation
AddBranchToTask now returns a "cannot resolve base_branch" error when the
provider repo's default branch could not be probed. Map it to
ErrorCodeValidation so MCP agents see a user-fixable input issue rather
than an opaque internal error.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): defer task.updated until after worktree materializes
Publishing task.updated before materializeBranch ran meant a failed
materialize on a live task would push the new task_repository row to WS
clients and then silently roll it back, leaving stale UI state until the
next poll. Move the event after materialize success so the bus only sees
durable rows. Test now also asserts no task.updated fires on the rollback
path. Renames stubProber.lastProvid to lastProviderArg for clarity.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): emit repository.deleted on add_branch orphan rollback
Cleanup callback previously called repoEntities.DeleteRepository directly,
which soft-deletes the row but bypasses Service.DeleteRepository's event
publish. The create path emitted repository.created, so skipping the
delete event left WS subscribers and frontend caches holding a phantom
row after a resolve-then-fail sequence. Route through the service method
so the events stay symmetric. Test now asserts the symmetry.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): skip provider probe when workspace already has the repo
resolveRepoInput's add_branch probe fired on every add_branch_to_task
call with a github_url, even when the workspace already had the
provider repo registered with a non-empty default_branch. The existing
row's value would win seconds later via the repo.DefaultBranch fallback,
so the remote git ls-remote round-trip was pure waste — and unnecessarily
hit network on every call. Peek at the workspace registry first and
short-circuit when a usable default_branch is already on file.
Also adds a QA-tier test file covering probe-error fallthrough, bad URL
rejection, registered-repo probe skipping, empty-default backfill, and
the repository_id fast path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): detach rollback paths from caller ctx, log probe-lookup errors
Two adjacent robustness fixes flagged on PR #1264:
1. resolveRepoInput silently discarded the GetRepositoryByProviderInfo
error before the provider probe. A transient DB failure was
indistinguishable from a clean "not found" lookup, so the code would
pay for a network probe instead of failing fast. Surface the error in
logs and skip the probe — FindOrCreateRepository below already hits
the same DB and will return the real cause.
2. The repository-create cleanup callback in resolveBranchAddRepoRef and
the task_repositories rollback in AddBranchToTask both captured the
caller ctx for their DELETE queries. Rollback often runs precisely
because that ctx was cancelled (timeout, client disconnect), and
reusing it would kill the cleanup and orphan the row we just created.
Use context.WithoutCancel so the rollback survives ctx death.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): close orphan-row gaps from caller cancel and concurrent create
Two findings from Claude's review on PR #1264:
1. (blocker) materializeBranch called taskAlreadyLaunched(ctx, ...) after
MaterializeBranch returned, using the same caller context that often
failed the materialize in the first place. A cancelled ctx made the
post-failure DB lookup return (nil, err), taskAlreadyLaunched returned
false, and the live-task rollback path silently demoted itself to the
pre-launch best-effort branch — leaving the orphan task_repositories
row the PR exists to prevent. Snapshot the launch state BEFORE
MaterializeBranch (launch state can't change during the synchronous
call) so the rollback decision is anchored to a live-ctx answer.
2. (suggestion) resolveBranchAddRepoRef inferred "this call created the
repo" by comparing the resolved ID against a workspace ListRepositories
snapshot taken before FindOrCreateRepository. A concurrent add_branch
for the same GitHub URL could create the row between snapshot and
lookup; the second request would treat it as "not in my snapshot, must
be mine" and register cleanup against the other request's data. On any
later failure, cleanup would DELETE a repository this call didn't
create and emit a spurious repository.deleted event.
Thread an explicit `created bool` out of CreateRepository through
FindOrCreateRepository → resolveRepoInput → ResolveRepositoryRef so
the cleanup callback fires only when this call physically inserted
the row. The flag is set at the CreateRepository / FindOrCreateRepository
sites themselves and cannot be spoofed by concurrent activity.
resolveRepoInput's branches were extracted into resolveRepoInputGitHub /
resolveRepoInputLocal helpers to keep the parent function inside the
cyclomatic-complexity and cognitive-complexity budgets after the signature
change.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* chore: retrigger cubic CI
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* feat(mcp): accept repository_url and local_path on add_branch_to_task_kandev
Mirror create_task_kandev's repo-locator surface so agents can attach a
branch without first looking up the repository UUID. The MCP tool now
takes repository_id OR repository_url OR local_path; the service
resolves alternatives via the same workspace-scoped find-or-create
path used by create_task.
* fix(mcp): run executor guard before repo resolution on add_branch_to_task
ResolveRepositoryRef may FindOrCreateRepository / CreateRepository
inside the github_url / local_path paths. Running it before
requireWorktreeExecutorForBranchAdd let a rejected add_branch call
on a docker/sprites/SSH task leak an orphan Repository row into
the workspace.
Move the executor check ahead of resolution and add a regression
test that asserts ListRepositories count is unchanged after a
rejected call with a brand-new github_url.
* test(mcp): assert task_id default in add_branch local_path test
* fix(mcp): reject multiple repo locators on add_branch_to_task
resolveRepoInput applies a silent precedence (repository_id >
github_url > local_path), so an agent that accidentally supplies
two of the three locators got a behaviour change with no signal.
Reject at the WS handler with a clear error so the mistake is
surfaced.
Also refresh the AddBranchToTask docstring to document the new
LocalPath / GitHubURL inputs and to correct the workspace-membership
check ownership (now enforced by ResolveRepositoryRef → resolveRepoInput
for the alternative paths).
* fix(mcp): classify resolve_repository errors as validation, not internal
Failures from ResolveRepositoryRef are user-fixable input mistakes
(malformed URL, unknown local_path, cross-workspace repository_id).
Without a matching case the wrapper "resolve repository: ..." message
fell through to ErrorCodeInternalError, so an agent that supplied
e.g. a bitbucket URL saw a server-fault code instead of a validation
error it could correct.
* fix(mcp): narrow add_branch error classification + use wire field name
Two follow-ups to the round-3/4 review feedback:
- Mutual-exclusion error mentioned the MCP tool alias `repository_url`
but the WS handler sees the wire field `github_url`. A direct WS
caller would see an error naming a field it never passed.
- The broad `"resolve repository: "` prefix classified ALL wrapped
errors as Validation, including DB / system failures from
CreateRepository / ListRepositories inside ResolveRepositoryRef.
Narrow to specific user-fixable patterns (GitHub URL parse failures,
cross-workspace repository_id) so genuine internal errors no longer
masquerade as validation rejections.
* fix(mcp): mutual-exclusion check at MCP tier names agent-facing alias
WS-tier rejection works for direct WS callers but its error mentions
github_url, the wire field — confusing for MCP agents that supplied
repository_url. Move the check up to addBranchToTaskHandler so the
error reads "pass at most one of repository_id, repository_url,
local_path" using the names the agent actually typed. WS handler
still validates as defense-in-depth.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Three areas were broken in the MCP add_branch_to_task flow:
1. Predictable branch names. autoBranchName counted up from existing
branch-N rows. Concurrent add_branch calls raced onto the same name
and the worktree directory leaked ordering. Now uses a random
branch-<3 random chars> suffix via worktree.SmallSuffix.
2. Sibling materialize did not flow to the UI. The materializer
published AgentctlReady with the NEW sibling worktree's path, which
the frontend handler wrote onto the session row — clobbering the
primary's worktree_id/branch and pointing the file browser at the
sibling instead of the task root. Added TaskWorkspacePath to the
payload, detected the sibling case on the frontend (existing
worktree_id != payload's), kept the primary's id/branch, repointed
worktree_path to the task root, bumped commits refetch, and dropped
the pre-multi-repo legacy git-status entry so the Changes panel
stops surfacing the frozen single-repo snapshot. File browser's
resetKey now includes the worktree count so the tree reloads when
the sibling lands.
3. workspace_path promotion + agentctl rescan refused to act on
historical envs. A few envs had workspace_path pointing at the
source repo's local_path (orchestrator computeWorkspacePath fallback
to req.RepositoryPath when resp.WorktreePath is empty) instead of
the primary worktree. The materializer's promotion gate compared
against env.WorkspacePath's parent, so those envs were never
promoted, and agentctl's resolveRescanPath only accepted
parent-of-current so the rescan to the real task root was rejected.
Trackers stayed on the wrong directory and the sibling's commits
never appeared in the Commits panel even after a full reload.
Anchored promotion on env.TaskDirName (basename cross-check) and
added a recovery branch to resolveRescanPath that accepts any
absolute directory which actually contains git-repo subdirs — the
bearer-token middleware already gates the endpoint and
scanRepositorySubdirs validates the children, so the relaxed check
stays safe.
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* feat(tasks): multi-branch tasks — N (repo, branch) pairs per task
Extends multi-repo into multi-branch so a single task can hold multiple
worktrees on the same repo (one per branch). Sibling worktrees layout at
<task>/<repo>/ + <task>/<repo>-<slug>/, dedicated PRWatch per branch,
live agentctl tracker rescan + frontend store updates so the UI splits
PRs / files / commits per branch without a session restart. MCP
add_branch_to_task_kandev tool is shielded to the worktree executor.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web): unify multi-branch repo label as <repo> · <branch> across panels
PR Changes and Commits panels rendered repo labels differently for multi-branch
tasks — Commits showed "kandev · feature/x" while PR Changes leaked the raw
"kandev-feature-x" agentctl tracker tag. Reformat tracker-tagged repo names via
formatRepoLabel using the longest known-repo prefix so kandev-cli-* doesn't
collapse to kandev · cli-*.
* fix(tasks): address multi-branch PR review — data races, slug collisions, MCP error codes
Backend
- agentctl process.Manager: add repoTrackersMu RWMutex guarding repoTrackers
+ workspaceTracker. Reads snapshot under RLock; RescanRepositories builds
trackers first, takes Lock for swap/append. Validates newWorkDir via
os.Stat before publishing cfg.WorkDir.
- worktree.Manager: reject invalid explicit BranchSlug up-front; cache key
uses sanitized wt.BranchSlug so read/write paths are symmetric.
- worktree.store: narrow isDuplicateColumnError to "duplicate column name".
- task service AddBranchToTask: slug-collision guard rejects feat/a vs feat-a.
- orchestrator resolvePushRepo: two-pass exact-name match before subdir
prefix fallback so "backend" doesn't swallow pushes for "backend-admin".
- executor buildRepoSpecs: duplicate repos always get a non-empty BranchSlug
(falls back to branch-N when both branch fields sanitize to empty).
- MCP handler: classifyAddBranchError maps service errors to NOT_FOUND /
CONFLICT / VALIDATION_ERROR; add ErrorCodeConflict constant.
- MCP server: extract registerAddBranchToTaskTool, register in task mode
only (external mode contract: config tools + create_task_kandev).
- workspace_rescan handler: reject malformed JSON with 400 instead of
silently rescanning the current root.
- branch_materializer: split MaterializeBranch into prepare + finalize
helpers to satisfy the 80-line cap.
Frontend
- existingPrUrl returns undefined when a task has >1 PR so per-repo View PR
buttons take over (no silent linking to a sibling).
- formatRepoLabel checks exact known-repo match before prefix splitting so
"kandev-cli" isn't mislabeled as "kandev · cli".
- Repo chip key now includes base_branch so siblings differing only on
base render as distinct chips.
Docs
- multi-branch spec uniqueness wording aligned with the canonical 4-column
key (task_id, repository_id, base_branch, checkout_branch).
- worktree.CreateRequest.BranchSlug doc describes the sibling layout
(<repo>-<slug>) instead of the obsolete nested form.
* fix(tasks): scope slug-collision check to repo only + use errors.Is for ErrTaskNotFound
- service_branches: drop base_branch from the slug-collision check. Worktree
path is (repo, slug); two rows on the same repo cut from different bases
still collide on disk.
- service_branches: prepareBranchAdd wraps taskrepo.ErrTaskNotFound via
fmt.Errorf with %w so classifiers don't have to substring-match the
formatted task UUID.
- mcp handlers: classifyAddBranchError uses errors.Is(err, ErrTaskNotFound).
* fix(agentctl): sanitize rescan work_dir before os.Stat to clear CodeQL path-injection
CodeQL flagged the rescan endpoint as a path-injection sink (the
HTTP-supplied work_dir flowed straight into os.Stat and downstream
scanRepositorySubdirs). Add validateRescanPath which:
- requires the input to be a clean absolute path with no ".." segments
- rejects anything that isn't equal to or an ancestor of the current
cfg.WorkDir — the only legitimate use case is the branch materializer
promoting <task>/<repo>/ to <task>/
Defense in depth: agentctl binds to localhost, but any colocated process
could otherwise direct it at /etc or the user's home by POSTing
/api/v1/workspace/rescan.
* fix(agentctl): tighten validateRescanPath, close TOCTOU on existingTrackers, add tests
- Drop the strings.Contains(clean, "..") guard. filepath.Clean already
resolves traversal; the substring check rejects legitimate names like
/home/u/..hidden without adding defense (the ancestor check via
filepath.Rel is the real boundary).
- Drop the rel == "." branch in the ancestor check — early return for
clean == currentClean already covers identity.
- Read existingTrackers inside the write-lock section (not under RLock
then re-Lock) so two concurrent rescans can't both see 0 trackers and
double-bootstrap the multi-repo set.
- Add table-driven TestValidateRescanPath covering rejection paths
(relative, descendant, sibling, traversal-cleaned, empty input),
legitimate ancestor promotion, exact match, no-anchor first-launch,
and a /home/u/..hidden dotted-segment case.
* fix(agentctl): break taint flow into os.Stat — derive rescan path from cfg, not HTTP body
CodeQL's go/path-injection trace still flagged manager_rescan.go after the
prior sanitizer because the user-supplied newWorkDir flowed (after
validation) into os.Stat and then into cfg.WorkDir → tracker paths →
workspace_monitor os.Stat sinks.
Replace validateRescanPath with resolveRescanPath: it returns a path
DERIVED from currentWorkDir (no-op = currentClean, promotion =
filepath.Dir(currentClean)) and uses newPath only for comparison, never
as a source for the returned string. os.Stat now receives a path whose
provenance is trusted manager config.
Functionally the legitimate caller (branch materializer promoting
<task>/<repo>/ to <task>/) is unchanged.
* test(agentctl): make TestResolveRescanPath windows-portable
The Linux Backend Tests job passed but the Backend (windows) job rejected
every "absolute" case because filepath.IsAbs("/task/repo") is false on
Windows (no volume letter).
Build inputs via filepath.Join against absRoot() (filepath.Abs of "/" /
"\\") so the same table covers POSIX (`/...`) and Windows (`C:\...`)
without per-OS branches. Keep the traversal-after-Clean case POSIX-only
since filepath.Clean is the shared primitive and that input form needs a
volume to be considered absolute on Windows anyway.
* fix(agentctl): serialize RescanRepositories + re-check trackers under write lock
Two concurrent RescanRepositories calls could both observe an empty
tracker set (between the snapshot read and the bootstrap branch) and both
enter transitionToMultiRepoMode, leaking a duplicate bare-root tracker
and duplicate per-repo trackers. Same race in appendNewRepoTrackers would
double-append the same new child across both callers.
Fix:
- Add rescanMu sync.Mutex on Manager. Acquired for the full body of
RescanRepositories so the snapshot → branch → mutate sequence is
serialized. repoTrackersMu still guards individual field reads from
unrelated goroutines (subscribe/unsubscribe/poll-mode).
- appendNewRepoTrackers re-checks membership inside the write-lock
before appending and drops already-present trackers (Stop + detach
outside the lock). Defense in depth.
- Test: add `dotted segment is legal as promotion` case so the
..hidden-segment promotion path stays exercised.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(task/repo): split sqlite/base.go (1486 lines) into schema/migrations/queries
base.go grew to 1.85x the 800-line lint threshold by mixing the Repository
struct, schema initialization, ALTER TABLE migrations, recreate-and-copy
table rebuilds, and historical backfills/heals. Split along those seams:
- base.go (58 lines) keeps only the Repository struct, NewWithDB,
newRepository, Close, DB.
- base_schema.go owns the initSchema orchestrator, every init*Schema
function, ensure*Indexes, ensureRunnerProjectionTables, and the
plan-revision backfill that runs as part of initPlansSchema.
- base_migrations.go owns migrate*, recreateTable[Named], runMigrations,
the backfillRow type, and every backfill*/heal* function. Verbatim
function moves with no semantic changes.
- base_queries.go owns sqlLimitClause (still referenced by plan.go,
document.go, message.go).
To keep golangci-lint (new: true) green after the move:
- initSchema's 17 if-return chain becomes a for-each-step loop so
cyclomatic complexity drops from 19 to within the 15 limit.
- initInfraSchema and initSessionWorktreeSchema hoist their DDL strings
into package-level consts (infraSchemaDDL, sessionWorktreeSchemaDDL)
so each function body fits the 80-line funlen cap.
Step ordering in initSchema is preserved exactly (backfillTaskEnvironments
-> backfillTaskEnvironmentRepos -> healTaskEnvironmentWorkspacePaths ->
healDuplicateTaskEnvironments -> ensureTaskEnvironmentTaskUniqueIndex ->
healSessionTaskEnvironmentIDs) so existing prod DBs continue to migrate
correctly.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(task/repo): add BatchGetSessionsByTaskIDs to eliminate task-list N+1
Adds a single repository method that returns every task_session for a list
of task IDs in one chunked IN (...) query, grouped by task_id. The
workspace task-list endpoint previously needed three batched calls
(GetPrimarySessionIDsByTaskIDs + GetSessionCountsByTaskIDs +
GetPrimarySessionInfoByTaskIDs); with this loader the handler can derive
primary session ID, session count, and per-task session info from a
single round trip.
- buildInPlaceholders and chunkIDs land in base_queries.go.
sqliteMaxHostParams=500 keeps each chunk well below SQLite's
compile-time SQLITE_MAX_VARIABLE_NUMBER (999 on older builds, 32766
on newer).
- session.go gains BatchGetSessionsByTaskIDs, which reuses
taskSessionSelectCols / scanTaskSessions / loadWorktreesBatch so the
returned sessions are indistinguishable from ListTaskSessions output
(worktrees populated, JSON snapshots decoded). Empty input
short-circuits with a non-nil empty map.
- SessionRepository interface and Service.BatchGetSessionsForTasks
expose the new method to the handler layer. The three existing
*ByTaskIDs methods are left in place because service_events.go still
uses them for single-task event publishing.
- mockRepository implementations updated in two test files so the
packages still satisfy the interface.
TestBatchGetSessionsByTaskIDs covers the empty-input short-circuit, the
multi-task (3 x 2) case (primary derivation + no cross-task bleed), and
the asked-for-but-missing case (absent from result map).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* perf(task/handlers): use BatchGetSessionsForTasks in task-list endpoint
buildTaskDTOsWithSessionInfo previously issued three batched queries per
request (GetPrimarySessionIDsForTasks + GetSessionCountsForTasks +
GetPrimarySessionInfoForTasks). Each was already chunked by task_id,
but together they were three round trips for data that can be derived
from one. Collapse to a single BatchGetSessionsForTasks call and derive
primary session ID, count, and per-task primary info in memory.
The JSON response shape is unchanged: dto.FromTaskWithSessionInfo
still receives the same pointer-typed arguments, primarySessionID stays
nil when no primary exists, and sessionCount stays nil for tasks with
zero sessions (matches the existing pointer-when-present contract that
the frontend store hydration depends on).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/handlers): restore JOIN-derived executor type/name in task-list response
buildTaskDTOsWithSessionInfo regressed when it stopped calling
GetPrimarySessionInfoForTasks: extractSessionInfo reads
ExecutorSnapshot["executor_type"] and ExecutorSnapshot["executor_name"],
but those keys exist only on the synthetic snapshot built by the
GetPrimarySessionInfoByTaskIDs LEFT JOIN to executors. The persisted
ExecutorSnapshot JSON uses different keys (e.g. "type" — see
share/builder.go:96), so BatchGetSessionsForTasks alone always yielded
empty executor_type / executor_name fields in the task-list response,
breaking the frontend task card's executor badge.
Fix (caught in code review):
- Handler now calls both BatchGetSessionsForTasks (for primary session
ID and session count) and GetPrimarySessionInfoForTasks (for the
JOIN-derived executor type/name and other session info). Two queries
instead of the original three; correctness preserved.
- New TestGetPrimarySessionInfoByTaskIDs_PopulatesExecutorJoinFields
seeds an executor + primary session, then asserts the JOIN populates
ExecutorSnapshot["executor_type"] / ["executor_name"] on the returned
session. Locks in the contract the handler depends on so a future
refactor that drops the JOIN fails loudly instead of silently
emitting empty fields.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): chunkIDs returns empty slice for empty input
chunkIDs previously returned [][]string{nil} for an empty/nil input
(a single chunk whose value is nil). The only current caller
(BatchGetSessionsByTaskIDs) short-circuits empty input before reaching
chunkIDs, so the bug stayed dormant — but any new caller that forgot
the short-circuit would feed a nil chunk to buildInPlaceholders (which
returns "" for nil), produce a `... WHERE task_id IN () ORDER BY ...`
query, and hit a SQL syntax error at runtime.
Make the helper safe by construction: an empty input returns nil
(empty outer slice), so `range chunkIDs(empty, n)` iterates zero
times. Add base_queries_test.go covering:
- Empty/nil input → no chunks (locks the safety contract).
- Single-pass input fits in one chunk.
- Over-threshold input splits into correctly-sized, in-order chunks.
- buildInPlaceholders normal + empty-input cases.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): propagate non-ErrNoRows errors in backfillSingleTask executor lookup
`backfillSingleTask` looked up `executors.type` for the legacy executor
referenced by a session and defaulted to `"local_pc"` on any error.
That silently masked driver failures, schema mismatches, and corruption
— every backfilled task_environment would get the wrong executor_type
without surfacing the underlying problem.
Narrow the default to the legitimate case: only `sql.ErrNoRows` (the
executor row was actually deleted, e.g. legacy session whose executor
is gone) falls back to `"local_pc"`. Any other scan error now aborts
the migration with a wrapped error so operators see the real cause.
Adds TestBackfillSingleTask_DefaultsExecutorTypeOnMissingRow which
seeds a session referencing a non-existent executor id and asserts the
backfill still completes with `executor_type = local_pc` — locks in
the legitimate-fallback path.
Addresses PR #1058 review feedback from cubic & claude.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): chunk ListWorktreesBySessionIDs to honor SQLite var limit
ListWorktreesBySessionIDs built its IN-clause from every input session ID
in one shot. BatchGetSessionsByTaskIDs chunks task IDs at 500 to stay
below SQLITE_MAX_VARIABLE_NUMBER (999 on older builds), but its
loadWorktreesBatch step then handed all sessions in that 500-task chunk
to ListWorktreesBySessionIDs un-chunked — so at modest workloads (500
tasks × ≥2 sessions each = 1000 placeholders) the query fails with
SQLITE_RANGE and bubbles up as a 404 on the task-list endpoint.
ListWorktreesBySessionIDs now applies the same chunkIDs / 500 cap that
BatchGet uses. Body extracted to appendWorktreesForSessionChunk so the
public method stays under the 80-line funlen cap.
New TestListWorktreesBySessionIDs_ChunksOverPlaceholderLimit feeds the
method 1001 non-existent session IDs and asserts it returns cleanly —
without chunking, this fails with SQLITE_RANGE on a default-built SQLite.
Also splits TestBatchGetSessionsByTaskIDs (was 98 lines) into focused
subtests + a shared seedBatchSessions helper, satisfying the test-size
convention. The three sub-scenarios (empty input, multi-task grouping,
missing-task absence) now fail in isolation.
Addresses PR #1058 review feedback from greptile (P1) and claude
(suggestion).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task/repo): port repositories.copy_files migration to split files
Rebased onto main; main added copy_files to runMigrations() and
initTaskSchema() in base.go while our branch had split those into
base_migrations.go and base_schema.go. Cherry-pick both additions
into the correct split files so the schema is consistent.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* fix(backend): inherit parent workspace for subtasks on all start paths
Subtasks with workspace_mode inherit_parent were provisioning a fresh
worktree and tasks folder instead of reusing the parent's. Two causes:
- propagateInheritedEnvironment ran only in PrepareTaskSession, so the
direct start path (startTask, used by MCP auto-start) never bound the
child session to the parent's TaskEnvironment. Moved it into
prepareSessionForStart so every launch entry point inherits.
- The service CreateTask path did not inherit the parent's repositories
when none were supplied (the UI omits them expecting inheritance), so
the child was repo-less and could not establish/reuse a worktree. Now
mirrors the MCP path: inherit RepositoryID + BaseBranch, drop
CheckoutBranch.
* fix(web): hide executor profile for inherit-parent subtasks
When a subtask inherits the parent's materialized workspace, its
executor is inherited too, so picking an executor profile is
meaningless. Hide the selector under inherit_parent and omit
executor_profile_id from the create payload.
* fix(backend): fail fast when subtask parent-repo inheritance lookup errors
Return the error from inheritParentRepositories instead of swallowing it:
a subtask silently created with no repositories would reintroduce the
fresh-worktree bug at launch. Also clarified that inheritance applies to
any repo-less subtask, matching the MCP path.
* fix(web): wire permission approval UI for Kandev MCP tools
KandevToolMessage adapter ignored the permissionMessage prop, so MCP tools
that block on a permission request rendered the result row but no Approve/
Deny buttons — users could not unblock the agent. Extract the shared
permission handlers into use-permission-handlers.ts and reuse them from
both ToolCallMessage and KandevToolMessage. KandevRow now also shows an
amber pending clock icon and hides the result-count summary while waiting
for approval so the row reads correctly before the result arrives.
Adds a mock-agent scenarioKandevMCPPermission emitting
mcp__kandev__list_workspaces_kandev plus a Playwright e2e and unit tests
covering the pending UI and the absence of "0 workspaces" while pending.
* fix(web): collapse tool + permission status into resolved Kandev row
After approve/reject the orchestrator stamps the decision onto the
permission_request message immediately, but the tool_call's own
meta.status stays "pending" until the next tool_call update lands.
KandevToolMessage previously passed meta.status straight to the renderer,
so the row kept the amber pending clock and the hidden-summary state for
the brief window between the two events. resolveKandevStatus now prefers
the permission decision once present, mapping approved -> complete and
rejected -> error.
Drops a redundant Playwright `.first()` after a toHaveCount(1) assertion
on the same locator. Adds unit coverage for the resolved-decision state.
* fix(web): keep Kandev tool status independent of permission decision
The previous fix collapsed an approved permission into tool status
"complete" and a rejected permission into "error". That was wrong on two
counts: an approved tool that's still running rendered as already done
(green check + visible result summary built from an empty payload), and
any later tool_call error was silently masked because the status had
already been forced to "complete".
Replace the status override with a separate display overlay. KandevRow
now reads a `KandevPermissionUIContext` ("pending" | "rejected" |
undefined) and uses it only to drive the waiting-on-user affordances —
amber clock, hidden summary — and a rejection mark that wins over the
tool's own success state. The renderer always receives the real
tool_call status, so a tool that's approved-but-pending still reads as
pending and a tool that errors after approval still renders the red X.
Adds explicit regression tests for the two race-window failure modes
plus the new rejected overlay.
* test(web): tolerate duplicate-render backend race in Kandev MCP e2e
CI shard 1 sometimes renders two approve buttons for the same Kandev MCP
permission because the orchestrator can create a second generic tool_call
message for the same tool_call_id alongside the kandev-routed one. Both
buttons resolve the same pending_id, so clicking the first unblocks the
agent either way.
The bug the test guards against is "no approve button at all" — the
strict toHaveCount(1) assertion was tying the test to that separate
backend issue. Relax to at-least-one and click the first.
* fix: persist Deny clicks as rejected, not approved
Backend RespondToPermission previously derived status purely from cancelled:
cancelled=true -> "rejected", otherwise "approved". Deny clicks sent
cancelled=false with a reject_* option_id, so they were recorded as
"approved". Add an explicit rejected flag from the WS request so the
backend can record "rejected" without taking the cancellation path (which
races against permission_cancelled -> "expired").
Also refactor permission-request-message.tsx to consume the shared
usePermissionResponseHandlers hook (the duplicated inline handler had the
same bug) and introduce a typed models.PermissionStatus enum on the
backend so status strings are not scattered literals.
* test(web): scope Kandev MCP permission e2e to the Kandev row
Previously the test clicked the first matching permission-approve button,
which could be a duplicate generic ToolCallMessage fallback rendered for
the same pending_id by a backend race -- a green test no longer proved the
custom Kandev approval UI rendered.
Add a `data-testid="kandev-tool-permission"` wrapper around the Kandev
action row and a `kandevPermissionApproveButtons` page-object locator that
scopes through it, then assert `toHaveCount(1)` so the test only passes
when the Kandev custom row actually mounts.
* chore(orchestrator): log rejected flag in RespondToPermission
Debug log was missing the new rejected param, making it impossible to
distinguish explicit Deny from dialog cancellation when triaging
permission-flow issues.