9722a396390809fa67252bbf59c49d05ac2de224
10 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Carl Sue
|
9722a39639 |
fix(ssh-executor): forward agent creds, fix terminal host config, restore linux/arm64 (#1559)
Co-authored-by: Carlos Florencio <carlosmflorencio@gmail.com> |
||
|
Carlos Florêncio
|
8d0493d1a4 | fix: persist session runtime config (#1346) | ||
|
Carlos Florêncio
|
86f756e280 | feat(workflow): add set_session_mode action and preserve mode across reset (#1188) | ||
|
Carlos Florêncio
|
0b2085688b | feat(office): autonomous agent management layer (#914) | ||
|
José Almeida
|
f3397b4ad7 |
feat: docker and sprites executor improvements (#738)
* feat(orchestrator): generalize task environment reuse across executor types
Worktree, container, and sandbox IDs now flow uniformly from a persisted
TaskEnvironment back into LaunchAgentRequest through a single helper. This
gives Sprites session-to-session reuse the same first-class treatment that
Docker already gained from the GitHub-token-injection PR, and lets a fallback
launch refresh the environment row instead of leaving stale IDs in the DB.
- applyExistingEnvironment propagates WorktreeID, ContainerID (via metadata),
and SandboxID (as sprite_name metadata) onto the launch request
- persistTaskEnvironment refreshes those IDs when the executor ends up
creating new resources (e.g. the previous container was pruned)
- extractSandboxID lifts the sprite identifier out of executor response
metadata so it can be persisted on the TaskEnvironment row
* feat(backend): add task-level reset environment action
Users sometimes need a clean slate — broken packages, stale caches, a
container that drifted into a bad state. Reset Environment is the explicit
escape hatch: tear down the recorded container, sandbox, and/or worktree
for a task and delete the TaskEnvironment row so the next session starts
fresh.
- service.ResetTaskEnvironment(taskID, ResetOptions) is the entry point.
ResetOptions.PushBranch optionally git-pushes the workspace branch
before teardown so committed work isn't dropped on the floor; a failed
push aborts the reset and leaves the environment intact.
- A new EnvironmentDestroyer interface in the task service hides the
per-resource teardown behind a single seam, implemented in cmd/kandev
by delegating to lifecycle.Manager (containers, sprites) and
worktree.Manager (worktrees, branch preserved).
- lifecycle.Manager.DestroyContainer / DestroySandbox dispatch to the
Docker and Sprites executor backends without leaking model types into
the lifecycle package.
- Reset is blocked while any session on the task still has an
ExecutorRunning row (returns ErrSessionRunning → HTTP 409). Per-resource
teardown is best-effort but the DB row is only removed once everything
is confirmed gone or already missing, so a partial failure is retryable
by clicking Reset again.
- Endpoint: POST /api/v1/tasks/:id/environment/reset.
* feat(web): add executor settings popover with reset environment action
A new button on the task top bar opens a popover showing the active
TaskEnvironment — executor type, status, container/sprite/worktree
identifiers, and a copy-ready 'docker exec' command for local Docker.
The popover hosts the destructive Reset Environment action so users have
one obvious place to inspect and manage the environment without
cluttering the New Session dialog.
The reset confirmation dialog requires explicit acknowledgement that
uncommitted changes will be lost. When the environment has a host-side
worktree it offers an opt-in 'push branch before resetting' checkbox so
committed work can be pushed first; the backend aborts the reset on
push failure.
- task-environment-api.ts: fetchTaskEnvironment + resetTaskEnvironment
- executor-settings-button.tsx: popover trigger + identity panel
- task-reset-env-confirm-dialog.tsx: destructive confirm with push opt-in
- task-top-bar.tsx: wire the new button into the right-side controls
- e2e: replace fresh-env-toggle test with reset-from-popover flow
* fix(docker): expand {workspace} placeholder in container WorkingDir
The agent runtime config carries `WorkingDir: "{workspace}"` for most ACP
agents. Mount sources were already expanded via expandMountSource, but
WorkingDir was passed through verbatim, so Docker rejected new containers
with:
Error response from daemon: the working directory '{workspace}' is
invalid, it needs to be an absolute path
Run the same expansion on WorkingDir, defaulting to /workspace when no
host WorkspacePath is set (the clone-inside-container case introduced by
PR #654).
* fix(docker-profile): persist Dockerfile/image_tag and apply tag override at runtime
Two bugs:
1. The Dockerfile editor and Image Tag input on the executor profile page
stored their values in component-local useState inside DockerSections,
not in the form state. Saving the profile never wrote them back, so
"Use defaults" / typing in the editor / changing the tag never
persisted — and the Build button was the only thing that consumed
them. The same gap existed in the new-executor flow's
buildProfileConfig.
Lift `dockerfile` and `image_tag` into useProfileFormState (edit) and
useCreateProfileFormState (new), and emit them in buildSaveConfig /
buildProfileConfig so they round-trip through profile.config.
2. Even when an image_tag is set on the profile, the container builder
ignored it. imageName was always derived from the agent runtime's
hardcoded `kandev/multi-agent`, so a user who built a custom image
like `kandev/agent:latest` would still see Docker fail with
"No such image: kandev/multi-agent:latest".
Propagate `profile.config.image_tag` → metadata
(`image_tag_override`) → ExecutorCreateRequest → ContainerConfig,
and let it override `rt.Image` in buildContainerConfig when set.
Also align the frontend default image tag (kandev/multi-agent:latest)
with the backend's hardcoded runtime default so users who don't override
end up with a working build.
* test(docker): cover container config build + Docker profile persistence
Adds two regression tests for the recent Docker fixes:
- container_config_test.go (Go unit): asserts buildContainerConfig
expands `{workspace}` in WorkingDir (defaulting to /workspace when no
host WorkspacePath is set) and that ContainerConfig.ImageTagOverride
takes precedence over the agent runtime's hardcoded `rt.Image`. No
Docker daemon required.
- docker-profile-persistence.spec.ts (Playwright E2E): creates a
local_docker executor + profile, opens the profile edit page, clicks
"Use defaults" to populate the Image Tag input + Dockerfile editor,
hits Save, then refetches the profile via API and reloads the page to
verify both fields round-trip through `profile.config`. Catches the
prior regression where DockerSections owned the form state locally
and never wrote it back. Runs against the existing E2E backend that
has KANDEV_DOCKER_ENABLED=false — we only test the persistence path,
not container creation.
Adds an api-client helper (`getExecutorProfile`) for the round-trip
assertion.
* feat(docker): self-contained Dockerfile + mount agentctl + capabilities adapter
Make the Docker executor work with a Dockerfile users can actually build,
without depending on a maintainer-shipped image:
- The container now launches a small bootstrap (`sh -c "$KANDEV_PREPARE_SCRIPT
; exec /usr/local/bin/agentctl"`) regardless of the image's ENTRYPOINT.
The agent CLI is no longer wired through container Cmd; agentctl receives
it later via its CreateInstance HTTP API.
- Host agentctl-linux binary is mounted into the container at
/usr/local/bin/agentctl via the existing AgentctlResolver. User-built
images don't have to bake it in.
- Default Dockerfile in the executor profile UI replaced with a working
node:22-slim + git + curl image — runs npx-based ACP agents (Claude,
Codex, OpenCode, Auggie) out of the box.
- lifecycleAdapter now exposes RequiresCloneURL / ShouldApplyPreferredShell
so the orchestrator can correctly identify containerized executors and
resolve the clone URL. Without this, applyRepositoryConfig short-circuits
on `e.capabilities == nil`, the cloneURL is never resolved, and the
prepare script fails with `repository '{{repository.clone_url}}' does
not exist`.
- applyRepositoryConfig also surfaces the resolved clone URL to script
metadata so the prepare script can interpolate {{repository.clone_url}}.
- docker.ContainerConfig gains an Entrypoint field, plumbed to the docker
client.
Verified end-to-end on a local stack with the new minimal image: the
container starts, bootstrap clones the GitHub repo, agentctl launches and
hands off to claude-acp inside the container.
* fix(docker): patient health check + resilient bootstrap
Two follow-ups to the Docker bootstrap work:
- The 30 retries × 500ms = 15s budget for agentctl health was too tight.
In the previous flow agentctl was a separate exec from the prepare
script, so it came up immediately. Now it runs after the prepare
script (which does git clone, optional installs), so first launch can
easily exceed 15s and produce a misleading "agentctl not healthy after
30 retries" error. Bumped to 240 retries (120s) and surfaced the last
underlying error in the message so failures point to the real cause.
- Prepare scripts commonly start with `set -e`/`set -eu`; running them
via `eval` propagated the option to the outer bootstrap shell, so any
failure killed the bootstrap before `exec /usr/local/bin/agentctl`.
Run prepare in a subshell so its `set -e` is contained, and start
agentctl regardless. If prepare fails, agentctl still comes up — the
host can connect, surface the failure, and let the user debug from
the Executor Settings popover.
* fix(executor-profile): persist remote auth secrets/credentials for Docker profiles
The Remote Credentials card (per-agent secret picker, plus the GitHub
credential checkbox) is rendered for any remote executor — Sprites,
local_docker, or remote_docker — but the save path in both the create
and edit pages only emitted `remote_auth_secrets` and `remote_credentials`
when `isSprites` was true. Selecting a secret for the Claude / Codex /
Auggie ANTHROPIC_API_KEY-style entry on a Docker profile updated form
state, the dropdown showed it as picked, but Save Changes silently
dropped the value before posting to the API. On reload the agent showed
as "Not configured", and any session start failed with
`{"code":-32000,"message":"Authentication required"}`.
Switch the guards to `isRemote` so the same data persists for all remote
profile types. The backend orchestrator already propagates
`profile.config.remote_auth_secrets` and `remote_credentials` through to
metadata for any containerized executor and resolves them via
`applyContainerCredentials` → `resolveAuthSecrets`, so no backend change
is needed once the values actually land in the saved profile.
* fix(executor-profile): live Configured badge + session/load resilience + live container status
Three independent fixes that all surface together while iterating on the
Docker executor flow:
- Remote Credentials card: the per-agent "Configured" / "Not Configured"
badge was driven by useState that only seeded once on mount. Picking a
secret in the dropdown updated the parent's `agentEnvVars` map but the
local `choice` never moved to `"env"`, so the badge stayed grey until
the page was reloaded. Derive `choice` straight from props every render
so the badge tracks live state.
- ACP session/load: when the agent process restarted between turns
(common with claude-agent-acp because its session map is in-memory),
the host's session/load call failed with JSON-RPC -32002 "Resource not
found" and the entire launch errored out. Treat that as the same kind
of "session is gone" signal as -32601 / capability=false and fall back
to session/new. Worst case the agent loses prior context; best case
the user just keeps typing.
- Executor Settings popover: dropped Execution ID and Environment ID
rows (debug-only noise users don't need), kept Container ID + the
copyable `docker exec -it … bash` line, added a live status badge
with tones for running / exited / paused / dead / error / missing,
and a 3-second polling interval so the badge follows the real
container state. New `GET /api/v1/tasks/:id/environment/live`
endpoint plumbs Docker `inspect` data through the lifecycle manager
→ task service → handler. ContainerLiveStatus mirror type at the
service layer keeps lifecycle types out of the public surface.
* feat(web): gate agent profiles by executor profile credentials
Filter the agent profile dropdown in both the Create Task dialog and the
New Session dialog to only show agents that are actually configured for
the selected executor profile.
For local/worktree executors, no gating (agents need no extra creds).
For Docker/Sprites profiles, an agent is "configured" iff one of its
remote-auth methods has a value in `remote_credentials` or a non-null
secret in `remote_auth_secrets`. Agents without an entry in the remote
auth catalog (Copilot, Amp, OpenCode, TUI, mock) cannot carry creds on
remote executors and are blocked.
Spec IDs match `AgentProfileOption.agent_name` (the registry-type string
like "claude-acp"); `agent_id` is a DB UUID and unrelated to the catalog.
The Create Task footer surfaces a "No agent profile is configured for X"
tooltip and disables submit when the selected executor profile has no
compatible agents. The New Session dialog auto-swaps to the first
compatible agent and shows the same banner inline.
`useRemoteAuthSpecs` returns a `loaded` flag so callers don't filter
during the initial fetch (would otherwise hide everything).
* feat(docker): make mock-agent runnable inside Docker for E2E
Lay the backend groundwork so the existing mock-agent can run inside
local_docker containers — needed for real-Docker E2E tests that don't
require Anthropic/OpenAI API keys.
Container builder bind-mounts a host mock-agent binary at
/usr/local/bin/mock-agent when KANDEV_MOCK_AGENT_LINUX_BINARY is set
(or build/mock-agent-linux-amd64 sits next to the kandev binary), the
same pattern already used for agentctl. MockAgent.BuildCommand always
resolves via PATH so the same command works on host (E2E PATH includes
bin/) and in containers (mounted at /usr/local/bin/mock-agent).
Mock now declares non-nil empty RemoteAuth so it counts as a
remote-capable agent. The remoteauth catalog includes specs even with
zero methods, and the frontend gating helper treats an empty-method
spec as "no credentials needed" — letting mock-agent pass the
configure-on-executor check that hides uncatalogued agents on remote
executors.
repositoryCloneURL falls back to the local origin remote URL when the
repo has no provider info, so local-only repos with a real remote
(including file:// remotes used in E2E) work on remote executors that
clone inside the container.
Makefile: build-mock-agent-linux target mirrors build-agentctl-linux.
* test(docker-e2e): add real-Docker Playwright project + first spec
A new Playwright project — \`docker\` — runs container-bound E2E specs
against a backend with KANDEV_E2E_DOCKER=1. The fixture probes for a
Docker daemon and skips the worker entirely when none is reachable, so
contributors without Docker can still run the rest of the suite.
The fixture builds a tiny kandev-agent:e2e image once per machine
(node:22-slim + git/curl), pre-seeds a local_docker executor profile,
and seeds a local repo with a file:// origin so the executor's
clone-inside-container path resolves without network access. A small
WS-based session.launch helper is added to the api-client for tests
that need to launch additional sessions on an existing task.
First spec — docker-launch.spec.ts — covers the smoke path: a session
launches in a real container, the task environment records its
container_id, and \`docker inspect\` confirms the container exists.
Two follow-up specs (multi-session env reuse + recovery from external
container removal) are wired up but marked test.fixme with comments
pinpointing the backend gaps that block them: persistTaskEnvironment
isn't called for workflow-prepared sessions (so task_environment_id
stays empty on those rows), and DockerExecutor.reconnectToContainer
loses the agentctl handshake auth token across launches (so reconnect
401s and falls back to a fresh container every time).
Run locally with: \`pnpm --filter @kandev/web exec playwright test
--config e2e/playwright.config.ts --project=docker\`.
* ci(e2e): add dedicated Docker E2E job
The new \`docker\` Playwright project needs a Docker daemon and the
linux/amd64 agentctl + mock-agent binaries bind-mounted into containers.
Pin the existing sharded job to chromium + mobile-chrome so the docker
project no longer leaks into every shard (where it would fail seeding
without KANDEV_DOCKER_ENABLED), and add an \`e2e-docker\` job that:
- Verifies the Docker daemon is reachable on the runner.
- Downloads the same backend artifact (now including the linux helper
binaries, built via \`make build-backend-linux-helpers\`).
- Runs \`playwright test --project=docker\` with KANDEV_E2E_DOCKER=1.
- Cleans up any kandev-managed containers at teardown so leaks don't
poison the next run.
* ci(e2e): include docker job in merged HTML report
Upload the docker job's blob report under the \`blob-report-*\` glob the
merge job already consumes, and add e2e-docker to e2e-report's needs so
the final HTML report covers both the sharded chromium runs and the
docker run.
* ci(e2e): add workflow_dispatch for ad-hoc runs and draft-PR verification
* fix(build): always produce linux/amd64 agentctl as part of \`make build\`
Remote executors (local Docker, remote Docker, Sprites) bind-mount the
linux/amd64 agentctl binary into the container. On non-Linux hosts (e.g.
macOS dev installs) running plain \`make build\` produced only the host
binary, so the first Docker session would fail with:
failed to build container config: agentctl linux binary not found
The top-level \`make dev\` already special-cased non-Linux hosts to chain
\`build-agentctl-linux\`, but \`make build\` and \`make start\` skipped it.
Add it as a dependency of the standard backend build so every install
ships a usable linux variant. Cross-compiling agentctl is fast (~1-2s)
and the binary is ~20 MB, so the cost is negligible.
Users who hit the error can run \`make build-backend\` (or \`make build\`
in apps/backend) to regenerate; setting KANDEV_AGENTCTL_LINUX_BINARY
remains a manual override.
* fix(release): ship linux/amd64 agentctl in every release artifact
Remote executors (local Docker, remote Docker, Sprites) bind-mount the
linux/amd64 agentctl into the container. The release pipeline only
shipped a host-arch agentctl, so users who installed via the bundled
binaries (npm/Homebrew/etc.) hit the same "agentctl linux binary not
found" error the first time they tried a Docker executor — even on
Linux, since the resolver expects the -linux-amd64 suffix.
Changes:
- .github/workflows/release.yml: cross-compile agentctl-linux-amd64 in
the build-bundles matrix step (CGO off so it works from every host).
Bundle ships kandev + host agentctl + agentctl-linux-amd64 in
dist/kandev/bin/. The AgentctlResolver finds it next to the kandev
binary automatically.
- Dockerfile: same idea for the container image — produce both variants
in the Go builder stage and copy the linux-amd64 helper into
/app/apps/backend/bin/ so the resolver picks it up inside the image.
A previous commit added the same dependency to \`make build\` for local
dev installs; this commit closes the gap for end users.
* fix: address PR review feedback (CI, CodeRabbit, Greptile, Claude)
Backend:
- service_task_environments: fail closed when checkAnySessionRunning
errors so a transient DB hiccup can't bypass the running-session
guard and tear down a live container/sandbox; teardown is now truly
best-effort with errors.Join across container/sandbox/worktree, so a
failed Docker call doesn't permanently orphan the worktree on retry.
Adds tests for the running-check error path and the multi-resource
best-effort path.
- executor_execute: propagate GetTaskEnvironmentByTaskID errors instead
of silently launching a fresh environment that orphans existing
containers/worktrees; gate environment reuse on matching ExecutorType
so a profile switch doesn't pass stale PreviousExecutionID/container
IDs to the wrong backend.
- task_environment_handlers: reject malformed JSON on POST
/tasks/:id/environment/reset (still allow empty body) so a destructive
endpoint doesn't silently proceed with a bad payload.
- worktree (PushEnvironmentBranch): bound git push with a 30s context
timeout and disable interactive prompts via GIT_TERMINAL_PROMPT=0
so a stalled remote can't hang the request thread.
- manager_environment: explicitly call ensureClient() before
ContainerMgr() in DestroyContainer/GetContainerLiveStatus so a missing
Docker daemon surfaces as "docker unavailable" rather than the
generic "container manager not initialized".
- container: WorkingDir always uses the in-container /workspace path
rather than the host workspace path (Docker would happily start in an
unrelated directory in host bind-mount mode); bootstrap now logs the
prepare-script exit code so failures show up in container logs.
- docker/client: CreateContainerInteractive honors ContainerConfig.Entrypoint
so the same config struct produces consistent behavior on both creation
paths.
Frontend:
- executor-settings-button: extract useTaskEnvironment hook (component
shrinks below the 100-line limit); only treat 404 as empty env (other
errors no longer wipe a valid environment); track "loaded once" via a
ref so loadEnv doesn't depend on env state — that dep was creating a
new function identity on every successful poll, cancelling the
3-second interval and turning the popover into a tight loop hammering
/environment/live; copy-shell command uses sh instead of bash so it
works on user-built minimal images.
- task-reset-env-confirm-dialog: AlertDialogAction onClick calls
e.preventDefault() so Radix's auto-close doesn't dismiss the dialog
before the async reset completes (loading spinner now visible; close
is parent-controlled via onOpenChange).
- remote-credentials-card: track env method in selectedIds the same way
files/gh_cli_token are tracked, and let initialChoice match either
selectedIds OR envSecretId. First-time env-credential setup for an
agent that exposes both files+env was broken: clicking the env radio
never updated state, choice re-derived to "none", and the secret
picker disappeared before the user could pick anything.
- e2e/executor-reuse: select the acknowledge checkbox by label, not by
positional last(), so adding another checkbox to the dialog can't
silently target the wrong control.
Format pass on prettier-flagged files; gofmt fixed two whitespace
nits in lifecycle files.
* test(executor): cover applyExistingEnvironment executor-type mismatch guard
* fix(docker): connect agentctl through published ports
* fix(web): keep remote auth selection stable
* fix(docker): reuse task containers across sessions
* fix(docker): resume task environment after refresh
* fix(docker): track executor containers for cleanup
* fix(docker): explain missing agent credentials
* fix(docker): surface container launch progress
* fix(docker): stabilize container reuse and feedback
* fix(docker): show task titles in container lists
* fix(docker): use container icon for docker tasks
* fix(orchestrator): align environment reuse after rebase
* fix(sprites): reconnect sessions on existing sandboxes
* fix(docker): use container icon for local docker executor too
Local docker tasks were rendering the Docker brand "chip" mark while
remote docker uses the container glyph. Map both variants to
IconContainer so the executor surfaces look consistent.
* feat(sprites): provision a fresh sandbox when the persisted one is gone
Resuming a Sprites task whose sandbox was destroyed upstream returned
"sprite not found" and dead-ended the user. Detect the upstream 404 via
a typed ErrSpriteNotFound sentinel, mark the reconnect step skipped with
a user-facing warning explaining what happened, swap the prepare plan
in place to the fresh-provision shape, and continue the launch under a
new sandbox name on the same branch.
The progress plan is now mutable so the reporter can stream the fresh
steps live after the reconnect-then-fresh transition. Only the explicit
not-found case triggers fallback; other reconnect failures still
surface as before, and the fallback fires at most once per launch.
* feat(web): friendlier header for sandbox-recovered prepare runs
When the only warning on a completed prepare is the missing-sandbox
fallback notice, render "Environment prepared on a fresh sandbox" in
the header instead of the generic "Environment prepared with warnings".
The fallback row still carries its own amber warning callout so the
user understands why a fresh sandbox was provisioned.
* feat(web): unify executor surfaces in the right-side popover
The desktop task top bar carried a small cloud icon (RemoteCloudTooltip)
in the breadcrumb cluster while the right-side Executor popover showed
the same kind of info — two surfaces for one concept. Remove the cloud
icon from the desktop top bar; kanban cards, task list rows, and the
mobile top bar keep theirs since they have no popover.
The popover button now picks its icon by executor type (cloud for
sprites, container for docker, server for local PC) using a shared
getExecutorStatusIcon helper. While the prepare progress is preparing
the icon swaps to a spinner so the user can see at a glance that work
is in flight.
The popover content gains a Preparing-environment section that streams
"Step N of M: <step>", an amber inline note when the missing-sandbox
fallback is in progress, an Environment-ready row with duration on
success, and a failed-step summary on failure. Polling promotes to the
active 3s cadence while preparing so the icon flips to ready without
the user opening the popover.
* fix(docker): swap container glyph for a plain box icon
IconContainer's vertical ribbing reads as a microchip on small sizes.
IconBox is an unambiguous outlined cube. Use it for both docker
variants so the executor surfaces look like a box, not a chip.
* fix(orchestrator): preserve base branch on resume for clone-based executors
Sprites and Docker resumes were sending the launch request with an empty
BaseBranch, so the in-sandbox prepare script's `git clone --branch <X>`
shifted positional args and failed with "repository '/workspace' does
not exist". applyResumeRepoConfig only set BaseBranch inside the
worktree-specific block; widen that to all executors that require a
clone URL.
Local executors are intentionally left untouched: LocalPreparer reads
BaseBranch and forces a `git fetch && git checkout` against the user's
own workspace, which would clobber the "use current state" path.
* feat(sprites,docker): generate a kandev feature branch for clone-based executors
Sprites tasks committed straight onto the chosen base branch because
SpritesPreparer didn't populate WorktreeBranch and the orchestrator's
"forward env.WorktreeBranch on reuse" check only fired for Docker.
Mirror the Docker preparer's TaskBranchName generation in Sprites,
extract a shared `nonWorktreeTaskBranch` helper that uses a
deterministic suffix derived from the task ID (so legacy env rows that
predate this change resolve to the same branch on every resume), and
let the orchestrator forward env.WorktreeBranch for any clone-based
executor — Docker or Sprites.
* fix(sprites,docker): prefer existing remote feature branch on resume
When a sandbox is destroyed and we provision a fresh one for the same
task, the agent may have previously committed and pushed onto the
feature branch. The previous prepare scripts only ran `git checkout -b
{{worktree.branch}}` which would overwrite that progress with a fresh
branch off the chosen base.
Try `git fetch origin <feature>` first; on success, `git checkout -B`
against the remote tip so the agent picks up where it left off. Falls
back to a fresh local branch when origin has nothing.
Also add the same checkout block to the Sprites prepare script — it was
missing entirely, so every Sprites session was committing onto main.
* test(sprites): lock in informative branch name in fallback warning
Now that BaseBranch is preserved on resume for clone-based executors,
the missing-sandbox fallback warning detail names the actual branch
("Cloning … on the same branch main") instead of the "(unknown)"
placeholder. Add a regression test so a future change to the resume
metadata propagation can't silently regress that copy.
* fix(sprites): preserve sandbox on plain agent stop so resume is fast
StopInstance was calling sprite.Destroy() unconditionally, so every
session stop tore down the cloud sandbox. Resume then always fell into
the missing-sandbox fallback, re-cloned the repo, re-ran the prepare
script, and lost the agent's working tree. That's a 30s+ round-trip
for what should be "stop the process, then re-attach later".
Limit Destroy to terminal lifecycle reasons (task/session
deleted/archived), the same set runTerminalCleanupScript already uses.
Plain stops just close the proxy and leave the sandbox alive.
Also update the existing Docker e2e regex: the feature-branch suffix is
now a deterministic 6-hex-char prefix of the task UUID rather than a
random 3-char tail, so resume on legacy env rows lands on the same
branch.
* test(docker): cover stop + resume → same container, branch preserved
Adds a Docker e2e test that exercises the user-visible stop-then-resume
flow: launch session, stop it via WS session.stop, launch a fresh
session on the same task, and assert the same task environment +
container ID are reused and the kandev feature branch is preserved.
Also nudge the executor popover padding: when the prepare-status
section is rendered above the Sprites/Docker info block, the cumulative
top+bottom paddings looked too generous around "Sprites sandbox" /
"Local Docker". Tighten both sections vertically without affecting the
horizontal rhythm or the bottom action row.
* feat(web): show "Resuming session" feedback in popover during reconnect
The bottom Resume button on the chat panel was leaving users staring at
nothing for the 5-30s reconnect window: prepare-progress events are
intentionally suppressed on resume (the workspace is already there), so
the popover sat in the idle phase even while session.state was STARTING.
Synthesize a "resuming" phase from session state when no prepare events
are flowing, rendered as a spinner row in the popover with copy
"Resuming session — Reconnecting to the existing environment…". The
button icon also flips to the spinner so the toolbar advertises the
in-flight work without the user having to open the popover.
Extract the prepare-status reducer + section component into their own
file so the main popover module stays under the 600-line ESLint cap.
* fix(codex): align with the standard SessionDirTemplate pattern
Codex was the only agent that bind-mounted its host home into the
container via an explicit `Mounts: [{home}/.codex → /root/.codex]`
entry, while every other ACP agent uses `SessionConfig.SessionDirTemplate`
+ `SessionDirTarget`. Move codex onto the same surface so the
host-state isolation work in the next commit covers it uniformly.
This change alone does not stop the host-state leak — the bind mount
still resolves to the host's ~/.codex for now — but it removes the
last agent-specific branch in the runtime config so the docker
container manager can apply one rule for all agents.
* fix(docker): isolate per-container agent state from the host home
Every ACP agent's session dir was bind-mounted from ~/.<agent> on the
host into /root/.<agent> in the container. That exposed host state DBs,
session caches, and lock files to the container — codex's rollout DB
caches absolute /Users/... paths, which don't resolve inside Linux and
the agent silently loses prior thread context on resume.
Replace the host bind mount with a kandev-managed per-container session
dir under <kandev-home>/agent-sessions/<instance_id>/. Before the
container starts, selectively copy the auth-relevant files (the same
files Sprites already copies via RemoteAuth.SourceFiles) into that
dir; everything else — state DBs, sessions/, lock files — stays on the
host and the agent rebuilds them inside the container with
container-local Linux paths.
The change is agent-agnostic: any agent that has SessionDirTemplate
+ SessionDirTarget gets the new behavior automatically. Cleanup runs
on destructive stops only (task/session deleted/archived), mirroring
the Sprites preserve-on-stop rule so plain stops let resume re-attach
to the same agent state.
* fix(executor): make the kandev feature-branch checkout an invariant postlude
Profiles created in the UI snapshot the *then-current* DefaultPrepareScript
into their stored prepare_script field. Updates to the default — like
shipping the worktree-branch checkout block — never reach those older
profiles, so users keep landing the agent on the chosen base branch
(main) even though the env row carries a feature branch name.
Append a kandev-managed postlude to whatever prepare_script ran (custom
or default), wrapped in a subshell + `|| true` so it's idempotent and
never blocks agentctl from starting. The postlude prefers the remote tip
when origin already has the branch (resume after a destroyed sandbox),
falls back to checking out the existing local branch, and finally
creates one off the current HEAD.
Sprites needed the WorktreeProvider in resolvePrepareScript so the
postlude's `{{worktree.branch}}` actually expands; Docker already had
it.
The Docker e2e gains a regression case that explicitly stores an older
default-style script (clone, no checkout) and asserts the agent still
ends up on the feature branch — locking the contract in regardless of
which default the user happens to have stored.
* fix(web): tighten executor popover padding under the env header
The Sprites/Docker info block under the Environment-ready row had too
much vertical breathing room — the header-to-fields gap and the
inter-row spacing piled up and the popover felt airy. Trim the section
to match the snug rhythm of the rest of the popover (px-3 py-2,
1.5-unit gap before the field list, 1-unit gap between rows). Also
unify the Environment-ready row from p-3 to px-3 py-2 so the dividers
between sections sit at the same vertical cadence.
* fix(web): tighten executor popover bottom padding too
The previous tighten only fixed the top half — pb under the field rows
plus the Reset-row's full p-2 still left a generous gap below the last
"Sprite ..." line. Same fix applies whether the popover is showing
Docker or Sprites.
EnvironmentInfo: pt-2 pb-1.5 (was py-2) so the bottom field hugs the
divider, and the Reset-row goes from p-2 to px-2 py-1.5 so the button
sits closer to the text above.
* fix(web): drop the redundant Environment-ready row + tighten popover top
The READY badge next to the executor name already conveys ready-state;
the dedicated "Environment ready · 12s" row above the executor info
just added vertical noise. Skip rendering for the ready phase (other
phases that surface non-redundant info — preparing, resuming, failed —
still render). Drop top padding on the executor info section now that
nothing sits above it on the happy path.
* fix(web): move executor info to the left top bar, hover-to-open, no border
The executor section is informational, not a button — readiness state +
sandbox/container/branch fields. Move it to the left top bar (next to
the integrations menu) where it sits alongside the other contextual
info, drop the outline-button styling, and switch from click-to-open to
hover-to-open via HoverCard with 150ms open / 250ms close so the cursor
can travel to the destructive Reset button without flickering.
The trigger is a borderless icon-with-status-dot span; tabIndex keeps
it keyboard-accessible. Reset still works — it opens the existing
confirmation dialog independently of the hover card.
Tests: pointerEnter instead of click for the hover-to-open path.
* refactor(cleanup): drop dead code, dedupe predicates, unify token injection
Tier 1 of the post-review cleanup. Each item is independently safe; bundling
because they're all small, mechanical, and lint-passing.
- fix(clone): unify injectTokenIntoURL across Docker and Sprites — Sprites
used to ignore GH_TOKEN entirely (a user with only GH_TOKEN set got 401
on Sprites clone but worked on Docker). Promote one
`injectGitHubTokenIntoCloneURL` helper, accept both env vars
(GITHUB_TOKEN wins, matching Docker), and use the documented
`https://x-access-token:T@github.com/` form on both surfaces.
- fix(executor-popover): swap the <span tabIndex role="button"> trigger
for <Button variant="ghost"> so Enter/Space activation, focus rings on
Safari, and disabled semantics come for free.
- test(docker): rewrite TestDockerStopInstance_PreservesSessionDirOnPlainStop
to drive the real DockerExecutor.StopInstance path with ContainerID=""
(skips the docker daemon, exercises the kandev-side cleanup branch).
Previous version only iterated shouldRunExecutorCleanup strings — would
pass even if StopInstance always cleaned up. Now table-driven over
preserve+destructive reasons with on-disk asserts.
- refactor(orchestrator): drop dead `_ = arg` parameters from persist*
helpers (persistResumeState, persistModelSwitchState, persistLaunchState).
Brings signatures from 9→6 args, under the funlen lint cap.
- refactor(orchestrator): collapse byte-identical isContainerizedExecutor
≡ isCloneBasedExecutorType predicate into one.
- refactor(lifecycle): drop dead getMetadataBool, FileUploader.RunCommand,
expandMountSource {home} arm (no production agent ships {home} in
Mounts; codex_acp_test asserts it), dockerTaskBranch one-line wrapper.
* refactor(scripts): postlude owns worktree-branch checkout
Strip the inline `git checkout -B` block from the Docker and Sprites
default prepare scripts. The kandev-managed postlude
(KandevBranchCheckoutPostlude) is appended unconditionally after every
user prepare script, so keeping the same logic inline made the default
and the postlude two sources of truth that could drift.
* refactor(lifecycle): drop dead instance_port persistence entry
`instance_port` is only used as a zap log field — it's never written to
the executor metadata map, so carrying it across resume in
`persistentMetadataKeys` was a no-op.
* refactor(lifecycle): drop legacy {home} session-dir fallback
ExpandSessionDir kept a `{home}/<dotdir>` fallback for the case where
kandevHomeDir was unresolved. In production, ResolvedHomeDir() always
returns a non-empty path, so the fallback only ever fired in tests
that hadn't been updated to pass an instance ID. Returning the empty
string in that case makes container.go skip the bind mount — the
correct behaviour, since without a kandev home there's no session dir
to mount.
* refactor(orchestrator): collapse env-reuse helpers into reuseExistingEnvironment
The two env-reuse helpers (`applyExistingEnvironment` and
`applyExistingEnvironmentRuntimeMetadata`) were always called together
and shared the same intent: carry the previous TaskEnvironment forward
into the launch request. Merge them into a single
`reuseExistingEnvironment(ctx, req, env)` so the executor-type gate
runs once for both env-level fields and runtime metadata, and callers
have a single entry point.
Document the layered metadata rule (running wins for container_id;
env wins for sprite_name and other stable IDs) inline so the next
reader doesn't have to reverse-engineer it from two functions.
* refactor(web): lift prepare-summary reducer + isFallbackNoticeStep into lib/prepare
Move the popover's prepare-summary reducer (and the
`isFallbackNoticeStep` helper duplicated word-for-word in
`prepare-progress.tsx`) into `apps/web/lib/prepare/summarize.ts`. The
hook moves to `hooks/domains/session/use-prepare-summary.ts` to match
the project's domain-organized hook layout.
The popover's PrepareSummary type and the chat panel's EffectiveStatus
serve different UIs, so the panel keeps its own `deriveStatus` — only
the literal duplicate (`isFallbackNoticeStep`) is shared.
* refactor(web): split executor-settings-button by concern
Slice the 471-line button file into three modules with single
concerns: the popover shell stays in `executor-settings-button.tsx`
(168 lines, just trigger + popover layout + icon/status dot),
`executor-environment-info.tsx` owns the env detail rows + status
badge, and `hooks/domains/session/use-task-environment.ts` owns the
fetch/poll/reset lifecycle alongside other session hooks.
* refactor(e2e): extract docker + session helpers from docker-launch.spec
Pull the inline docker CLI helpers (`dockerInspectExists`, `dockerStop`,
`dockerCurrentBranch`, etc.) and the generic session-state pollers
(`waitForLatestSessionDone`, `waitForSessionDone`,
`waitForSessionEnvironment`) into `e2e/helpers/docker.ts` and
`e2e/helpers/session.ts`. The spec drops from 763 to 647 lines and the
helpers can be reused by future docker / session tests.
* test(scripts): execute postlude under bash -e against a real git repo
Pair the static-content assertion with a behaviour test that runs the
postlude as a real shell script. Three scenarios exercise the three
branches inside the snippet: remote tip exists (track origin), no
remote (fresh local branch), and already on the target branch
(idempotency). This catches regressions where the snippet still parses
as bash but no longer does the right thing — wrong refspec, missing
-B, swallowed exit code, etc.
* test(sprites): integration check for stop preserve + resume reconnect path
Each piece of the resume-fast path is unit-tested separately
(StopInstance keeps the token cache, spritesShouldReconnect reads
sprite_name, the reconnect plan has 3 steps). This new test wires them
together end to end so a future change that accidentally strips
sprite_name on stop or forgets to look at metadata on launch fails
loudly here, not at runtime.
* test(sprites): assert plan ordering instead of absolute indexes
Replace `plan.index(spriteStepWaitHealthy) == 1` with an
`assertPlanOrder` helper that checks "X runs before Y". The contract
the test guards is the order of create-sprite → wait-healthy →
agent-instance, not their absolute slot numbers — adding a new step
shouldn't break the test if the order is preserved.
* test(web): hoist test constants above vi.mock factories
Move SESSION_ID and friends above the vi.mock factories so the mock
closures don't depend on vitest hoisting magic capturing TDZ-undefined
locals. The previous layout worked because factories aren't invoked
until the module under test is imported (after const initialization),
but a refactor that imports earlier would break the closure silently.
* fix(seeder): contain localFileUploader writes inside the session root
CodeQL flagged go/path-injection on the localFileUploader.WriteFile
sink: instanceID flows into the write path, and a malformed value
would let writes escape the kandev session root and clobber arbitrary
host files. Bind the uploader to its session root and reject any path
that filepath.Rel resolves to a "../" escape. Production callers
always pass an internally generated instanceID; the check is defense
in depth against a future caller plumbing in user input.
* refactor(docker): split reconnectToContainer + cover reconnect helpers with unit tests
Address recurring review feedback on the docker reconnect path:
- reconnectToContainer was 98 lines (over the 80-line repo limit). Split
into ensureContainerRunning (inspect + start + re-inspect) and
bringupAgentctl (health-check, find-or-create instance, transparent
re-handshake). The orchestration body now reads top-down at 49 lines.
- resolveDockerEndpoint and waitForAgentctlHealth grew real branches in
this PR (host-port lookup with container-IP fallback; 240×500ms
retry loop) but had no direct tests. Introduce narrow hostPortLookup
/ healthChecker interfaces, satisfied by *docker.Client and
*agentctl.ControlClient, so both functions are now driven by stubs
that exercise happy-path, fallback, retry-until-healthy, exhaustion,
and context-cancellation branches.
- Add direct unit tests for the docker package's pure helpers
(normalizeDockerHostIP, buildDockerPortBindings) and for
dockerAgentctlPortBindings — a regression in the published port
range or host IP would silently break container reconnect.
* test(handlers): cover ensureShellExecution stale-execution recovery
The recovery branch (Failed execution → CleanupStaleExecutionBySessionID
→ relaunch) is the load-bearing piece of shell session resilience and
had no direct test. Extract the body into a free function that takes a
narrow shellLifecycle interface so the four branches are testable
without standing up a real lifecycle.Manager:
- happy path (running execution, no cleanup)
- stale recovery (Failed → cleanup → fresh)
- initial GetOrEnsureExecution failure
- cleanup failure must NOT trigger a re-launch loop
- relaunch failure surfaces a clear "recover execution" error
* fix(backend): clear lint blockers from CI lint job
CI's only-new-issues lint surfaced three real items left over from
recent additions:
- container.go bootstrap snippet had two `fi` shell tokens flagged by
dupword. Tagged with the same nolint directive used by the
KandevBranchCheckoutPostlude (two distinct shell blocks closing).
- DockerExecutor.CreateInstance was 89 lines (over funlen 80). Split
the body into helpers: reportCreateInstanceProgress (deferred
progress reporter), tryReconnect (gates the resume path),
seedSessionDir (per-container auth seed), buildContainerLaunchConfig,
and buildCreatedInstance. CreateInstance is now a 30-line top-down
orchestrator.
- executor_execute.go was 887 effective lines (over revive 800). Move
reuseExistingEnvironment + its helpers (latestExecutorRunningForEnv,
executorRunningMatchesEnvironment, applyExecutorRunningMetadata,
ensureLaunchMetadata) into a sibling executor_environment_reuse.go.
* fix(web): only block submit during real env prepare, not every STARTING
The "agent still being set up" submit gate was triggering on every
session that briefly transitions through STARTING — including local
quick-chat, which has no prepare phase and has its agent live within
~100ms. The eager-init quick-chat e2e tests (chat/quick-chat.spec.ts
and chat/message-queue.spec.ts) wait for the editor to become
editable, then press Cmd+Enter. The race made wrappedSubmit a no-op
exactly when the test was firing — message dropped, agent never saw
it, downstream assertions failed.
Split the merged isStarting flag in useSessionState: keep the broad
flag (still used for the workspace-prep loading UI), and expose
isPreparingEnvironment as a separate signal that's only true while
prepareProgress.status === "preparing". Thread it through chat-input-
area → chat-input-container → useChatInputContainer and gate the
submit-disabled tooltip on it instead of the broad isStarting.
Net: Docker / Sprites bootstrap still surfaces the "agent still being
set up" message and disables submit; quick-chat / local sessions stop
silently dropping in-flight messages.
* fix(web): keep editor disabled during STARTING so quick-chat sends don't race
My previous fix made submit no longer block on isStarting, with the
goal of keeping local quick-chat sessions from silently dropping
messages. The trace from CI showed it traded one failure for another:
the editor became contenteditable while the session was still
STARTING, the e2e suite pressed Cmd+Enter immediately, and the
backend rejected with "Failed to send message to agent" because the
agent process wasn't ready yet.
Restore the original semantics — STARTING blocks both editor and
submit — but keep `isPreparingEnvironment` as the narrower trigger for
the "agent still being set up" tooltip. Net behaviour:
- STARTING transition: editor disabled, no tooltip (signal is the
disabled state itself)
- container/sandbox prepare: editor disabled + tooltip explaining why
- quick-chat sessions: editor stays disabled until RUNNING, no race
* docs(web): correct isPreparingEnvironment JSDoc after STARTING re-block
The
|
||
|
Carlos Florêncio
|
9ee42b53e3 | fix(orchestrator): abandon orphan turns on session resume (#837) | ||
|
João Salavisa
|
a510b46e4e |
feat(multi-repo): support tasks spanning multiple repositories (#767)
* feat(task): add task_environment_repos schema and model for multi-repo support
Phase 0 of multi-repository task support: introduces the per-repository
child table and model alongside legacy single-repo fields (dual-write,
no behavior change). Lays the foundation for the orchestrator/lifecycle
refactor in subsequent phases.
- New task_environment_repos table with FK CASCADE on task_environments.
- New task_dir_name column on task_environments (idempotent ALTER).
- TaskEnvironmentRepo model + Repos slice + RepoFor helper on TaskEnvironment.
- CRUD methods + interface extension; env getters preload Repos.
- Idempotent backfill from legacy single-repo task_environments rows.
- Tests cover round-trip, CRUD, preload ordering, embedded create, cascade
delete, and backfill from a legacy-shaped row.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(lifecycle): add Repositories list to LaunchRequest and EnvPrepareRequest
Phase 1.1 of multi-repository task support: extends the lifecycle types
with explicit per-repo lists, while keeping the legacy single-repo
top-level fields as the synthesized fallback. No caller behavior changes
yet — preparers still see length-1 specs for single-repo launches.
- LaunchRequest.Repositories []RepoLaunchSpec + RepoSpecs() helper.
- EnvPrepareRequest.Repositories []RepoPrepareSpec + RepoSpecs() helper.
- EnvPrepareResult.Worktrees []RepoWorktreeResult for per-repo outcomes.
- runEnvironmentPreparer forwards req.Repositories into the prepare
request, inheriting the request-level RepoSetupScript when each
per-repo entry has none.
- Tests cover explicit-list precedence, synthesized fallback, and
repo-less requests.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(worktree,lifecycle): support multiple worktrees per session
Phases 1.2 and 1.3 of multi-repository task support. The pieces are
intertwined so they ship together — the preparer's per-repo loop
depends on the manager being able to hold one worktree per
(session, repository) pair instead of one per session.
Worktree manager:
- In-memory cache key changes from sessionID to (sessionID|repositoryID).
- New MultiRepoStore optional capability + SQLite implementation:
GetWorktreesBySessionID and GetWorktreeBySessionAndRepository.
- New Manager methods: GetAllBySessionID, GetBySessionAndRepo. Existing
GetBySessionID returns the first match (single-repo callers unchanged).
- Manager.Create's "already exists" check is now repo-scoped so the
second repo's create no longer returns the first repo's worktree.
- All cache write/delete sites updated to the composite key.
WorktreePreparer:
- New prepareMultiRepo path activated when EnvPrepareRequest.Repositories
has >=2 entries; single-repo and repo-less behavior is byte-identical.
- prepareOneRepo runs validate -> sync -> create -> fetch-PR -> per-repo
setup-script for each spec; rolls back already-created worktrees on
any failure.
- Workspace path becomes the task root (parent of any repo subdir);
legacy WorktreeID/WorktreeBranch/MainRepoGitDir mirror Worktrees[0]
for downstream code that hasn't been migrated yet.
- Per-repo setup script runs verbatim (no script-engine resolution
yet — the per-repo placeholder namespace lands in a follow-up).
Tests:
- Manager: GetAllBySessionID, GetBySessionAndRepo (hit + miss),
GetBySessionID single-repo compat, cache key separation.
- Preparer: multi-repo creates one worktree per repo; rollback removes
active worktrees on partial failure; per-repo setup script runs in
each worktree directory and emits its own step.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(orchestrator): resolve all task repos and persist per-repo rows on launch
Phase 1.4 of multi-repository task support: the orchestrator now reads
every repository linked to a task, forwards the full list through the
adapter into the lifecycle layer, and persists one TaskEnvironmentRepo
plus one TaskSessionWorktree row per repo when the launch is multi-repo.
Single-repo and repo-less tasks keep their previous code path verbatim
(dual-write — legacy single-repo fields stay populated from the primary).
- New resolveAllRepoInfo / resolveTaskRepoInfo on the executor; primary
is the first by Position.
- buildLaunchAgentRequest takes both the primary repoInfo and the full
list, populating req.Repositories []RepoSpec only when length > 1.
- New RepoSpec / RepoWorktreeResult on the orchestrator's executor
package mirror the lifecycle types so the adapter can translate
between them without leaking lifecycle types into the orchestrator
public API.
- Adapter (cmd/kandev/adapters.go) forwards req.Repositories into
lifecycle.LaunchRequest and surfaces per-repo prepare results back
on LaunchAgentResponse.Worktrees.
- persistTaskEnvironment writes env.Repos in the same create
transaction; persistTaskEnvironmentRepos handles the existing-env
reuse path. TaskEnvironment.TaskDirName is now persisted.
- persistWorktreeAssociation loops over resp.Worktrees in multi-repo,
inserting one row per repo with its own RepositoryID.
- ResumeSession now also populates req.Repositories from task repos
and stamps the existing TaskDirName so the preparer reuses the same
task root.
- repoStore / executorStore interfaces extended with the new repo and
env-repo CRUD methods; mocks updated accordingly.
Tests:
- LaunchPreparedSession with two task repositories populates
req.Repositories in order and keeps legacy single-repo top-level
fields filled from the primary.
- The same launch persists one TaskEnvironment + 2 TaskEnvironmentRepo
+ 2 TaskSessionWorktree rows.
- Single-repo launch still produces zero entries in req.Repositories
and exercises only the legacy fields.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(agentctl): git endpoints accept optional repo subpath for multi-repo
Phase 2 of multi-repository task support: every per-call git endpoint
gains an optional `repo` field (form param for GET, JSON for POST) that
selects a sub-directory of the workspace. Empty `repo` = workspace root,
preserving single-repo behavior verbatim.
- Manager.GitOperatorFor(subpath) returns a per-subpath GitOperator
(cached). Validates the subpath against path traversal, absolute
paths, and missing directories.
- New api server helper gitOpForRepo() emits a 400 with a per-operation
GitOperationResult on invalid subpaths.
- Repo field added to: pull, push, rebase, merge, abort, commit,
rename-branch, stage, unstage, discard, create-pr, revert-commit,
show-commit, reset, log, cumulative-diff. (git/status still reads
from the workspace tracker — that endpoint will gain multi-repo
support when the tracker itself is split per repo.)
- Tests cover empty subpath, valid subpath caching, traversal
rejection, and missing-directory rejection.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/comments): scope diff comments by repository for multi-repo tasks
Phase 3 of multi-repository task support: comments now carry an
optional repositoryId so two repos with the same file path render
their own comment threads instead of bleeding together.
- CommentBase.repositoryId (optional, backwards compatible).
- getCommentsForFile gains an optional repositoryId arg; legacy
comments without a repositoryId match any repo filter so persisted
data keeps showing.
- Diff store interface in lib/diff/types.ts mirrors the new arg.
- Tests cover per-repo filter, omitted-arg fallback, and legacy data.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(github): per-repo PR association on task PRs and watches
Phase 4 of multi-repository task support: github_task_prs and
github_pr_watches gain a repository_id column so multi-repo tasks can
have one PR per repo without colliding on (task_id) uniqueness.
- Idempotent ALTER TABLE adds repository_id to both tables.
- TaskPR.RepositoryID and PRWatch.RepositoryID model fields.
- New GetTaskPRByRepository and ListTaskPRsByTask lookups; existing
GetTaskPR keeps single-PR semantics for callers not yet migrated.
- ReplaceTaskPR's delete is scoped by repository_id when set so a
multi-repo task replacing one repo's PR no longer wipes the other.
- Tests cover per-repo storage and scoped replace.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web): foundations for multi-repo task UI
Phase 5 of multi-repository task support: primitives the upcoming UI
work needs without changing any visible behavior yet.
- TaskRepository.checkout_branch surfaces the optional PR head branch
field that the backend already exposes.
- primaryTaskRepository(repos) picks by lowest Position so consumers
match the backend's "primary" semantics instead of `[0]`.
- New useTaskRepositories(taskId) / useTaskPrimaryRepository(taskId)
hooks read the live kanban task and return its repos sorted by
position. Future kanban/diff/UI consumers should use these instead
of poking task.repositories directly.
- Tests cover lowest-position selection and empty/single-repo edge cases.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web): kanban card shows multi-repo "+N" chip and hydrates full repo list
Phase 6 (subset) of multi-repository task support. The kanban now
exposes the per-task repository list to the UI and renders a compact
"+N" badge on cards whose tasks span more than one repository.
- KanbanState.tasks[].repositories slim shape (id, repository_id,
base_branch, checkout_branch, position).
- SSR mapper hydrates the full list and uses primaryTaskRepository()
to pick the position-aware primary instead of [0].
- useKanbanData passes repositories through to the card props.
- KanbanCard renders the primary repo name with a small "+N" chip
when len(repositories) > 1; tooltip names the count.
- useTaskRepositories / useTaskPrimaryRepository hooks return the
slim KanbanTaskRepository shape so multi-repo consumers share one
read path.
Larger UI surfaces (task-create dialog, diff view, file browser,
mobile sheets) still target the primary repo only — they will be
ported as the multi-repo task creation flow lands. No visible change
for single-repo tasks.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(task): reject duplicate repositories on multi-repo task create
Phase 8 of multi-repository task support: surface duplicate-repository
input as a clean validation error instead of letting the unique
(task_id, repository_id) constraint surface mid-loop with some rows
already inserted.
- createTaskRepositories tracks seen repository IDs and returns
"repository <id> listed more than once for the task" before any
CreateTaskRepository call.
- Tests cover the rejection path and confirm two distinct repos still
succeed with both rows persisted in Position order.
Repository discovery and per-repo cloning were already covered by
Phase 1.4 (resolveAllRepoInfo loops ensureRepoCloned) and the
existing repository_discovery service is repo-list aware by design.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/task-create): repeatable repository rows for multi-repo task creation
Users can now actually create a multi-repo task: a "+ Add repository"
button below the primary repo + branch selectors expands the form with
additional (repository, base-branch) rows. Each extra row picks from a
filtered repository list that excludes the primary and any other already-
chosen extras, so duplicates are impossible to enter.
- ExtraRepositoryRow type + form-state hook (extraRepositories, add /
remove / update / reset). Lives in its own file so the main state hook
stays under the file-length lint cap.
- ExtraRepositoryRows component renders the rows and the "+ Add" button;
per-row branches are loaded on demand via the existing
useRepositoryBranches hook.
- buildRepositoriesPayload accepts the extras and appends them after the
primary, dropping rows with empty repository_id silently so an
unfinished row does not block submit. The backend's duplicate-repo
validation (Phase 8) catches anything that slips through.
- DialogFormBody is split: CreateModeSelectors (selectors + extra rows)
and useDialogHandlers move to dedicated files, keeping touched files
under the lint thresholds.
- Tests cover the multi-repo payload (ordering, drop-empty, no-primary
recovery, single-repo unchanged) and the existing
store-multi-repo.test.ts gets named constants to satisfy the
no-duplicate-string rule.
Verified: pnpm exec tsc --noEmit clean, vitest 608/608 green,
eslint --max-warnings 0 clean.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(agentctl): per-repo workspace tracker for multi-repo git/status
The git/status endpoint now accepts an optional ?repo=<subpath> query
param that selects a sub-directory of the workspace, completing the
per-repo plumbing started in the multi-repo phase. Single-repo callers
keep the workspace-root behavior unchanged.
- Manager.GetWorkspaceTrackerFor(subpath) returns a per-subpath
WorkspaceTracker (lazy + cached). Validation reuses a new
resolveSubpath helper shared with GitOperatorFor, so both code paths
reject path traversal / absolute paths / missing dirs the same way.
- Per-subpath trackers are NOT started (no polling goroutines); the
multi-repo path uses them only for synchronous GetCurrentGitStatus
queries which fall through to getGitStatus when no cache is present.
This keeps per-repo cost cheap.
- handleGitStatus reads c.Query("repo") and routes through the new
resolver, returning a 400 with an error payload on invalid input.
- Tests cover empty subpath (root), valid subpath caching, traversal
rejection.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/review): group file tree by repository for multi-repo task changes
The review file tree now renders per-repo top-level nodes when a task's
changes span multiple repositories, so the same file path in two repos
no longer collapses into a single ambiguous entry.
- ReviewFile.repository_id and ReviewFile.repository_name (optional)
identify which repo each file belongs to. Single-repo callers leave
them unset and the tree falls back to the existing flat grouping.
- buildFileTree splits into buildMultiRepoTree (when 2+ distinct
repository_names are present) and buildFlatTree (the original logic).
Repo roots have isRepoRoot=true and a repositoryId for downstream
filters; their children are full path subtrees per repo.
- collapse() skips repo roots so a repo with a single changed file
still shows its repo header.
- ReviewFileTree renders repo roots with a stronger label, a top
border, and an "N files" count badge; data-testid="repo-root-node"
for E2E coverage. File-level rendering is unchanged.
- Tests cover the flat-tree fallback (no repo info, single repo),
multi-repo grouping, repo-root pinning, and same-filename-different-
repos isolation.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/task-top-bar): "+N" repo chip on multi-repo task header
The task page top-bar breadcrumb now shows a small "+N" chip next to the
primary repository name when the task spans more than one repository,
matching the kanban-card treatment introduced earlier. Hover surfaces the
exact count via tooltip ("frontend (+2 more repos)").
- resolveTaskProps populates repositoryCount from task.repositories.length.
- TaskTopBar threads repositoryCount through to the new
RepositoryBreadcrumb subcomponent.
- The chip carries data-testid="topbar-extra-repo-count" for E2E
selectors.
- TopBarLeft was nearing the function-length / complexity caps; the
breadcrumb extraction restores headroom for future additions.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web/task-create): disable "Add repository" when no other repos available
When the user only has the primary repository in their workspace,
clicking "+ Add repository" used to insert a row whose dropdown was
empty — looking like a bug ("no other repos show up"). The button now
disables itself when there are no remaining workspace repositories to
choose from, with a tooltip explaining why ("All workspace repositories
are already added"). The previous "primary not selected" guard is also
surfaced via tooltip.
- ExtraRepositoryRows computes remainingCount = repos − used (primary
+ already-added extras) and gates the Add button on it.
- New computeAddButtonHint helper returns a per-state title string for
the disabled cases.
- Tests cover: dropdown shows the unused workspace repos when opened
(the click path the user reported wasn't actually broken — the gate
was just missing); Add button disabled when only the primary exists.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(agentctl): workspace tracker falls back to first repo subdir for multi-repo task roots
The "Changes" panel was empty for multi-repo tasks because the
agent's workspace path is the task root — a plain holder directory
that holds one git worktree per repository as siblings. The workspace
tracker tried to run git commands against that bare root and silently
failed, so no git status updates ever reached the UI.
The tracker now detects this at construction: when the configured
workDir isn't itself a git repo, it falls back to the first immediate
child directory that is. The user gets the primary repo's changes in
the panel; cross-repo aggregation is a follow-up.
- preferGitRepoChildIfRootIsBare scans os.ReadDir entries (skipping
hidden / non-directory entries) and returns the first that has a
valid git index. Logs an info line when the rewrite happens so it's
visible in the agentctl log.
- Repo-less tasks (e.g. quick chat) and single-repo tasks keep their
previous behavior verbatim — the fallback only fires when the root
itself fails resolveGitIndexPath.
- Tests cover: fallback when the workdir is a multi-repo holder,
no-fallback for a real git repo, no-fallback when no git child
exists.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(multi-repo): per-repo workspace tracking — Changes panel shows all repos
The agent's workspace tracker is now split per-repository for multi-repo
task roots. Each repo gets its own tracker that polls git independently
and stamps its repository name onto every emitted event. The Changes
panel aggregates files from every repo and groups them under per-repo
headers using the file-tree machinery from Phase 6.
Backend (agentctl):
- GitStatusUpdate / FileListUpdate gain a RepositoryName field. Empty
for single-repo workspaces (legacy clients see no change).
- WorkspaceTracker carries repositoryName and stamps it onto every
emitted status/file-list. Two constructors: NewWorkspaceTracker for
the legacy single-repo path (with the bare-root fallback) and
NewWorkspaceTrackerForRepo for explicit per-repo trackers.
- Manager scans direct child directories for git repos at construction.
When 2+ repos are found, builds one tracker per repo subdir on top of
the root tracker (which stays bound to the bare task root and emits
nothing useful). Single-repo workspaces are unchanged.
- Manager.SubscribeWorkspaceStream / UnsubscribeWorkspaceStream fan out
one client subscription across the root + all per-repo trackers via
AttachWorkspaceStreamSubscriber / DetachWorkspaceStreamSubscriber on
the tracker. The WS handler switched from the single-tracker subscribe
to the manager fan-out.
- Tests cover: per-repo trackers spawn for multi-repo task roots,
single-repo doesn't, both repos emit GitStatusUpdates tagged with
RepositoryName.
Frontend:
- GitStatusEntry / GitStatusData carry repository_name (optional).
- session-runtime gitStatus.byEnvironmentRepo new map keyed by env id
then repository name; setGitStatus routes per-repo updates into it
while still updating the legacy byEnvironmentId for single-repo
consumers. clearGitStatus drops both maps.
- migrateEnvKeyedData migrates the new per-repo map alongside the
existing keys when sessionId resolves to an environmentId.
- WS git-status handler forwards repository_name from event.status.
- New useSessionGitStatusByRepo hook returns sorted [{repo, status}]
pairs for the active session.
- task-changes-panel mergeReviewFiles iterates statusByRepo when
available, stamping repository_name onto every uncommitted file so
the Changes panel groups them under per-repo headers (using the
ReviewFile.repository_name plumbing from Phase 6).
- Tests: per-repo routing, no overwrite on sibling repo update,
legacy single-repo fallback, clear-on-cleanup.
Verified: pnpm exec vitest run 623/623, eslint --max-warnings 0 clean,
tsc --noEmit clean, make test (backend) clean, make lint 0 issues.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/changes-panel): per-repo group headers above each repo's files
The Changes panel now renders a sticky "frontend / N files" header above
the diffs from each repository so the user can visually distinguish
where each change lives. Single-repo tasks render unchanged (no header
shown when there's only one unnamed group).
- ReviewDiffList groups its file list by repository_name (preserving the
caller's order within each group), then renders one RepoGroupHeader
per group followed by the existing FileDiffSection list. Header gating
rule: show when len(groups) > 1 OR the single group has a non-empty
repository name.
- Group key uses "repo:path" so a file with the same path in two repos
no longer collides on React's reconciliation.
- groupFilesByRepository + RepoGroupHeader live in a sibling
review-diff-list-groups.tsx file to keep review-diff-list.tsx under
the 600-line lint cap.
- Tests cover: no header for plain (no repo_name) files, one header per
repo for 2+ groups, header shown even for a single named repo, file
paths land under the right group's section.
Verified: vitest 627/627, eslint clean, tsc clean.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(lifecycle): propagate RepositoryName through PublishGitStatus
The agentctl WorkspaceTracker stamps every per-repo GitStatusUpdate
with RepositoryName, but the lifecycle PublishGitStatus translation
into GitEventPayload was dropping that field. The orchestrator then
forwarded a status with empty repository_name, the frontend store
routed everything into the empty-key bucket, and the Changes panel's
multi-repo grouping never triggered — no header, no per-repo split.
- GitStatusData gains RepositoryName (omitempty so single-repo
payloads stay byte-identical on the wire).
- PublishGitStatus copies update.RepositoryName onto the payload.
- Test asserts the field survives the publish → subscribe round trip
via the in-memory event bus on the GitEvent.<sessionID> subject.
Restart the agentctl process for any running multi-repo task to pick
up the new field; new launches get it automatically.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(web/changes-panel): per-repo group headers in the dockview Changes tab
The Changes tab in the dockview panel (the Files / Changes (N) tab the
user actually interacts with — not the standalone Review dialog) was
still rendering a flat file list, so multi-repo task changes either
collided onto the legacy single-status (showing only one repo's files)
or rendered without grouping.
- FileInfo gains repository_name (optional, single-repo unchanged).
- useSessionGit aggregates files from useSessionGitStatusByRepo when
multi-repo data is present, stamping each FileInfo with its
repository_name. Falls back to the legacy single status for
single-repo workspaces. Aggregation extracted into
aggregateFilesAcrossRepos to keep useSessionGit under the 100-line
function lint cap.
- ChangedFile (changes-panel.tsx + changes-panel-timeline.tsx) carries
repositoryName through to the renderer.
- FileListSection delegates to a new FileListBody that groups rows by
repositoryName; renders a small per-repo subheader when 2+ repos OR
any single named repo is present, otherwise falls back to the
pre-multi-repo flat list (same DOM shape).
- Tests cover: no header for plain (no repo_name) files, headers
per repo for 2+ groups, single named repo still gets a label.
Restart the backend so the per-repo trackers spawn for in-flight
multi-repo tasks; new launches are unaffected.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(multi-repo): per-repo git ops, unified branch endpoint, chip-style task create
Bundles a string of multi-repo fixes and refactors that came up while
testing the feature end-to-end:
- workspace_path stored on multi-repo TaskEnvironment was one level too
high, so agentctl booted with the wrong WorkDir on cold start; fixed
in resolveTaskEnvWorkspacePath + GetWorkspaceInfoForSession.
- Stage/Unstage/Discard/Commit/Revert/Reset/Amend now thread `repo`
through agentctl client → WS handler → frontend hook → SessionGit
fan-out, so the right git repo is targeted (was running at the task
root, which isn't a git repo for multi-repo tasks).
- agentctl GitLog is multi-repo aware: when no `repo` is specified and
per-repo trackers exist, fans out one log per repo and merges sorted
newest-first with RepositoryName stamped on each commit.
- Per-repo grouping for files (Changes panel) and commits, with
collapsible group headers; commits section defaults to collapsed.
Algorithm extracted into one generic groupByRepositoryName helper
(was copy-pasted three times).
- Task creation dialog rewritten around a unified `fs.repositories[]`
list — no more "primary vs extras" split. Chip-style row with one
pill per repo + branch, "+" to add, x to remove, GitHub URL toggle
inline. Discovered (on-machine) repos appear in any chip's dropdown.
Removes ~6 fields and 3 helpers from the dialog state.
- Branch listing endpoints collapsed to one:
GET /workspaces/:id/branches?repository_id=X | path=Y
Frontend collapses to a single useBranches hook with a tagged-union
source. Drops two HTTP routes, two service methods, two API client
funcs, and one whole hook file.
Tests added across the chain: workspace_path resolver, sort-commits-
by-date, manager poll-mode propagation, RepoSubpaths, chip grouping
+ collapse + per-repo isLatest, group-by-repo helper, dialog payload
builder + chip wiring + discovered-repo flow.
* feat(multi-repo): unified per-repo git controls for all VCS operations
Changes panel and top-bar VCS button render per-repo Stage all, Commit,
Unstage all, Push, Pull, Rebase, Merge, and Create PR uniformly across
single-repo and multi-repo workspaces. Operations route to the correct
git repo subpath; fan-outs collect per-repo results and surface partial
success in the toast layer.
Backend:
- Stamp RepositoryName on Reset/BranchSwitch/FileChange notifications
and forward through orchestrator handlers
- Surface per-repo errors from handleGitLogMultiRepo via PerRepoErrors
Frontend:
- pull/push/rebase/merge/abort/commit fan out via PerRepoOperationResult
- Per-repo group headers always render with action buttons
- Top-bar dropdown lists per-repo Pull/Rebase/Merge entries
- pendingStageFiles keyed per-repo to prevent cross-repo clears
- useRepoDisplayName distinguishes loading from multi-repo
- Commit dialog file summary respects stageAll
- New helpers: changes-panel-helpers.ts, changes-panel-repo-groups.tsx,
use-repo-display-name.ts
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(multi-repo): plumb repo through file/commit/diff endpoints; per-repo PRs and review UI
- backend: thread `repo` subpath through pull/push/rebase/merge/abort, file
content/update, cumulative-diff, and commit-show endpoints; per-repo
fan-out for log + cumulative-diff with each repo's own merge-base; emit
full `repositories` array on task.updated WS payload
- github: store/list TaskPRs as []*TaskPR (per-repo); orchestrator/web store
rekey to `Record<taskId, TaskPR[]>`
- web: aggregate PR icon (count badge + worst-of color, multi-PR tooltip);
branch hover card renders one row per repo with each repo's task base
branch; review dialog merges per-repo file maps with composite keys and
propagates repository_name through diff/expand/revert; commit-detail
panel scopes to the owning repo
- kanban card: chip row of repo names (up to 2 + "+N" overflow, tooltip
lists all)
- task-create dialog: gate non-worktree executors to multi-repo only; move
fresh-branch toggle inline next to the repo chips (icon-only, with
title/aria-label)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(multi-repo): scope PR watches/associations and review UI per repository
Schema: add repository_id to UNIQUE constraints on github_pr_watches and
github_task_prs (with idempotent copy-and-rename migration) so one task
spanning N repos can hold one watch/PR per repo without collisions.
Plumb repository_id through CreatePRWatch/EnsurePRWatch/AssociatePRWithTask
/AssociatePRByURL, fan TriggerPRSync across all per-repo watches, and
disambiguate status sync by (task, owner, repo, pr_number) instead of
"first match". Add Repo to wsCreateFile/Delete/Rename and wsCreatePR/
RenameBranch so file and git ops target the right working tree.
Frontend review dialog: switch reviewedFiles, staleFiles, fileRefs,
selectedFile and comment counts to NUL-separated `${repo}\x00${path}`
keys so same-named files in different repos no longer share state.
useTaskPR consumes the new {prs: TaskPR[]} envelope.
Also: snapshot repoTrackers slice before background refresh in
SetWorkspacePollMode to prevent races with Stop(), and key
mergeCumulativeFiles by NUL-separated (repo, path) to match.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* chore: apply prettier formatting
Unblock CI prettier check on files modified earlier on this branch
that pre-date the current prettier config.
* fix: address PR review feedback and unblock E2E
Backend:
- ListWorkspaceTaskPRs background sweep now uses TriggerPRSyncAll so
multi-repo tasks refresh every per-repo PR (was only the most recently
updated watch). Caught by claude review on #767.
Frontend (no behaviour change):
- Replace literal NUL byte (0x00) in FILE_KEY_SEP and the inline key
builder in use-review-dialog with the explicit escape so the
source is plain ASCII. The runtime separator is unchanged; this just
removes a footgun that GitHub's diff renders as a visible space.
- Show the auto-resolved branch as a small read-only pill next to the
GitHub URL input so the URL-mode dialog surfaces the branch the task
will run on (previously only the URL was visible).
E2E:
- changes-panel-focus / pr-detection / pr-switcher-changes: expand the
commits-section before asserting on commit text -- the section starts
collapsed since the chip-style refactor.
- repository-selector-scroll: open the popover via repo-chip-trigger
instead of the legacy single repository-selector testid.
* test(e2e): align task-create dialog tests with chip refactor
Updates three more tests that broke when the dialog migrated from a
single repository/branch combobox to per-row repo/branch chips and the
URL-mode toggle relabel:
- create-task.spec.ts (pre-select + remembers-selections): switch
repository-selector / branch-selector lookups to repo-chip-trigger /
branch-chip-trigger.
- create-task-github-url.spec.ts (toggle test): the inverse-state label
is now "use a workspace repository", not the legacy
"or select a repository".
No code changes — purely test alignment with the existing UI.
* fix(web): re-apply workbench-chrome topbar + restore branch-selector behaviour
Two regressions surfaced by the multi-repo merge into main:
1. task-top-bar.tsx had been resolved in our favour at the workbench-chrome
merge (#761), losing the TopbarActionOverflow wiring that the new test
asserts on. Re-applies main's topbar structure (TopbarCluster groups,
TopbarActionOverflow, IntegrationsMenu, MoreToolsMenu, SettingsButton)
on top of our multi-repo additions: repositoryCount + RepositoryBreadcrumb
"+N" chip, gitStatus + isMultiRepo plumbing, and the GitAheadBehindBadges
suppression for multi-repo. GitAheadBehindBadges moved to its own file to
stay under the file-length cap.
2. The chip-style task-create dialog dropped the legacy branch-selector
semantics. Restored:
- Local-executor branch lock: the per-row branch chip is now disabled
when isLocalExecutor and fresh-branch is off. The user's checkout
dictates the branch for local execution; fresh-branch unlocks it.
- Branch override: when locked, the chip shows currentLocalBranch
instead of the value the user picked under a different executor
(so worktree -> local doesn't display a stale "develop" pick).
- Branch refresh: useBranches now exposes a refresh() callback for
id-based sources (calls listRepositoryBranches with refresh=true),
and Pill renders BranchRefreshButton in its popover header when
onRefresh is wired.
- URL-mode branch picker: GitHubUrlSection now renders a real
branch-chip-trigger Pill backed by fs.githubBranches instead of a
read-only span, restoring the "branch selectable in URL mode"
behaviour (URL mode is always remote-clone, so the local-executor
lock does not apply).
E2E spec updated: bulk-rename legacy branch-selector / repository-selector
testids to branch-chip-trigger / repo-chip-trigger.first(). All 13
create-task-branch-selector tests pass locally.
* ci: force workflow re-run
* fix(web): unblock E2E shard 2
Three issues showed up only after the merge with main, which brought back
the E2E shard 2 tests touching git/changes-panel and improve-kandev:
1. Wire the TaskCreateDialog slot props (extraFormSlot, aboveDescriptionSlot,
bottomSlot, descriptionPlaceholder) through to DialogPromptSection. They
were declared on the public API but dropped on the floor before this
change, so Improve Kandev's contributor banner ("@octocat" /
"@kandev-maint") never rendered. Also gate the "or paste a GitHub URL"
toggle on lockedFields.repository so the locked-repo dialog hides it
(matches main's behaviour and the existing test expectation).
2. Revert "commits section starts collapsed" (introduced in
|
||
|
José Almeida
|
9d275d3009 |
refactor: route user terminals by environment (#758)
* refactor: route user terminals by environment * refactor: remove terminal compatibility shims * fix: address terminal PR review feedback * fix: wait for remote shell readiness * fix: require agent mode for session terminals |
||
|
José Almeida
|
45ee2ff48f |
feat: key terminals + dockview layout to TaskEnvironment (#755)
* feat(backend): key user shells by TaskEnvironmentID Sessions in the same task share a TaskEnvironment. Re-key the user shell runner so terminals are scoped per env, not per session — switching between sessions of the same task now sees the same shell list. - Add TaskEnvironmentID to AgentExecution / LaunchRequest / ExecutorCreateRequest / executor.LaunchAgentRequest, propagated through ToAgentExecution and the orchestrator launch path. - Add Manager.ResolveScopeKey(sessionID) — returns env when execution carries it, falls back to sessionID for legacy paths. - Rename runner param sessionID -> scopeID in interactive_shells.go; map keys are now scopeID:terminalID. - Shell handlers + WS terminal handler resolve sid -> scopeID via ResolveScopeKey before calling the runner. * feat(web): key dockview layout + portals to TaskEnvironmentID Switching between sessions of the same task no longer rebuilds the dockview layout — terminals and panels persist because layouts are env-scoped, not session-scoped. The bottom terminal also reuses a stable sessionId across same-env switches so it doesn't reconnect to a different shell. - Rename layout persistence: setSessionLayout/getSessionLayout/*SessionMaximizeState -> setEnvLayout/getEnvLayout/*EnvMaximizeState (kandev.dockview.env-layout. prefix). - Rename dockview-session-switch.ts -> dockview-env-switch.ts; performSessionSwitch -> performEnvSwitch with oldEnvId/newEnvId/activeSessionId. - dockview-store.ts: currentLayoutSessionId -> currentLayoutEnvId; switchSessionLayout -> switchEnvLayout(oldEnvId, newEnvId, activeSessionId). Same-env switches no-op. Drop _skipLayoutSwitchForSession + consumeSkipFlag — env-keyed action handles it structurally. - panel-portal-manager: PortalEntry.envId; releaseBySession -> releaseByEnv. ENV_SCOPED_COMPONENTS in dockview-desktop-layout (renamed from SESSION_SCOPED). - useEnvSwitchCleanup replaces useSessionSwitchCleanup; tracks env changes only. - All performLayoutSwitch callers (sidebar, dropdown, header, dialog) resolve sid -> envId via environmentIdBySessionId before switching. - bottom-terminal-panel: drop sessionId prop, use useEnvironmentSessionId(). - cleanupTaskStorage now takes envIds[] alongside sessionIds[] for env-scoped layout/maximize cleanup. * test: add coverage for env-keyed terminals + layout Playwright e2e (terminal-env-keyed.spec.ts) — switching between sessions of the same task keeps terminal scrollback intact and asserts both sessions share one task_environment_id. Update the comment in sessionless-task-switch.spec.ts to reference performEnvSwitch. * fix: address env layout PR feedback * test: fix flaky handshake auth check * fix: address env scope review findings |
||
|
Carlos Florêncio
|
50b3543bf1 | feat: improve session restoration for complete/failed/cancelled (#302) |