62919efbdce110503dc26efd76b00a6004f56a8d
174 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Clément Fiere
|
3d7b2f32a7 | fix: resume an unarchived task's archive-cancelled and multi-repo sessions (#1905) | ||
|
Carlos Florêncio
|
73bf0fb028 | fix: improve session failure recovery UX (#1866) | ||
|
Clément Fiere
|
7a044b7e02 | fix(task): dedupe repository listing and close local-path create race (#1897) | ||
|
Carlos Florêncio
|
d475cdf597 | fix: scope Office agent tools and task mutations (#1867) | ||
|
Carlos Florêncio
|
edee5a03cf | fix: scope PR branch failure guidance (#1873) | ||
|
Carlos Florêncio
|
c041dbee0e | fix(orchestrator): separate office task session ownership (#1893) | ||
|
Clément Fiere
|
26c38b02e1 | fix(backend): publish session state_changed when archiving cancels sessions (#1891) | ||
|
João Salavisa
|
0f277457e9 |
fix(executor): re-clone provider repos when local path is missing or not a git repo (#1876)
* fix(executor): re-clone provider repos when local path is missing or not a git repo Previously the re-clone guard only fired when local_path was empty, so a set-but-invalid path (e.g. deleted checkout, or relocated by the provider clone-path/identity change) was fed straight to the worktree preparer, which hard-failed with "repository is not a git repository" instead of recovering. Two-part fix: - resolveTaskRepoInfo now also re-clones when local_path exists but isn't a valid git checkout (new isLocalGitRepo helper), self-healing on next launch. - validateWorktreeRequest now fails the "Validate repository" step with an honest error naming the offending path when it truly isn't a git repo, instead of passing and cascading into a misleading "sync interrupted" failure downstream. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(executor): gate stale-path reclone to provider repos and cover resume + multi-repo Restrict the stale-local-path re-clone to genuinely provider-backed repos (SourceType != "local") so a local checkout that's temporarily missing is never silently overwritten. Centralize the re-clone guard into a shared ensureRepoLocalPath helper and call it from the single-repo resume path (applyResumeRepoConfig) so resume self-heals like a fresh launch. Apply the same non-git-path validation used by the single-repo prepare path to the multi-repo prepareOneRepo path so a stale secondary repo fails fast with a clear message instead of surfacing worktree.Manager's ErrRepoNotGit. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
João Salavisa
|
78cae96bb1 |
feat(plugins): host-side conversation reads + utility-agent invoke (#1852)
* feat(plugins): add capability-gated Host reader for conversation content Plugins can now read historical user/agent message content over the Host data API, gated by a new `api_read:messages` capability (ADR 0047). This unblocks "summarize yesterday"-style plugins that the live `message.added` bus event alone cannot serve. - proto: `ListMessages` RPC + `Message`/`MessageFilter` on `service Host`. - SDK: `Host.Messages() MessageReader`, Go-native `Message`/`MessageFilter`. - host: `api_read:messages` accessor + denied reader; content sanitized via `sysprompt.StripSystemContent` (no raw system prompts); RFC3339 `since`/ `until` → `InvalidArgument` on bad input. - data: new `ListMessagesForPlugin` filtered query (session/task ids, type, created_at range) through the task service, never the DB file. - tests: in-process + wire capability gating, content stripping, filter/time passthrough, pagination, and the SQLite query. - docs: ADR 0047, spec, plugins-manifest, plugins-authoring. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * feat(plugins): add Host.InvokeUtilityAgent for settings-selectable utility agent Plugins can now delegate a one-shot LLM step to an operator-configured agent, gated by a new `agent_invoke` capability (ADR 0048), so a plugin needs no provider API key of its own. - setting: new `utility_agent_profile_id` user setting (Settings > System > Utility Agent), a profile dropdown cloned from the existing utility-agent path; selectable in the UI. - capability: boolean `agent_invoke`, enforced like `state`/`secrets`. - proto/SDK: `InvokeUtilityAgent(prompt) -> text` RPC and `Host.InvokeUtilityAgent(ctx, prompt)`. - backend: reuses the sessionless host-utility inference tier (ADR 0002) via a thin adapter — no agent loop, no task/session/workspace; resolves the configured profile to (agent type, model). Unconfigured / deleted profile -> gRPC FailedPrecondition. - tests: capability gating, completion path (asserts the configured profile is used and text returned), no-utility-agent and stale-profile error paths, SDK/wire round-trips, and the settings apply/trim behavior. - docs: ADR 0048, spec, plugins-manifest, plugins-authoring. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> * fix(plugins): resolve utility-agent deps live and bound message filter size Address CI + review feedback on the host plugin capabilities: - docs: register the new /settings/system/utility-agent route in docs/public/coverage.json (fixes the "Validate public docs" CI failure). - utility agent (ADR 0048): hostUtilityMgr is wired late in boot — after StartActivePlugins has already spawned boot-active plugins — so snapshotting the utility deps in hostForPlugin stranded those hosts with nil deps and made InvokeUtilityAgent return Unimplemented for their lifetime. Read the deps live from the Service (mutex-guarded) at call time instead; add a regression test for late wiring reaching an already-spawned host. - messages (ADR 0047): cap the combined session/task/type filter values at 400 so an oversized filter fails fast with InvalidArgument instead of hitting SQLite's host-parameter limit at query execution; add a test. Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com> --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Opus 4.8 (1M context) <noreply@anthropic.com> |
||
|
Carlos Florêncio
|
7fd99c3f33 | feat: complete GitLab integration parity (#1832) | ||
|
Carlos Florêncio
|
be56eff1a2 | fix: reset office session state when execution profile changes (#1846) | ||
|
Carlos Florêncio
|
c2a678b023 | feat: add Azure DevOps integration (#1778) | ||
|
José Almeida
|
3479fb601e |
fix(web): refresh walkthrough ranges on Monaco model changes (#1822)
* fix(web): refresh walkthrough ranges on Monaco model changes * fix(web): avoid recentering walkthrough on line edits * test(backend): isolate executor session snapshots * test(backend): deep-copy executor session snapshots |
||
|
José Almeida
|
f7f1d10996 |
feat: add parent-controlled task stopping via MCP (#1803)
* feat: add parent-controlled task stopping via MCP * fix: harden parent task stop lifecycle * fix: preserve rejected task rollback state |
||
|
Carlos Florêncio
|
4fdd679269 | fix: attribute model configuration to turns (#1784) | ||
|
Carlos Florêncio
|
21f811d5ec | feat: add idle storage maintenance (#1699) | ||
|
Clément Fiere
|
69972b4f79 | fix: freeze archived task state against late REVIEW writes (#1706) | ||
|
Carlos Florêncio
|
16da501fc4 | feat(office): route agents through execution profiles (#1725) | ||
|
Carlos Florêncio
|
30373ea40c | fix: promote commandless workspace executions (#1692) | ||
|
Carlos Florêncio
|
ff2647bf13 | feat: add configurable branch names (#1615) | ||
|
Carl Sue
|
9722a39639 |
fix(ssh-executor): forward agent creds, fix terminal host config, restore linux/arm64 (#1559)
Co-authored-by: Carlos Florencio <carlosmflorencio@gmail.com> |
||
|
point-source
|
e1cf99f821 |
fix(executors): truthful executor rows, startup reconciliation, resume-safe cleanup (#1597) (#1608)
Co-authored-by: Carlos Florencio <carlosmflorencio@gmail.com> |
||
|
Carlos Florêncio
|
c18a13c361 | feat(tasks): adopt Office-style /tasks list UX (#1593) | ||
|
Carlos Florêncio
|
85950a4b69 | fix: persist live executor runtime state (#1585) (#1587) | ||
|
Carlos Florêncio
|
657b92eb69 |
fix: restore workspace deletion from settings (#1547)
* fix: restore workspace deletion from settings * fix: validate workspace delete in service * fix: clarify workspace delete errors * fix: address workspace delete review feedback * fix: guard confirmed workspace delete before cascade * fix: simplify workspace delete cascade guard * fix: make confirmed workspace delete atomic * fix: preserve confirmed workspace delete side effects * fix: snapshot confirmed workspace cascade rows * fix: clarify confirmed workspace delete cleanup * fix: preserve office workspace deletion cleanup * fix: preserve workspace delete error mapping * fix: streamline workspace delete cascade * fix: harden workspace delete cleanup * fix: keep workspace delete failure logs * fix: fail workspace delete on missing session inventory --------- Co-authored-by: root <root@kandev.ts.net> |
||
|
Carlos Florêncio
|
e51e0ebf3c |
fix: keep tasks active while sibling sessions run (#1551)
* fix: keep tasks active while sibling sessions run * fix: avoid duplicate task review writes * fix: clear completed sessions before review guard * fix: serialize session launch state * test: cover completed sibling session states * fix: bound completed execution markers * fix: amortize completed execution marker cleanup * fix: fail closed on stale session starts * fix: ignore stale completed execution events * test: cover stale completed tool calls * fix: harden stale session state guards * fix: handle terminal execution races * fix: avoid duplicate terminal complete side effects * fix: harden terminal execution race guards * fix: guard task review reconciliation * fix: handle late terminal complete side effects * fix: align review-state test guards * fix: fail closed on stale review bridges * fix: reduce review reconcile complexity --------- Co-authored-by: root <root@kandev.ts.net> |
||
|
Carlos Florêncio
|
d0a032fa60 | fix: prefer main for worktree base branches (#1532) | ||
|
Carlos Florêncio
|
211e738ec0 | fix: reuse worktrees for same-task handoffs (#1510) | ||
|
Carlos Florêncio
|
aee1846cd5 | feat: remove nextjs production runtime (#1389) | ||
|
Carlos Florêncio
|
d8436dfd8f | feat: improve passthrough composer and session recovery (#1411) | ||
|
Carlos Florêncio
|
8d0493d1a4 | fix: persist session runtime config (#1346) | ||
|
Carlos Florêncio
|
64140ae942 | fix(acpdbg): read claude agent models and modes from configOptions (#1310) | ||
|
Carlos Florêncio
|
3e92d3abc6 | fix: allow office mcp mode for existing tasks (#1315) | ||
|
José Almeida
|
4601dbc2d2 |
feat(tasks): search tasks by PR number in command panel (#1268)
* feat(tasks): search tasks by PR number in command panel Typing a PR number (e.g. 1243 or #1243) in the Cmd+K panel now surfaces the task that PR is associated with, alongside the existing title/description/repo search. The github store gains a workspace-scoped ListTaskIDsByPRNumber lookup over github_task_prs; the task service resolves it through an injected PRTaskResolver interface (github service wired in cmd/kandev) and merges PR matches into search results, deduped and respecting the archived/ephemeral/config filters. Keeping the lookup at the service layer avoids coupling the task repository to the github schema, so existing search queries and tests are untouched. * fix(tasks): scope PR-number search to page 1 and unfiltered queries Address review feedback on PR-number search: - Only augment results on the first page of an unscoped search. Running on every page re-prepended the PR match and truncated a real result off each subsequent page; running under a workflow/repository filter leaked tasks that don't satisfy the filter. - Add idx_github_task_prs_pr_number so the lookup is index-backed instead of a full scan (pr_number is the 3rd column of the existing UNIQUE constraint, unusable as a leading key). - Log instead of silently dropping a task when GetTask fails in the PR-match loop. * test(github): dedup PR-lookup test setup into shared newTestStore Add workspace_id to newTestStore's tasks table and drop the near-identical newTestStoreWithWorkspaces helper, per review feedback. * perf(tasks): batch-fetch PR-matched tasks instead of N+1 GetTask Add a repository GetTasksByIDs and use it in augmentWithPRMatches so PR-number search loads all matched tasks in one query instead of one GetTask per id, addressing the N+1 noted in review. Fetch+filter is extracted into a fetchPRMatchedTasks helper that preserves resolver order and dedup. |
||
|
Carlos Florêncio
|
a8db7478ac | fix(backend): cap gh/git fork concurrency via shared subproc throttles (#1216) | ||
|
João Salavisa
|
fd79d6170f |
feat(tasks): multi-branch tasks — N (repo, branch) pairs per task (#1226)
* feat(tasks): multi-branch tasks — N (repo, branch) pairs per task Extends multi-repo into multi-branch so a single task can hold multiple worktrees on the same repo (one per branch). Sibling worktrees layout at <task>/<repo>/ + <task>/<repo>-<slug>/, dedicated PRWatch per branch, live agentctl tracker rescan + frontend store updates so the UI splits PRs / files / commits per branch without a session restart. MCP add_branch_to_task_kandev tool is shielded to the worktree executor. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(web): unify multi-branch repo label as <repo> · <branch> across panels PR Changes and Commits panels rendered repo labels differently for multi-branch tasks — Commits showed "kandev · feature/x" while PR Changes leaked the raw "kandev-feature-x" agentctl tracker tag. Reformat tracker-tagged repo names via formatRepoLabel using the longest known-repo prefix so kandev-cli-* doesn't collapse to kandev · cli-*. * fix(tasks): address multi-branch PR review — data races, slug collisions, MCP error codes Backend - agentctl process.Manager: add repoTrackersMu RWMutex guarding repoTrackers + workspaceTracker. Reads snapshot under RLock; RescanRepositories builds trackers first, takes Lock for swap/append. Validates newWorkDir via os.Stat before publishing cfg.WorkDir. - worktree.Manager: reject invalid explicit BranchSlug up-front; cache key uses sanitized wt.BranchSlug so read/write paths are symmetric. - worktree.store: narrow isDuplicateColumnError to "duplicate column name". - task service AddBranchToTask: slug-collision guard rejects feat/a vs feat-a. - orchestrator resolvePushRepo: two-pass exact-name match before subdir prefix fallback so "backend" doesn't swallow pushes for "backend-admin". - executor buildRepoSpecs: duplicate repos always get a non-empty BranchSlug (falls back to branch-N when both branch fields sanitize to empty). - MCP handler: classifyAddBranchError maps service errors to NOT_FOUND / CONFLICT / VALIDATION_ERROR; add ErrorCodeConflict constant. - MCP server: extract registerAddBranchToTaskTool, register in task mode only (external mode contract: config tools + create_task_kandev). - workspace_rescan handler: reject malformed JSON with 400 instead of silently rescanning the current root. - branch_materializer: split MaterializeBranch into prepare + finalize helpers to satisfy the 80-line cap. Frontend - existingPrUrl returns undefined when a task has >1 PR so per-repo View PR buttons take over (no silent linking to a sibling). - formatRepoLabel checks exact known-repo match before prefix splitting so "kandev-cli" isn't mislabeled as "kandev · cli". - Repo chip key now includes base_branch so siblings differing only on base render as distinct chips. Docs - multi-branch spec uniqueness wording aligned with the canonical 4-column key (task_id, repository_id, base_branch, checkout_branch). - worktree.CreateRequest.BranchSlug doc describes the sibling layout (<repo>-<slug>) instead of the obsolete nested form. * fix(tasks): scope slug-collision check to repo only + use errors.Is for ErrTaskNotFound - service_branches: drop base_branch from the slug-collision check. Worktree path is (repo, slug); two rows on the same repo cut from different bases still collide on disk. - service_branches: prepareBranchAdd wraps taskrepo.ErrTaskNotFound via fmt.Errorf with %w so classifiers don't have to substring-match the formatted task UUID. - mcp handlers: classifyAddBranchError uses errors.Is(err, ErrTaskNotFound). * fix(agentctl): sanitize rescan work_dir before os.Stat to clear CodeQL path-injection CodeQL flagged the rescan endpoint as a path-injection sink (the HTTP-supplied work_dir flowed straight into os.Stat and downstream scanRepositorySubdirs). Add validateRescanPath which: - requires the input to be a clean absolute path with no ".." segments - rejects anything that isn't equal to or an ancestor of the current cfg.WorkDir — the only legitimate use case is the branch materializer promoting <task>/<repo>/ to <task>/ Defense in depth: agentctl binds to localhost, but any colocated process could otherwise direct it at /etc or the user's home by POSTing /api/v1/workspace/rescan. * fix(agentctl): tighten validateRescanPath, close TOCTOU on existingTrackers, add tests - Drop the strings.Contains(clean, "..") guard. filepath.Clean already resolves traversal; the substring check rejects legitimate names like /home/u/..hidden without adding defense (the ancestor check via filepath.Rel is the real boundary). - Drop the rel == "." branch in the ancestor check — early return for clean == currentClean already covers identity. - Read existingTrackers inside the write-lock section (not under RLock then re-Lock) so two concurrent rescans can't both see 0 trackers and double-bootstrap the multi-repo set. - Add table-driven TestValidateRescanPath covering rejection paths (relative, descendant, sibling, traversal-cleaned, empty input), legitimate ancestor promotion, exact match, no-anchor first-launch, and a /home/u/..hidden dotted-segment case. * fix(agentctl): break taint flow into os.Stat — derive rescan path from cfg, not HTTP body CodeQL's go/path-injection trace still flagged manager_rescan.go after the prior sanitizer because the user-supplied newWorkDir flowed (after validation) into os.Stat and then into cfg.WorkDir → tracker paths → workspace_monitor os.Stat sinks. Replace validateRescanPath with resolveRescanPath: it returns a path DERIVED from currentWorkDir (no-op = currentClean, promotion = filepath.Dir(currentClean)) and uses newPath only for comparison, never as a source for the returned string. os.Stat now receives a path whose provenance is trusted manager config. Functionally the legitimate caller (branch materializer promoting <task>/<repo>/ to <task>/) is unchanged. * test(agentctl): make TestResolveRescanPath windows-portable The Linux Backend Tests job passed but the Backend (windows) job rejected every "absolute" case because filepath.IsAbs("/task/repo") is false on Windows (no volume letter). Build inputs via filepath.Join against absRoot() (filepath.Abs of "/" / "\\") so the same table covers POSIX (`/...`) and Windows (`C:\...`) without per-OS branches. Keep the traversal-after-Clean case POSIX-only since filepath.Clean is the shared primitive and that input form needs a volume to be considered absolute on Windows anyway. * fix(agentctl): serialize RescanRepositories + re-check trackers under write lock Two concurrent RescanRepositories calls could both observe an empty tracker set (between the snapshot read and the bootstrap branch) and both enter transitionToMultiRepoMode, leaking a duplicate bare-root tracker and duplicate per-repo trackers. Same race in appendNewRepoTrackers would double-append the same new child across both callers. Fix: - Add rescanMu sync.Mutex on Manager. Acquired for the full body of RescanRepositories so the snapshot → branch → mutate sequence is serialized. repoTrackersMu still guards individual field reads from unrelated goroutines (subscribe/unsubscribe/poll-mode). - appendNewRepoTrackers re-checks membership inside the write-lock before appending and drops already-present trackers (Stop + detach outside the lock). Defense in depth. - Test: add `dotted segment is legal as promotion` case so the ..hidden-segment promotion path stays exercised. --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
Carlos Florêncio
|
86f756e280 | feat(workflow): add set_session_mode action and preserve mode across reset (#1188) | ||
|
João Salavisa
|
fa4a48d5e7 |
chore: remove orphan helpers, setters, and deprecated wrappers (#1085)
* chore: remove orphan executor tracing file and deprecated ResolveScript wrappers - Delete internal/agentctl/tracing/executor.go (7 TraceExecutor* funcs) - Delete internal/orchestrator/executor/script_template.go (deprecated wrapper) - Delete scriptengine.ResolveScript convenience function Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove orphan setter methods across healthpoll, jira, linear, slack, updates - Delete Poller.SetInterval from integrations/healthpoll (no callers) - Delete Poller.SetIssueTickHook from jira and linear (no callers) - Delete Trigger.SetInterval and Trigger.SetMatchHook from slack (no callers) - Delete Service.SetPollInterval from system/updates (no callers) Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove orphan wrapper functions and accessor method - Delete updates.FetchLatestRelease shim (wraps FetchLatestReleaseFrom, no callers) - Delete usage.NewClaudeUsageClient and NewCodexUsageClient shims (no callers) - Delete database.Service.Path() accessor (no callers) - Update ErrGitHubRateLimited godoc to reference FetchLatestReleaseFrom Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove unwired handleListExecutors MCP handler The sibling profile handlers (list/create/update/delete) are registered via RegisterFunc in handlers.go. handleListExecutors never was — dead flow. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove stale hook-field comments after setter deletion SetIssueTickHook (jira, linear) and SetMatchHook (slack) were removed in the deadcode cleanup. Their struct fields still claimed "tests use this" — no test or caller can set these fields now. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> * chore: remove orphan hook fields and fire methods after setter deletion issueTickHook (jira/linear) and matchHook (slack) are unexported and never set after their public setters were removed; fireIssueTickHook / fireHook were permanent no-ops. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Sonnet 4.6 <noreply@anthropic.com> |
||
|
João Salavisa
|
a627957c5b |
refactor(task/repo): split sqlite/base.go and add session batch loader (#1058)
* refactor(task/repo): split sqlite/base.go (1486 lines) into schema/migrations/queries base.go grew to 1.85x the 800-line lint threshold by mixing the Repository struct, schema initialization, ALTER TABLE migrations, recreate-and-copy table rebuilds, and historical backfills/heals. Split along those seams: - base.go (58 lines) keeps only the Repository struct, NewWithDB, newRepository, Close, DB. - base_schema.go owns the initSchema orchestrator, every init*Schema function, ensure*Indexes, ensureRunnerProjectionTables, and the plan-revision backfill that runs as part of initPlansSchema. - base_migrations.go owns migrate*, recreateTable[Named], runMigrations, the backfillRow type, and every backfill*/heal* function. Verbatim function moves with no semantic changes. - base_queries.go owns sqlLimitClause (still referenced by plan.go, document.go, message.go). To keep golangci-lint (new: true) green after the move: - initSchema's 17 if-return chain becomes a for-each-step loop so cyclomatic complexity drops from 19 to within the 15 limit. - initInfraSchema and initSessionWorktreeSchema hoist their DDL strings into package-level consts (infraSchemaDDL, sessionWorktreeSchemaDDL) so each function body fits the 80-line funlen cap. Step ordering in initSchema is preserved exactly (backfillTaskEnvironments -> backfillTaskEnvironmentRepos -> healTaskEnvironmentWorkspacePaths -> healDuplicateTaskEnvironments -> ensureTaskEnvironmentTaskUniqueIndex -> healSessionTaskEnvironmentIDs) so existing prod DBs continue to migrate correctly. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * feat(task/repo): add BatchGetSessionsByTaskIDs to eliminate task-list N+1 Adds a single repository method that returns every task_session for a list of task IDs in one chunked IN (...) query, grouped by task_id. The workspace task-list endpoint previously needed three batched calls (GetPrimarySessionIDsByTaskIDs + GetSessionCountsByTaskIDs + GetPrimarySessionInfoByTaskIDs); with this loader the handler can derive primary session ID, session count, and per-task session info from a single round trip. - buildInPlaceholders and chunkIDs land in base_queries.go. sqliteMaxHostParams=500 keeps each chunk well below SQLite's compile-time SQLITE_MAX_VARIABLE_NUMBER (999 on older builds, 32766 on newer). - session.go gains BatchGetSessionsByTaskIDs, which reuses taskSessionSelectCols / scanTaskSessions / loadWorktreesBatch so the returned sessions are indistinguishable from ListTaskSessions output (worktrees populated, JSON snapshots decoded). Empty input short-circuits with a non-nil empty map. - SessionRepository interface and Service.BatchGetSessionsForTasks expose the new method to the handler layer. The three existing *ByTaskIDs methods are left in place because service_events.go still uses them for single-task event publishing. - mockRepository implementations updated in two test files so the packages still satisfy the interface. TestBatchGetSessionsByTaskIDs covers the empty-input short-circuit, the multi-task (3 x 2) case (primary derivation + no cross-task bleed), and the asked-for-but-missing case (absent from result map). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * perf(task/handlers): use BatchGetSessionsForTasks in task-list endpoint buildTaskDTOsWithSessionInfo previously issued three batched queries per request (GetPrimarySessionIDsForTasks + GetSessionCountsForTasks + GetPrimarySessionInfoForTasks). Each was already chunked by task_id, but together they were three round trips for data that can be derived from one. Collapse to a single BatchGetSessionsForTasks call and derive primary session ID, count, and per-task primary info in memory. The JSON response shape is unchanged: dto.FromTaskWithSessionInfo still receives the same pointer-typed arguments, primarySessionID stays nil when no primary exists, and sessionCount stays nil for tasks with zero sessions (matches the existing pointer-when-present contract that the frontend store hydration depends on). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(task/handlers): restore JOIN-derived executor type/name in task-list response buildTaskDTOsWithSessionInfo regressed when it stopped calling GetPrimarySessionInfoForTasks: extractSessionInfo reads ExecutorSnapshot["executor_type"] and ExecutorSnapshot["executor_name"], but those keys exist only on the synthetic snapshot built by the GetPrimarySessionInfoByTaskIDs LEFT JOIN to executors. The persisted ExecutorSnapshot JSON uses different keys (e.g. "type" — see share/builder.go:96), so BatchGetSessionsForTasks alone always yielded empty executor_type / executor_name fields in the task-list response, breaking the frontend task card's executor badge. Fix (caught in code review): - Handler now calls both BatchGetSessionsForTasks (for primary session ID and session count) and GetPrimarySessionInfoForTasks (for the JOIN-derived executor type/name and other session info). Two queries instead of the original three; correctness preserved. - New TestGetPrimarySessionInfoByTaskIDs_PopulatesExecutorJoinFields seeds an executor + primary session, then asserts the JOIN populates ExecutorSnapshot["executor_type"] / ["executor_name"] on the returned session. Locks in the contract the handler depends on so a future refactor that drops the JOIN fails loudly instead of silently emitting empty fields. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(task/repo): chunkIDs returns empty slice for empty input chunkIDs previously returned [][]string{nil} for an empty/nil input (a single chunk whose value is nil). The only current caller (BatchGetSessionsByTaskIDs) short-circuits empty input before reaching chunkIDs, so the bug stayed dormant — but any new caller that forgot the short-circuit would feed a nil chunk to buildInPlaceholders (which returns "" for nil), produce a `... WHERE task_id IN () ORDER BY ...` query, and hit a SQL syntax error at runtime. Make the helper safe by construction: an empty input returns nil (empty outer slice), so `range chunkIDs(empty, n)` iterates zero times. Add base_queries_test.go covering: - Empty/nil input → no chunks (locks the safety contract). - Single-pass input fits in one chunk. - Over-threshold input splits into correctly-sized, in-order chunks. - buildInPlaceholders normal + empty-input cases. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(task/repo): propagate non-ErrNoRows errors in backfillSingleTask executor lookup `backfillSingleTask` looked up `executors.type` for the legacy executor referenced by a session and defaulted to `"local_pc"` on any error. That silently masked driver failures, schema mismatches, and corruption — every backfilled task_environment would get the wrong executor_type without surfacing the underlying problem. Narrow the default to the legitimate case: only `sql.ErrNoRows` (the executor row was actually deleted, e.g. legacy session whose executor is gone) falls back to `"local_pc"`. Any other scan error now aborts the migration with a wrapped error so operators see the real cause. Adds TestBackfillSingleTask_DefaultsExecutorTypeOnMissingRow which seeds a session referencing a non-existent executor id and asserts the backfill still completes with `executor_type = local_pc` — locks in the legitimate-fallback path. Addresses PR #1058 review feedback from cubic & claude. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(task/repo): chunk ListWorktreesBySessionIDs to honor SQLite var limit ListWorktreesBySessionIDs built its IN-clause from every input session ID in one shot. BatchGetSessionsByTaskIDs chunks task IDs at 500 to stay below SQLITE_MAX_VARIABLE_NUMBER (999 on older builds), but its loadWorktreesBatch step then handed all sessions in that 500-task chunk to ListWorktreesBySessionIDs un-chunked — so at modest workloads (500 tasks × ≥2 sessions each = 1000 placeholders) the query fails with SQLITE_RANGE and bubbles up as a 404 on the task-list endpoint. ListWorktreesBySessionIDs now applies the same chunkIDs / 500 cap that BatchGet uses. Body extracted to appendWorktreesForSessionChunk so the public method stays under the 80-line funlen cap. New TestListWorktreesBySessionIDs_ChunksOverPlaceholderLimit feeds the method 1001 non-existent session IDs and asserts it returns cleanly — without chunking, this fails with SQLITE_RANGE on a default-built SQLite. Also splits TestBatchGetSessionsByTaskIDs (was 98 lines) into focused subtests + a shared seedBatchSessions helper, satisfying the test-size convention. The three sub-scenarios (empty input, multi-task grouping, missing-task absence) now fail in isolation. Addresses PR #1058 review feedback from greptile (P1) and claude (suggestion). Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(task/repo): port repositories.copy_files migration to split files Rebased onto main; main added copy_files to runMigrations() and initTaskSchema() in base.go while our branch had split those into base_migrations.go and base_schema.go. Cherry-pick both additions into the correct split files so the schema is consistent. Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com> --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
Carlos Florêncio
|
21db57bdfd | fix(orchestrator): repair worktree state and prompt persistence on resume (#1121) | ||
|
Carlos Florêncio
|
905b9f9727 | fix: improve UX for subtasks with repo setup scripts (#1105) | ||
|
João Salavisa
|
dcfec0d23c |
refactor(backend): classify errors via sentinels instead of substring matches (#1057)
* refactor(backend): classify errors via sentinels instead of substring matches
Introduce package-local sentinel errors in the github, task repo, agent
lifecycle, and office/skills packages. Producers wrap with fmt.Errorf("%w: ...")
so callers can classify via errors.Is/errors.As instead of brittle
strings.Contains(err.Error(), ...) checks that break on library upgrades.
Sentinels added (or relocated to errors.go):
- github: ErrInvalidToken (new); ErrInvalidPRURL, ErrTaskNotFound, ErrSelfApprove
moved from service.go.
- task/repository/sqlite: ErrTaskNotFound, ErrOfficeSessionRaceConflict.
- lifecycle: ErrAgentAlreadyRunning, ErrAgentReported.
- office/skills: ErrSkillNotFound, ErrSkillFileNotFound.
Consumers updated to errors.Is/errors.As across orchestrator, task/handlers,
github, and office/skills. AssociateExistingPRByURL switches %v -> %w so the
inner parsePRURL error stays in the chain. process_handlers now uses
errors.Is(err, syscall.ECONNREFUSED) and lifecycle.ErrNoExecutionForSession
plus a small isTimeoutError helper backed by errors.As.
A new taskDeleterAdapter in cmd/kandev/turn_adapters.go translates
taskrepo.ErrTaskNotFound to github.ErrTaskNotFound at the wiring boundary,
avoiding a layering violation between the github and task packages.
The one remaining substring check, in CreateTaskSession, is encapsulated
inside the repo and converts the SQLite UNIQUE-violation message into the
typed ErrOfficeSessionRaceConflict sentinel so callers never see the driver
string.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(backend): add TestErrorsAreClassifiable for refactored packages
Pin the new sentinel-based contract for each refactored package. Each test
exercises the producer paths and asserts errors.Is reaches the sentinel
through the wrap chain, and (where applicable) confirms untyped lookalike
strings no longer classify.
- github: isTaskNotFound, AssociateExistingPRByURL/ErrInvalidPRURL,
ConfigureToken/ErrInvalidToken (using a noop secret manager).
- task/repository/sqlite: GetTask, DeleteTask, UpdateTaskState wrap
ErrTaskNotFound.
- task/handlers: isNotFound + isAgentReportedError follow the typed chain.
- orchestrator: each isXError classifies exact + wrapped sentinels, rejects
untyped lookalikes.
- office/skills: readUserHomeSkillInventoryFile wraps ErrSkillFileNotFound;
ErrSkillNotFound survives fmt.Errorf("%w", ...).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(github): drop network-hitting subtest from errors_test
The "ConfigureToken wraps ErrInvalidToken when validation fails" subtest
constructed a real PATClient and called GetAuthenticatedUser, which makes
a live HTTP request to api.github.com. That's flaky in CI / offline dev
and violates the unit-test boundary (caught in review).
Replace with a sentinel-survives-wrap-pattern check that locks in the
exact %w/%w shape used by ConfigureToken, plus an assertion that the
inner cause stays reachable through errors.Is. The full ConfigureToken
flow stays covered by service_token_test.go and integration tests.
Remove the now-unused noopSecretManager stub type.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(task): restore "timed out" UX for plain-fmt.Errorf timeout producers
The original createPromptErrorMessage rendered the friendly "Request timed
out…" hint via strings.Contains(err.Error(), "timeout"). The refactor
replaced it with errors.Is(context.DeadlineExceeded) + a net.Error
Timeout() helper — strictly typed. But several upstream producers along
the prompt path (service.WaitForSessionReady, agent-stream connect waits
in lifecycle/session.go and manager_interaction.go, agentctl health waits
in agentctl/client.go and launcher.go, the orchestrator's own
waitForSessionReady) return plain fmt.Errorf("timeout …") with no typed
Timeout() method, so the typed check missed them and the user saw the
generic "Failed to send message to agent" instead.
Add a substring fallback inside isTimeoutError as a UX safety net while
keeping the primary typed paths intact. Lock the contract with table
tests covering all three classes (net.Error timeout, plain string,
context.DeadlineExceeded) so any future trim of the fallback breaks
loudly. Migrating each upstream producer to a typed sentinel is tracked
as out-of-scope follow-up.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(backend): tighten classification tests to exercise typed-sentinel contracts
Addresses bot-review feedback on PR #1057:
- task/handlers/errors_test.go: cover all four not-found sentinels
(taskrepo.ErrTaskNotFound, service.ErrDocumentNotFound,
service.ErrTaskPlanNotFound, service.ErrRevisionNotFound) in
TestErrorsAreClassifiable via a table-driven loop, instead of only
one. Drop the spurious Deadline() *time.Time method on timeoutNetErr
— it isn't part of net.Error and the existing `var _ net.Error =
timeoutNetErr{}` line already pins the interface.
- orchestrator/scheduler/scheduler_test.go: testTaskRepository was
still returning the local scheduler.ErrTaskNotFound, which doesn't
satisfy the production processTasks check (now errors.Is on
taskrepo.ErrTaskNotFound). Mirror the real sqlite repo's wrap so the
mock and prod paths agree. The local scheduler.ErrTaskNotFound is
truly dead after that, so drop it from scheduler.go.
- office/skills: the wrap-pattern subtest in errors_test.go was only
testing fmt.Errorf, not production code. Move the contract assertion
to service_test.go (external skills_test package) where it drives
the real GetSkillFromConfig lookup path against an empty in-memory
repository.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(backend): drop redundant context.DeadlineExceeded check and fix doc grammar
Addresses bot-review feedback on PR #1057:
- task/handlers/message_handlers.go::createPromptErrorMessage: the
explicit errors.Is(promptErr, context.DeadlineExceeded) is redundant
with isTimeoutError, which already matches via errors.As against
Timeout() — context.DeadlineExceeded implements Timeout()==true.
Inline comment documents the consolidation.
- github/errors.go: fix grammar in the ErrTaskNotFound doc comment
("is the sentinel cleanup paths check for to distinguish" →
"is the sentinel that cleanup paths check to distinguish").
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
|
||
|
Carlos Florêncio
|
f1dbad1dbd | feat(cli-mode): auto-inject task prompt + dynamic submit sequence + passthrough UX fixes (#923) | ||
|
José Almeida
|
777dfdb15b |
feat(ssh): add SSH executor (#927)
* feat(backend): add SSH executor runtime
Run agents on any Linux box reachable over SSH: own VPS, homelab, EC2,
shared dev box. One SSH connection per (host, user, identity) shared
across all sessions on that host; each session gets its own remote
agentctl process, remote port, and SSH-tunneled local port. Mirrors the
local ~/.kandev/tasks/<task-dir>/<repo>/ layout on the remote so
multi-session tasks share a worktree and per-session runtime state lives
under the task dir.
Implements ExecutorBackend + RemoteSessionResumer + RemoteStatusProvider
+ Closeable. Host-key trust is explicit: the test endpoint observes a
fingerprint without pinning; the user trusts it in settings; subsequent
connects reject any mismatch. Auth via ssh-agent or IdentityFile only
(passphrase-protected keys must be loaded into ssh-agent). Parses
~/.ssh/config for HostName/Port/User/IdentityFile/ProxyJump inheritance.
agentctl is content-hash-cached on the remote (~/.kandev/bin/agentctl
plus a .sha256 sidecar) and uploaded only when local and remote differ.
Linux/amd64 only in v1, matching Docker's current state; arm64 is
called out as a cross-cutting follow-up.
See docs/specs/ssh-executor/spec.md.
* feat(backend): add SSH test + sessions HTTP/WS endpoints
POST /api/v1/ssh/test runs the connection probe used by the settings UI:
dials the host with a permissive host-key callback that records (but
does not pin) the fingerprint, probes uname/arch/git, and reports
whether agentctl is already cached on the remote. The UI gates the
"Trust this host" checkbox on success + fingerprint, and Save persists
the trusted fingerprint into the executor config.
GET /api/v1/ssh/executors/:id/sessions returns the active SSH-runtime
sessions backing the "Active sessions" card on the executor settings
page, mirroring the SpritesInstancesCard / DockerContainersCard shape
(task, session, user@host, remote port, local forward port, uptime).
Both routes also exposed over WS via ssh.test / ssh.sessions.list.
* feat(web): add SSH executor settings UI
SSHConnectionCard: connection form (name, host_alias / host / port /
user, identity source = ssh-agent | file with optional file path,
optional ProxyJump) with a Test Connection button that runs the backend
probe, surfaces the observed host fingerprint, and only enables Save
when the user explicitly ticks "Trust this host". Editing the host /
port / user / identity fields resets both the test result and the trust
checkbox. On save, if the executor already has running sessions, a
confirm modal warns that those keep going on the old host and only new
sessions will use the new config.
SSHSessionsCard: 90s-polled table of active sessions for the executor,
mirroring SpritesInstancesCard / DockerContainersCard. Columns: task,
session, user@host, remote agentctl port, local forward port, uptime,
status badge. Backed by GET /api/v1/ssh/executors/:id/sessions.
Also registers the ssh entry in executor-icons.ts (label "SSH",
IconTerminal2) so it surfaces consistently in the rest of the settings
chrome.
* docs: add SSH executor v1 spec
Captures the design behind the new SSH executor: why ("run on a Linux
box I already own" between local and Sprites), the remote layout that
mirrors local ~/.kandev/tasks/, per-session agentctl + forward over a
shared per-host SSH connection, explicit-trust host-key flow, ~/.ssh/config
inheritance, amd64 + agentctl content-hash cache, recovery via persisted
ExecutorRunning metadata, settings UI (Connection + Sessions cards), and
the edit-with-live-sessions warning UX. Out-of-scope items (arm64,
macOS, password auth, chained ProxyJump, working-tree push, etc.) are
called out explicitly with the follow-ups they unblock.
* chore(e2e): rename docker project to containers + add e2e README
The Docker e2e Playwright project was the natural home for any test
that needs a real Docker daemon on the host — but its name implied it
was only about the Docker executor. SSH e2e tests (incoming in
follow-up commits) belong here too, since they use a Dockerised sshd
container as the SSH executor's remote target.
- Rename project: docker -> containers, widen testMatch to also include
tests/ssh/*.spec.ts.
- Rename env flag: KANDEV_E2E_DOCKER -> KANDEV_E2E_CONTAINERS, with the
old name kept as a deprecated alias for one release so local scripts
and CI configs don't break overnight.
- Rename CI job: e2e-docker -> e2e-containers, switch its blob report
name and the merge-job dependency.
- Add apps/web/e2e/README.md explaining the project layout, what the
containers project covers (Docker executor + SSH executor), why it
was renamed, and how to run it locally.
- Add docs/specs/ssh-executor/e2e-plan.md tracking the SSH e2e
coverage we'll implement on top of this rename (real sshd container,
no mocks, 17 spec files covering ~75 cases). Includes a "Deferred"
section that flags arm64 as something to revisit when
agentctl-linux-arm64 lands in the build pipeline.
* feat(web): add data-testid attributes to SSH settings UI
Sweep stable test ids across the SSH connection and sessions cards so
the incoming Playwright suite can hold steady against refactors. Splits
the formerly monolithic ssh-settings.tsx into three files to stay
within the per-file/per-function size limits:
- ssh-connection-card.tsx (form + test-then-trust flow)
- ssh-sessions-card.tsx (active-sessions table)
- ssh-settings.tsx (barrel re-export so existing imports keep working)
Test ids cover: card roots, every input, identity-source select +
options, test/save buttons, connection badge (with data-status), error
text, test-result panel (with data-success), per-step rows (with
data-success), observed/pinned fingerprint, fingerprint-change
warning, trust checkbox, sessions table + per-row cells, empty state,
refresh button, session status badge.
* feat(e2e): scaffold the SSH executor test harness
Lands the building blocks the SSH specs will compose on top of. Every
piece talks to a real sshd container — no mocks at any layer.
- fixtures/ssh-image.ts: builds kandev-sshd:e2e once per machine (Alpine
+ openssh-server + openssh-sftp-server + git + bash + sudo +
iproute2 + iptables, pre-bakes mock-agent at /usr/local/bin/mock-agent,
generates a fresh host key on entrypoint, reads the worker public key
out of a bind-mounted /authorized_keys). The agentctl binary is
deliberately NOT pre-baked so tests exercise the SFTP upload + sha256
cache path the production code uses.
- helpers/ssh.ts: per-worker sshd lifecycle (startSSHServer /
stopSSHServer), keypair generation, host-key fingerprint scanning,
fault injection (regenerateHostKey for host-key-rotation specs,
dropTrafficToPort22 / restoreTraffic for connection-drop tests,
killRemotePid for "agentctl died" recovery), and remote inspection
helpers (readRemoteFile / remotePathExists / listRemoteDir /
countSshdConnections).
- helpers/ssh-bastion.ts: two-container ProxyJump setup. Bastion is on
a private Docker network and has a published port; target is on the
same network with NO host port — any successful connection MUST have
traversed the bastion, which makes the proxy-jump assertion honest.
- fixtures/ssh-test-base.ts: worker-scoped fixture mirroring
docker-test-base. Skips when Docker isn't reachable. Spins up the
sshd container, generates keys, scans the fingerprint, then seeds a
workspace + workflow + bare repo + mock-agent profile + an SSH
executor with the fingerprint already trusted. Specs that need to
exercise the test-then-trust UI gate create their own executor on
top of the same target.
- pages/SSHSettingsPage.ts: Page Object covering the connection form,
test/save buttons, trust checkbox, observed/pinned fingerprint, per
step badges, and the sessions table.
- helpers/api-client.ts: new createSSHExecutor / updateExecutor /
getExecutor / testSSHConnection / listSSHSessions methods plus
matching DTO types.
* test(e2e): add SSH executor Playwright suite (17 specs, ~75 cases)
Every spec drives the real sshd container set up by the ssh-test-base
fixture; no mocks. Specs are grouped by concern (file per group),
mirroring the docker/ directory style. Each one maps 1:1 to a row in
docs/specs/ssh-executor/e2e-plan.md.
UI surface:
- connection-form.spec.ts — field rendering, save/test gating,
identity-source toggle, default port.
- test-result.spec.ts — successful + failed Test Connection paths,
per-step badges, fingerprint surfacing, cached/will-upload copy.
- trust-gate.spec.ts — save disabled until trust ticked, edits reset
result + trust, fingerprint-change warning when pinned != observed.
- sessions-card.spec.ts — empty state, row rendering, manual refresh,
status badges, truncation, polling pickup.
- persistence.spec.ts — fingerprint persists across reload, new form
starts blank, executor list label, partial state doesn't leak.
API contract:
- test-endpoint.spec.ts — POST /api/v1/ssh/test step ordering, invalid
body, host-required, handshake short-circuit, cached/uploaded states.
- sessions-endpoint.spec.ts — GET /api/v1/ssh/executors/:id/sessions
filters to ssh-runtime rows, populates metadata, monotonic uptime.
- executor-crud.spec.ts — type=ssh persists fingerprint, profile
workdir round-trip, edit-with-running-sessions keeps snapshots.
Real-SSH integration:
- launch-task.spec.ts — full smoke: agentctl upload + sha256 cache hit
on second launch, task/session dir layout, stop cleans session dir.
- recovery.spec.ts — backend restart reconnects, dead pid surfaces
failure, persisted metadata keys present.
- auth-methods.spec.ts — key + valid, missing key, passphrase-protected
rejection, agent without SSH_AUTH_SOCK, wrong-key auth failure.
- concurrency.spec.ts — two sessions share task dir distinct ports, two
tasks distinct dirs, traffic drop + restore exercises eviction +
reconnect.
- hostkey-rotation.spec.ts — regenerate host key surfaces new
fingerprint, stale pinned fingerprint blocks launch verbatim, re-trust
restores function.
- config-inheritance.spec.ts — ~/.ssh/config HostName / Port /
IdentityFile / ProxyJump inheritance with form-overrides-config rules.
- workdir-per-profile.spec.ts — per-profile ssh_workdir_root routes to
separate remote workdir trees; default falls back to ~/.kandev.
- proxy-jump.spec.ts — 2-container bastion topology asserts target is
unreachable directly, reachable via ProxyJump, chained ProxyJump fails.
- error-surfacing.spec.ts — TCP refused, auth failed, bastion unreachable
surface verbatim; backend 400 stays a 400 not a synthesised failure.
Also adds an AGENTS.md (CLAUDE.md symlink) line pointing at the
e2e/README.md so future agents discover the containers project +
KANDEV_E2E_CONTAINERS env var without grepping playwright.config.ts.
* fix(e2e): unlock sshd account, derive fingerprint from kandev probe
Three bugs surfaced by actually running the SSH e2e suite
(KANDEV_E2E_CONTAINERS=1 against the containers project):
1. Alpine's `adduser -D kandev` leaves the account password-locked
(`!` in /etc/shadow). sshd then refuses every auth method for that
user — including pubkey — with "User kandev not allowed because
account is locked". Fix: `usermod -p '*' kandev` in the Dockerfile
so the account is open for key-based login but still has no valid
password. Also adds the `shadow` apk package for `usermod`.
2. ssh-keyscan reports the ed25519 host fingerprint, but Go's ssh
client may negotiate a different host key type when sshd offers
multiple — meaning the fingerprint the fixture pre-scanned didn't
match the one kandev observed at handshake time. Fix: the fixture
now hits /api/v1/ssh/test with a permissive callback right after
the container is up and uses that fingerprint as the pinned value.
Same code path real users hit; eliminates the negotiation skew by
construction.
3. ssh.ts had a CPU-spin sleep helper and an nc-dependent TCP probe,
both fragile. Replaced with a proper sleep subprocess and a bash
/dev/tcp probe, plus retry-with-stderr on the fingerprint scan so
failures are diagnosable.
Also tightens test-endpoint.spec.ts F4: the test was using
identity_source=agent to "fail fast", but that fails inside
buildAuthMethods before the handshake step ever runs. Switched to
identity_source=file against a refused port so the test exercises
the actual TCP+handshake failure path.
After these fixes 4/6 test-endpoint cases pass against a real sshd.
* fix(ssh): make the end-to-end launch path actually work
A pass of issues uncovered by running the SSH e2e suite locally
(KANDEV_E2E_CONTAINERS=1 against the real sshd container). After this
commit all 15 non-launch SSH e2e tests pass (UI form validation,
test-connection contract, auth-methods, error-surfacing, sessions-card
empty state) and the launch path runs through prepare -> upload ->
agentctl -> instance -> forward, with WebSocket streams sometimes
disconnecting partway through (tracked below for follow-up).
Image changes (apps/web/e2e/fixtures/ssh-image.ts):
- Install curl so the SSH executor can POST to the in-container
agentctl control server for instance creation.
- Install gcompat + libstdc++ so the dynamically-linked glibc
agentctl binary can exec on musl-libc Alpine. Without it the
kernel returns ENOENT for /lib64/ld-linux-x86-64.so.2.
- Install shadow + 'usermod -p *' kandev so sshd doesn't refuse
pubkey auth for the otherwise-locked user.
- Drop in 'AllowTcpForwarding yes' and 'MaxSessions 100' via
/etc/ssh/sshd_config.d/. Alpine's defaults are 'no' and 10, both
of which crater the SSH executor's port-forward path.
- chown /home/kandev/.kandev to kandev on entrypoint so a host
bind-mount of that path (used in this commit for log persistence)
doesn't make agentctl unable to write its log file.
Image helper (apps/web/e2e/helpers/ssh.ts):
- Bind-mount the host mock-agent-linux-amd64 into the container at
the same absolute path. kandev's orchestrator builds the agent
command from KANDEV_MOCK_AGENT_LINUX_BINARY (a host path), so the
remote needs the binary at that exact path; bake-into-image isn't
enough because the absolute host path is what kandev sends.
- Bind-mount /home/kandev/.kandev so per-session agentctl logs
survive --rm teardown and the test runner can inspect them on
failure.
- Replace the broken CPU-spin sleep helper with a real sleep
subprocess and a /dev/tcp TCP-open probe so timing-dependent
helpers stop racing the container start.
- Retry the host fingerprint scan with stderr capture; the first
scan can race the sshd accept loop on Alpine.
Backend SSH executor (apps/backend/internal/agent/lifecycle):
- executor_ssh_operations.go startRemoteAgentctl: agentctl does not
accept --port-file or --pid-file flags (it reads AGENTCTL_PORT
and writes its own pid). Rewrite the launch wrapper to inject
AGENTCTL_PORT via env, capture $! as the pid, and tail the
on-remote agentctl.log for 'HTTP server bound successfully'
instead of waiting on imaginary side-files.
- executor_ssh_operations.go createRemoteAgentInstance: new helper
that POSTs /api/v1/instances on the in-container control server
via SSH-exec'd curl, returning the per-instance port the executor
should forward to. Mirrors what executor_sprites_operations.go
does inside its sprite. Without this step the agent stream
returns 'configure request failed with status 404' because the
SSH executor was talking to the control server, not the
per-session sub-server.
- executor_ssh.go startAndForwardAgentctl: chains the new
create-instance step in between agentctl launch and port-forward,
and forwards the *instance* port (not the control port).
- executor_ssh.go: drop the per-host SSH connection pool (it was
introducing a subtle aliasing issue between
CreateInstance/StopInstance/GetRemoteStatus that made the SSH
client unreliable across same-host sessions). Each session now
holds its own ssh.Client directly on sshSessionState and
ResumeRemoteInstance dials a fresh client too.
- executor_ssh_operations.go SSHPortForwarder: serialize the
client.Dial calls with a per-forwarder mutex. golang.org/x/crypto/
ssh.Client.Dial is documented as concurrency-safe but in practice
parallel opens from the kandev stream-manager occasionally
produce io.EOF as if the channel-open response was never
received.
Test fix (apps/web/e2e/tests/ssh/error-surfacing.spec.ts):
- Q1 ('TCP refused') was using identity_source='agent' with no
SSH_AUTH_SOCK in the backend env, so it failed at
buildAuthMethods before reaching the TCP-refused path. Switch to
identity_source='file' with the seed key so the test exercises
the failure it claims to.
Known remaining issue (to investigate next): the launch path now
reaches 'agent process started' + 'ACP initialize response
received' when run in isolation, but the WebSocket updates stream
sometimes disconnects with 1006 abnormal closure shortly after. A
standalone Go reproduction of concurrent direct-tcpip channels
against the same image works without issue, so the trigger is
something specific to the kandev backend's stream-manager + my
forwarder interaction. Tracked for the next iteration.
* fix(ssh): half-close forwarded SSH channels to avoid premature WS abnormal-close
The SSH executor's port-forwarder previously called the full Close() as soon
as either direction of the bidirectional copy finished. Under HTTP-Upgrade
WebSocket traffic this meant: when the WS server flushed its final frame and
shut down the write side, our local->remote io.Copy returned EOF, we closed
the entire SSH channel, the remote->local copy aborted mid-frame, and the
backend's WS reader observed close 1006 (unexpected EOF) instead of a clean
close frame.
Switch to a half-close pattern: each direction CloseWrite()s its destination
when its source EOFs, letting the other half drain the remaining frames. The
final Close happens after both copies return.
The "ssh forwarder dial remote failed: EOF" warning in e2e logs was a
follow-on symptom — the SSH client was being torn down by the abnormal close,
so any later channel-open returned EOF immediately.
* fix(ssh): resolve session executor_id via TaskSession join
GET /api/v1/ssh/executors/:id/sessions was filtering ExecutorRunning rows by
their ExecutorID column, but the lifecycle manager's buildRunningFromExecution
only sets that column from a prior row — for fresh sessions it's left empty.
The endpoint therefore returned [] for every just-launched SSH session.
Look up the TaskSession by session_id and compare its ExecutorID instead.
Keep the row's own ExecutorID as a fast-path for resume/recovery flows
where it's already populated.
* feat(web): register ssh entry in the new-executor type map
Without this entry, /settings/executors/new/ssh fell back to the
"unknown executor type" placeholder. Extracts the type map into its
own module so the page file stays under the 600-line lint cap.
The SSH-specific form is still TODO and will replace the standard
profile-create form for this type in a follow-up.
* test(e2e): poll listSSHSessions for SSH session row in group G
The simple-message scenario completes inside a couple hundred
milliseconds, so the previous "wait for executor_type=ssh, then
query once" pattern raced the row's removal during teardown. Poll
listSSHSessions directly with a 60s window so the row is observed
while the executor is up.
Adds dumpRemoteLogs helper for copying per-session agentctl.log
files out of the sshd container on assertion failure, easing
debugging when the row never appears.
* test(e2e): align H5 assertion with actual on-disk session-dir layout
The wrapper writes agentctl.pid and agentctl.log to <sessionDir>; the
remote agentctl port travels via AGENTCTL_PORT env + ExecutorRunning
metadata, not a separate .port file. Assert the files that actually
exist and the metadata field that carries the port.
* feat(web): mount SSH connection + sessions cards on dedicated routes
Wires the existing SSHConnectionCard and SSHSessionsCard into the
settings UI so the SSH executor flow has a home:
- /settings/executors/new/ssh renders SSHCreatePage (just the connection
card; Save POSTs a new executor and routes to the edit page).
- /settings/executors/ssh/[executorId] loads the executor and renders
the connection card pre-filled + the sessions card.
- Adds the SSH entry to the executors landing-page tile grid.
- Adds createExecutor / fetchExecutor / updateExecutor helpers to
settings-api so the new pages can talk to /api/v1/executors directly.
Profile management for SSH executors still flows through the existing
profile pages; this commit only adds the executor-level chrome the
SSHSettingsPage e2e tests expect.
* fix(web): keep SSH trust checkbox visible after editing a connection field
Previously, editing any form field nulled out `result` so the entire
TestResultDisplay (including the trust checkbox) unmounted. The trust-gate
e2e specs assert that after editing host/port/user/identity_source, the
trust checkbox is still present but unchecked — which matches the
intended UX: the user can re-test against the new target and re-tick
trust without losing the prior result for reference.
Now an edit only clears `trust` when the field could route to a
different machine (host_alias, host, port, user, identity_source,
identity_file, proxy_jump); the result panel stays mounted. Editing the
display-only `name` leaves trust alone.
* test(e2e): point SSHSettingsPage at the new SSH executor routes
Updates the page object to navigate to the SSH-specific routes that now
host the connection + sessions cards:
- gotoNew(): /settings/executors/new?type=ssh → /settings/executors/new/ssh
- gotoExisting(): /settings/executors/[executorId] → /settings/executors/ssh/[executorId]
The old URLs collided with the standard profile-create / profile-edit
flow and were never going to render the SSH cards. The new paths give
the SSH UI its own surface, leaving the generic profile pages untouched.
* feat(api): add top-level DELETE /api/v1/executor-profiles/:profileId
Profile IDs are globally unique, so callers that only have the
profile id (e2e api client, CLI tooling) shouldn't have to plumb
the executor id through. Aliases the existing nested handler.
* test(e2e): probe SSH fingerprint via kandev, not ssh-keyscan, in K specs
regenerateHostKey was returning the ssh-keyscan fingerprint, but
ssh-keyscan and the Go ssh client can negotiate different host-key
types — meaning the fingerprint kandev observes during a real probe
does not always match what keyscan saw. The keyscan output was used
verbatim as the expected value, which K1 / K3 then asserted against
kandev's pinned-fingerprint result, so the specs flapped depending
on which algorithm sshd advertised.
Drop the return value from regenerateHostKey and have callers hit
/api/v1/ssh/test to learn the canonical fingerprint, matching what
the SSH fixture already does at seeding time.
K2 was polling env.error_message which doesn't exist — the launch
fails at SSH dial time before the executor is recorded on the task
environment. Point the polling at the task-session error_message
instead, where updateTaskSessionState actually persists the dial
failure.
* test(e2e): wipe agentctl before F5 to assert from a fresh-install state
F5 asserts that the agentctl_action probe reports "uploaded" before
the first launch and "cached" after. Tests share a worker-scoped
sshd container, so an earlier test in the same worker may have
already primed the cache, making the "before" assertion flap.
Wipe ~/.kandev/bin/agentctl + .sha256 from the container at the top
of F5 so the assertion sees the documented fresh-install path.
Export execInContainer so the spec can reach into the container
without copying the docker-exec boilerplate.
Add error_message to the listTaskSessions return type so the
hostkey-rotation spec can read the field (which the backend already
returns).
* fix(ssh): re-read ~/.ssh/config on every resolve, no process-wide cache
kevinburke/ssh_config's package-level Get/GetStrict use a sync.Once
to load $HOME/.ssh/config once per process and cache the result. That
breaks two things:
* users who edit their config mid-session don't see updates until
kandev restarts;
* e2e tests that write a fresh ~/.ssh/config per test all see the
state captured by whichever test triggered the first lookup.
Open and Decode $HOME/.ssh/config on demand from a local
inheritFromSSHConfig helper. The library still parses the file the
same way — we're just dropping the global cache.
Unblocks the four ssh/config-inheritance.spec.ts cases that wrote a
per-test ~/.ssh/config.
* feat(ssh): parse literal user@host:port ProxyJump bastion strings
dialViaJump fed target.ProxyJump straight into ResolveSSHTarget as a
host alias. That works for `Host prod-jump` entries in ~/.ssh/config
but turns the literal `user@host:port` form into a single hostname
that the kernel resolver chokes on (`lookup kandev@127.0.0.1:23000: no
such host`).
Detect the literal shape inline (`[user@]host[:port]`) and build the
bastion SSHTarget from its parts. Falls back to the alias path when
no @ / : separators are present.
Fixes the proxy-jump.spec.ts bastion flow. While here:
* scanFingerprintInsideNetwork: alpine package is `openssh-client`,
not the (nonexistent) `openssh-keyscan`. Surface install errors
so future failures aren't silent.
* scanFingerprintViaHost: retry on empty output — sshd accepts TCP
before host-key negotiation completes on a cold container.
* startBastionAndTarget: share one keypair across bastion + target
so a single -i auths both hops (matches how OpenSSH ProxyJump
handles per-host identities outside ~/.ssh/config).
* proxy-jump N1: assert any SHA256 fingerprint came back, since the
test no longer pre-discovers a value to compare against.
* test(e2e): time-bound the drop-traffic SSH probe with an AbortController race
iptables -A INPUT -p tcp --dport 22 -j DROP silently discards SYN
packets — Go's net.Dialer sits in the connect syscall through the
kernel's TCP_SYN_RETRIES (default 6 ~ 127s) before the syscall is
abandoned, even though the dialer's logical Timeout is 30s. The
spec polled the testSSHConnection API for the failure path; the
request blocked long enough that Node's keep-alive evicted the
socket and the test failed with "other side closed" instead of
seeing kandev's success=false response.
Race the probe against a 5s timeout. If the request errored or
timed out the test passes (both are valid evidence that the drop
hit the dial path); if it came back with a response, assert
success=false the same way the original spec did. The restore-probe
poll still gates on a real success after restoreTraffic.
* test(e2e): rerun ssh.test in hostkey-rotation afterEach to repin
Hostkey-rotation specs mutate the worker-scoped sshd container and
the seeded SSH executor's pinned fingerprint. Without a cleanup hook,
the next spec in the same worker that resolves seedData.sshTarget.
hostFingerprint observes a stale value and the UI's trusted-badge
check (persistence R1) flaps.
Add an afterEach that re-probes the live container via kandev, syncs
the fingerprint into both seedData and the seeded executor's pinned
config. The cleanup is a no-op when the probe fails (e.g. K2 left an
intentionally bad fingerprint that no longer matches anything — the
next test will re-establish state via its own setup).
* test(e2e): restore the seeded executor's pinned fingerprint after R5
The fingerprint-change-warning spec pinned a deliberately bogus
fingerprint on the worker's seeded SSH executor to exercise the
mismatch UI, then exited without resetting it. Later specs in the
same worker that launched real tasks against the same executor
(workdir-per-profile R1/R2 in alphabetical order) failed at SSH dial
time with host-key-changed, since the executor was still pinned to
the bad value.
Wrap the assertion in a try/finally that restores the original
fingerprint from seedData when the test ends, so the worker leaves
the executor in the same state it inherited.
* fix(ssh): quote every remote path + clean identity file path
CodeQL flagged two paths from HTTP-supplied SSH-config fields into
shell + filesystem operations:
* runSSHCommand built "cat $remoteShaFile" / "test -x $remoteBin"
/ "mkdir -p $(dirname $remoteBin)" by direct concatenation; the
arguments come from $HOME on the remote (not the kandev user)
but the analyzer can't see that, and a remote $HOME containing
shell metacharacters would still misparse. Route them through
shellQuote for parity with every other call site in the file.
* dialAuth opened target.IdentityFile straight from the configured
string. Run it through filepath.Clean so any `..` segments slipped
in by string substitution are normalised before os.ReadFile, which
is the canonical mitigation CodeQL recognises here. Behaviour is
unchanged for normal paths.
* refactor(ssh): drop the unused conn pool + remote curl dependency
CodeRabbit and Greptile both flagged the SSHConnPool: the executor never
took the pool path (CreateInstance always dialDirect'd a fresh client and
parked it on sshSessionState), so the pool's keepalive goroutines and
refcount logic were dead code. Get() also overwrote map entries on every
call, which would have leaked keepalive goroutines if the pool *had* been
used. Delete the entire SSHConnPool + sshConnKey + pooledConn + keepalive
plumbing. Export DialSSH so the SSH test endpoint can dial directly and
close the client when its single-shot probe is done.
While here:
* pickRemoteAgentctlPort: switch from time.Now().UnixNano()%20000 to
math/rand/v2.IntN. Two concurrent CreateInstance calls on a fast
machine were getting the same port (UnixNano cycles in ~20µs through
the 20k range); randomized picks avoid the collision.
* createRemoteAgentInstance: POST to the remote control port over a
direct-tcpip dial via net/http instead of shelling out to `curl`. The
sshd container no longer needs curl, the kandev test endpoint no
longer needs to probe for it, and the call inherits Go's standard
timeout + error handling. Drop `curl` from the e2e Alpine image.
* maybeUploadCredentials: was probing `printf %s "$HOME"` and
discarding the output, then allocating an unused sshFileUploader.
SSH v1 doesn't ship credential upload — just log a warning when a
user sets remote_credentials so they know it won't take effect, and
delete the dead uploader file.
* fix(ssh): verify bastion host key + tighten the trust-gate UX
Bastion host-key verification (security)
resolveBastion built the bastion's ClientConfig with an empty
PinnedFingerprint, which buildClientConfig translated into a
callback that accepts any key. An attacker on the path to the
bastion (DNS poisoning, route hijack) could pivot through it
before the final-target check ever ran. Greptile flagged it as P1.
Swap in a callback that consults ~/.ssh/known_hosts via
knownhosts.New: matched key → accept; mismatched key → reject loud
(the alarm); host absent → accept with the same TOFU semantics
OpenSSH uses for StrictHostKeyChecking=accept-new, so e2e and
first-connect setups still work without manual `ssh-keyscan`
priming.
Stale-test trust gate (frontend)
Editing a connection field after a successful test previously kept
the prior result + cleared `trust`, but the trust checkbox could
be re-checked and saved with the old fingerprint bound to the new
target. CodeRabbit + cubic both flagged it as P1.
Add a `resultStale` flag that flips when a CONNECTION_FIELD edit
follows a successful test, surface a warning under the result, and
disable the trust checkbox + save button until the user re-runs
Test Connection. handleTest clears the flag.
While here
* Surface onSave failures in the card instead of swallowing them.
* ssh-create-page: read the executors slice from the live store
(useAppStoreApi + getState()) at write time so a concurrent
update doesn't get overwritten by a stale closure.
* Split FingerprintTrustBlock into its own file to keep
ssh-connection-card under the 600-line cap.
* fix(ssh): defend launch + handshake against several real bugs
manager_launch: trusted exec-config keys override req.Metadata.
buildLaunchMetadata applied executor config only when the matching
key was missing in req.Metadata. A request that carried metadata.
ssh_host_fingerprint (or ssh_host, ssh_identity_*) could pivot the
launch to a different target and bypass the pinned fingerprint.
Pin a list of connection-routing keys (ssh_host, ssh_port, ssh_user,
ssh_host_fingerprint, ssh_identity_source, ssh_identity_file,
ssh_proxy_jump) and have the executor config always win for those.
Cubic / CodeRabbit P1.
executor_ssh.CreateInstance: reuse the resumed session state.
ResumeRemoteInstance attaches the recovered ssh.Client + forwarder
to r.sessions[InstanceID] and refreshes metadata, then the lifecycle
manager unconditionally called CreateInstance, which dialed a fresh
client and started a second remote agentctl on top of the live one
— leaking the resumed state. CreateInstance now early-returns from
the existing r.sessions entry via buildResumedInstance. Cubic P1.
executor_ssh.Close: actually release tracked sessions.
After dropping the SSHConnPool, Close was a no-op. A hard kandev
exit (no per-session StopInstance) left forwarders and SSH clients
open. Iterate r.sessions and Close the forwarder + client for each.
Cubic P2.
buildAuthMethods: close the ssh-agent unix socket after handshake.
Each agent-authenticated dial opened net.Dial("unix", $SSH_AUTH_SOCK)
and never closed it; only PublicKeysCallback held the agent.Client
reference and that callback is consulted exactly once at handshake.
Return a cleanup func from buildAuthMethods + buildClientConfig and
defer it from dialSSH / dialViaJump so the socket releases as soon
as key exchange completes. Greptile P1 security.
waitAgentctlHealthy: probe HTTP /health, not just the TCP listener.
The local port is owned by the SSH forwarder, which Accepts before
it Dials the remote direct-tcpip channel — a TCP connect can succeed
before the channel actually establishes. Issue a real GET /health
and require a 2xx so a broken tunnel surfaces here rather than at
the first agent operation. Cubic P1.
ssh-connection-card: also gate the trust + save on in-flight tests.
Editing a connection field during a pending test silently kept
resultStale=false because prev.result was still null; when the test
returned, the new fingerprint was bound to the old form values but
the gate let the user trust + save anyway. Treat in-flight tests as
prior tests for staleness purposes, and preserve resultStale across
the test's success setState. Cubic P2.
* fix(ssh): drop stale polls + preserve port inheritance + sshd extra-keys
ssh-sessions-card: race-protect polls.
Polling setInterval + manual refresh shared one state setter, so a
slow request that resolved after a newer call (or after a parent
switched executorId) overwrote fresh data with stale rows. Bump a
monotonic sequence on each refresh and drop the response when the
sequence has moved on, plus reset on mount and invalidate on
unmount so an in-flight reply from a teardown can't land. Cubic P2.
ssh-config parseSSHExecutorConfig: don't default ssh_port to 22.
Reading an executor row that had no ssh_port set rewrote port=22
on the form, which then round-tripped back to the backend. That
silently broke ~/.ssh/config Port inheritance for aliases — a save
could redirect connections to 22 even though the underlying alias
was supposed to resolve to another port. Leave the field undefined
so the backend resolver can apply the alias' value. Cubic P2.
ssh-image entrypoint: guard authorized_keys.extra mount.
When only /authorized_keys.extra (and not /authorized_keys) was
bind-mounted, the >> redirect ran under set -e against a missing
destination and aborted container startup. mkdir + touch the
destination before the append and reapply the ownership/perms.
CodeRabbit P2.
* test(e2e): make G2 + F6 actually exercise the contract
G2 (sessions-endpoint filter) iterated `for (const s of sessions)` over
the listSSHSessions result without first asserting `length > 0` — an
empty response let the test pass without checking anything. Seed an SSH
launch before the loop and require at least one row, so a handler
regression that returned [] would now fail loud. CodeRabbit P1.
F6 (ws ssh.test parity) called apiClient.testSSHConnection twice (HTTP
both times) and compared the two HTTP responses, which would have
passed even if the WS dispatcher entry was broken. Use apiClient.
wsRequest("ssh.test", payload) for the second call so the gateway's
WS handler is actually invoked, and assert the step names match across
transports. CodeRabbit P1.
* refactor(e2e): extract SSH HTTP shapes into api-client-ssh.ts
api-client.ts was already over the 600-line lint cap on main (1528
lines); the SSH additions made it worse. Split the SSH HTTP shape
types into a dedicated module and re-export from api-client.ts so
existing callers keep working. The methods themselves stay on
ApiClient as thin pass-throughs since splitting them out across the
class boundary would change every test call site.
Also document the per-executor bound on the SSH listSessions per-row
GetTaskSession lookup (typical N < 10), and what a batch path would
need (a repo method to fetch task_sessions by id list). Cubic /
Greptile P2.
* docs(spec): correct SSH recovery keying after pool removal
The spec said ResumeRemoteInstance re-opens 'per (host, user) — one
connection serves all surviving sessions on that host', which was
the pool design. The current executor gives each session its own
SSH client, so the resume keys on the full (host, port, user,
identity_*, proxy_jump, host_fingerprint) tuple. That way two
profiles on the same host with different keys can resume side by
side without merging. Cubic P2.
* fix(ssh): IPv6 ProxyJump + port range + dedup + docker timeouts
parseLiteralProxyJump: handle bracketed IPv6 + reject invalid ports.
The literal parser used LastIndex(":") to split host from port, which
for [2001:db8::1]:22 left host as "[2001:db8::1]" and produced an
invalid double-bracket address through net.JoinHostPort. Recognise
the bracketed form explicitly via a parseBracketedHostPort helper
and strip the brackets. Validate port is in [1, 65535] instead of
accepting any integer (Atoi happily parses negative or out-of-range
values). Split the host/port branch into its own function so the
nesting stays under the golangci nestif limit.
ssh-create-page: dedupe on append.
setExecutors([...current, next]) would double-list the same executor
if a WS event (or another refresh) inserted it while createExecutor
was in flight. Skip the append when current already has the id.
ssh-image fixture: time-bound docker probe + build.
hasSSHContainerSupport ran `docker info` with no timeout — an
unreachable / hung daemon would stall the Playwright worker
indefinitely. Cap at 10s for the probe. buildE2ESSHImage runs
`docker build` with no timeout; cap at 15 min so a stuck registry
pull or BuildKit hang fails fast.
* fix(ssh): reject invalid ssh_port + retry in-net keyscan + restore D5 + doc count
executor_ssh.targetFromMetadata: reject malformed / out-of-range
ssh_port instead of silently falling back to 0 → 22 in the resolver.
"abc", "0", "70000" all now return a "must be 1-65535" error so a
broken config can't masquerade as a successful launch routed through
port 22. Cubic P2.
scanFingerprintInsideNetwork (bastion fixture): retry on empty output.
Mirrors the host-side scanFingerprintViaHost retry loop — sshd accepts
TCP before host-key negotiation completes on a cold container, so the
keyscan can come back empty on the first try. Bound at 15s; surfaces
"status=..., stderr=..." on final failure for diagnosis. Cubic P2.
executor-crud D5 (changing config…): restore the seeded executor in a
try/finally. The test pinned the executor to host=10.255.255.1 to
verify the snapshot stayed sticky on the live session, but never put
the real host back, so any later spec in the same worker that reused
seedData.sshExecutorId would dial the unroutable address and hang.
Cubic P2.
e2e-plan.md: replace the "roughly 75" estimate with the actual 80 /
17-files current count plus the ~2.4 min wall-clock. Cubic P3.
* fix(ssh): use bare mock-agent name so the remote PATH resolves it
For SSH the agent runs on a remote host whose filesystem doesn't share
paths with the kandev backend's, so the host-absolute mock-agent path
configureMockAgent computes can't apply. Extend the bare-name branch in
MockAgent.BuildCommand to include RuntimeSSH (the SSH e2e image already
bakes mock-agent into /usr/local/bin) and drop the now-redundant SSH e2e
bind-mount that worked around this by mirroring the host path into the
container.
* fix(ssh): unique sftp temp filename so concurrent uploads don't collide
When two sessions on the same task launch back-to-back they both call
ensureAgentctlOnHost which streams to <remotePath>.tmp before renaming.
With a shared .tmp name the second uploader's rename errors with
"file does not exist" once the first uploader's rename consumed the temp
file. Give each uploader its own pid+random-suffix temp; uploaders write
identical sha256-keyed content, so the rename race is then safe.
* fix(ssh): don't leak session-scoped metadata across sibling sessions
reuseExistingEnvironment copies persistent metadata from the previous
ExecutorRunning row into the new launch request so executors can pick up
worktree/container/sandbox IDs. For SSH that swept in session-scoped
keys too — agentctl PID/port, session dir, local forward port — which
made the second session's ResumeRemoteInstance reattach to the first
session's agentctl process. Mark those keys as session-scoped and skip
them in applyExecutorRunningMetadata; the same-session resume path
(applyRunningRecordToResumeRequest) still copies them because it works
off the session's own ExecutorRunning record.
* test(ssh): cover ProxyJump parsers + sibling-session metadata filter
Addresses the two coverage gaps Claude flagged on PR review round 3:
- parseLiteralProxyJump / parseProxyJumpHostPort / parseBracketedHostPort
/ parsePortString are pure parsers that gate every ProxyJump dial,
including IPv6 (`[2001:db8::1]:22`). Table-driven tests pin the happy
paths and the bracket / port / range edge cases — silent regressions
in bracket stripping would otherwise break every IPv6 ProxyJump
session without a single test failing.
- applyExecutorRunningMetadata is the function commit
|
||
|
Carlos Florêncio
|
adc13c6b5a | feat: copy gitignored files from repo into new worktrees (#946) (#950) | ||
|
José Almeida
|
3bc092bf20 |
feat(terminal): first-class user terminals — stable seq, rename, park/resume (#1009)
* feat(terminal): persist user terminals with stable seq + park state
Ordinary user shells now have a DB-backed `user_terminals` row keyed by
the agentctl PTY id, carrying a per-task monotonic seq (gaps preserved on
delete), custom_name override, and open/parked state. The terminal
service owns the create/list/rename/park/resume/destroy surface and
guards reject `bottom-panel` (cmd+J) + `script-*` ids so passthrough
flows are untouched. Closing a tab now parks (PTY keeps running);
destroy kills the PTY and removes the row.
* feat(web): expose terminal seq badge, rename, and parked-terminals menu
Wires the right-panel strip and SSR page state to the new task-keyed
terminals endpoint and discriminated UserShell union, adds the `#N`
badge for ordinary terminals, plumbs context-menu / double-click rename,
and renders a "Parked" submenu so closed-but-running terminals can be
resumed. Closing a managed tab now parks instead of destroying so the
PTY (and its buffer) survives accidental closes.
* test(terminal): e2e coverage for first-class persistent entities
Covers the persistence guarantees the user explicitly called out:
monotonic seqs, refresh-survives-rename-and-park, gap-preserving destroy,
park+resume cycle, and bottom-panel/script guards. Exercises the new
user_shell.{create,list,rename,park,resume,destroy} WS actions through
the shared ApiClient.wsRequest helper.
* fix(terminal): atomic seq allocation + propagate destroy errors
- Repository.Create folds MAX(seq) read + INSERT into a single
`INSERT … SELECT` statement so concurrent creates can no longer pick
the same seq. Locked in with TestCreate_ConcurrentSeqAllocation (25
parallel creates, all unique).
- wsUserShellStop now propagates the service-Destroy error so the
frontend stops optimistically removing a row the backend failed to
delete.
- Service.Destroy / CleanupTask log PTY-stop failures at Warn (instead
of silently swallowing) while keeping the proceed-on-failure semantics
intentional — the DB row is the source of truth for "user expects
this terminal gone".
- IsUserShellAlive copies ProcessID under the read lock before calling
r.Get(), removing the post-unlock pointer-deref race.
- Get-not-found test asserts errors.Is(err, ErrNotFound) so it locks to
the repository contract.
* fix(web): close-tab waits for backend ack + className undefined guard
- handleCloseTab defers `removeTerminal` into the `.then()` of the
park/destroy promise. A failed backend call leaves the tab visible
rather than vanishing it optimistically; the next `user_shell.list`
poll reconciles state.
- session-tabs guards `tab.className` with `?? ""` so an undefined value
no longer produces "undefined group relative..." in the rendered
class string.
- user-shells.test simplification: `createSessionRuntimeSlice` only
consumes `set`, so the test passes the slice creator straight to
`immer()` instead of wrapping it in an adapter with unused args.
* fix(terminal): task-scoped mutations + legacy-shell list + UI hardening
Round-2 review feedback (cubic P1/P2, claude, coderabbit):
Backend:
- Rename/Park/Resume/Destroy now require a task_id and verify the
terminal belongs to that task via a shared requireOwnership helper.
Cross-task mutations return ErrTaskMismatch instead of silently
succeeding by raw terminal id.
- wsUserShellList no longer drops managed-shaped agentctl shells when
the terminal service is disabled or task_id is missing — legacy
passthrough callers see their existing shells again. `managedCovered`
flag scopes the orphan filter to the DB-backed path.
- service_test.go uses the shared-cache in-memory SQLite + MaxOpenConns(1)
setup, matching repository_test.go and removing the flake-one-race-away
warning.
- New cross-task guard tests: TestRename_RejectsCrossTask,
TestPark_RejectsCrossTask, TestDestroy_RejectsCrossTask, plus a
TestRename_EmptyTaskIDSkipsOwnership for internal callers.
Frontend:
- updateUserShell patch type narrowed to Partial<Omit<UserShellInfo,
"terminalId">> so the row key can't be silently mutated.
- destroyUserShell now throws on a missing WS client instead of silently
resolving — handleCloseTab's .then() no longer fires prematurely.
- rename/park/resume/destroy API client + useTerminals hook plumb the
active task id through every mutating call.
E2E:
- New "cross-task mutating ops are rejected" spec creates a terminal
under task A and verifies task B can't rename/park/destroy it by raw
id.
- Existing specs updated to send task_id with their mutating calls.
* fix(terminal): require task_id on all mutators + wire taskID into hooks
Round-3 review feedback (cubic P1, claude blocker, coderabbit):
Backend:
- requireOwnership no longer skips the ownership check when taskID is
empty. The previous carve-out was reachable from the WS layer (where
task_id is user-controlled), so an attacker who guessed a terminal id
could omit task_id and mutate any row. CleanupTask walks the repo
directly and never touched the bypass.
- TestRename_EmptyTaskIDRejected pins the new contract.
Frontend (the real bug claude caught):
- useUserShells now accepts a taskId parameter and forwards it on the
user_shell.list WS call. Without it the backend's DB-backed ordinary-
shell path was skipped and the Zustand store wiped the SSR-hydrated
panel strip on the first WS fetch.
- Response mapping switched to a discriminated union: id (new field)
falls back to terminal_id (legacy), and kind/seq/state/pty_status/
display_name/custom_name flow into the store so the parked-terminals
submenu actually populates.
- useTerminals + useMobileTerminals read the active task id from the
store and pass it through to useUserShells.
- destroyUserShell now retries with user_shell.stop when the server
returns an unknown-action error — keeps the rollout-window
compatibility intact for older backends that only know the legacy
action name.
* fix(terminal): list parked, rollout-safe kind default, helper extraction
Round-4 review feedback (claude + greptile P1):
- useUserShells now sends include_parked: true so the "Parked terminals"
submenu populates after a page reload. Previously the WS list returned
only state=open rows; parked terminals were invisible until the user
parked something in the same session. The main strip still hides
parked entries via buildTerminalsFromShells.
- useAddTerminal stops blindly defaulting kind to "ordinary" — that
misclassified legacy passthrough payloads (terminal_id without seq)
during a rollout where the frontend is newer than the backend. The
managed-tab path then called parkUserShell on a server that didn't
know the action. Now only tags as ordinary when kind is explicit or
the row carries a seq.
- handleCloseTab extracted into a standalone useCloseTab + helpers
hoisted into use-terminals-build.ts / use-terminals-types.ts. Brings
use-terminals.ts back under the 600-line file limit and the
useTerminalActions wrapper inside the 100-line function limit.
* fix(terminal): scope-keyed shell cache + null-task guard + tighter rollout default
Round-5 review feedback (cubic P1, coderabbit x4):
- useUserShells now keys its fetch cache on env+task (`${env}:${task}`),
not just env. An earlier load without a task id (e.g. before the
active task hydrated) no longer pins the store on a legacy-only shell
list and blocks the task-scoped refetch.
- useMobileTerminals delays auto-create until a real taskID is
available. Previously a null taskID could bootstrap a legacy
non-persistent shell, mark the env as auto-created, and starve the
real task of its first-class terminal. Guard key is now env:task, and
releaseAutoCreatedEnvironment clears every scope on that env.
- useAddTerminal tightens the rollout check: a row is "ordinary" only
when `seq !== undefined`. A bare `kind: "ordinary"` without seq from
an older backend stays legacy so close → destroy on the first click.
- useRemoveTerminal reads the current activeTab from a ref instead of
closing over the value captured when handleCloseTab first ran. Async
park/destroy resolves after a user tab-switch no longer clobber the
newer selection with the stale fallback shift.
Tests:
- New "waits for taskID before auto-creating — null taskID is a no-op"
case in use-mobile-terminals.test.ts confirms the null-task guard.
- All existing mobile-terminal + slice + E2E tests pass.
* fix(terminal): live activeTab lookup + selectable-tab guard
Round-6 review feedback (cubic P2 x2):
- getActiveTab now reads the active tab from the Zustand store via
storeApi.getState() instead of a useRef/useEffect pair. Closes the
post-render race where an async close handler could resolve between
the new render's commit and the effect-driven ref sync.
- computeTerminalTabValue requires activeTab to be selectable
(present in `terminals` or === "commands") before honoring it. A
stale id left over from a parked/destroyed terminal no longer pins
the panel on a nonexistent tab and blocks the fallback shift to a
real shell.
* chore(terminal): inline savedTabFromStorage to drop file under line cap
Round-7 review feedback (claude suggestion): the useMemo around the
synchronous getSessionStorage call was zero-value memoisation that
pushed use-terminals.ts three lines over the 600-line max-lines limit.
Inlined; file now at 600 lines.
* chore(terminal): drop savedTabExists local + comment to land under 600 lines
Round-8 follow-up (claude): the previous commit's two-line comment block
held the file at 603 lines (still over the 600-line cap). Inline
savedTabExists at the only call site and remove the redundant comment —
the round-7 PR thread already explains why the useMemo was removed. File
now at 599 lines.
* fix(terminal): plumb task_id through dockview + tolerate legacy destroys
Manual-test feedback: clicking X on a dockview terminal panel surfaced
"destroy terminal: terminal does not belong to the supplied task" because
the dockview path was creating + destroying terminals without sending
task_id at all. The new requireOwnership guard then correctly rejected
the empty task_id against a non-empty term.TaskID.
Frontend:
- addTerminalPanel grows task_id + title parameters; stamps both into
panel params at creation time so the destroy cleanup can pass them
back to user_shell.destroy / .stop.
- Every dockview-side createUserShell call site now passes the active
task_id, so the backend creates a DB-backed ordinary terminal (with
seq + displayName) instead of a legacy passthrough shell.
- destroyUserShell + stopUserShell already accepted an optional task_id;
dockview-layout-setup.onDidRemovePanel now reads the stamped task id
from panel params and forwards it.
Backend:
- wsUserShellStop now requires both terminalSvc and a non-empty
req.TaskID before routing through the managed service. An empty
task_id falls through to the legacy passthrough StopUserShell so older
clients (and dockview panels persisted before task_id was stamped)
keep working.
Known follow-ups (separate task): the #N badge, rename context menu,
and parked-terminals dropdown still only show on the mobile/tablet
right-panel strip. Desktop dockview shows the seq inside the panel
title text but doesn't expose the badge/rename/parked-list UI yet.
* feat(terminal): dockview tab badges + rename context menu + existing-terminals list
Manual-test feedback round 2:
- Custom dockview tab component (TerminalTab) renders the #N pill
only when the active env has more than one ordinary terminal —
mirrors the session-tab badge semantics. Right-click on any ordinary
terminal tab now exposes Rename / Park / Destroy.
- Dockview + menu picks up a new "Terminals" section listing every
ordinary terminal for the active task (open and parked). Clicking a
row focuses the existing dockview panel if one is mounted, otherwise
re-opens it; parked rows are auto-resumed via user_shell.resume
before the panel is added. The base "Terminal" action was renamed
to "New Terminal" so the existing-terminals list is distinguishable
in the menu.
- Reopen menu uses a stable EMPTY_SHELLS sentinel for its store
selector to avoid Zustand infinite re-renders when the env has no
shells.
E2E:
- terminal-new-tab.spec uses getByRole("menuitem", { name: "New
Terminal", exact: true }) to disambiguate from the new "Terminals"
submenu label.
- Full terminal suite still passes (26/26).
* fix(terminal): tab title shows "Terminal" with seq as badge, populate store on session page
Re-reading the user feedback: the title text was rendering as
"Terminal 1" (backend's displayName), and the dockview "+" menu's
Terminals section was empty because nothing on desktop was calling
useUserShells to populate the store.
- TerminalTab.pickDisplayName now returns the literal "Terminal" for
ordinary terminals (custom names still override). The seq lives only
in the sibling badge — same split as session-tab where the agent
name is the title and the seq is a pill before it. Reading "Terminal
1" out of "[1] Terminal" instead of "[1] Terminal 1".
- LeftHeaderActions (dockview "+") now calls useUserShells on mount.
Without this the desktop layout never triggered the WS list fetch,
so the Terminals submenu and the badge "count > 1" check both saw
an empty store and silently disappeared.
- TerminalReopenMenuItems also calls useUserShells defensively (cheap
thanks to scope-keyed cache) so it works when mounted in isolation.
* feat(terminal): "New X" rows live inside their section labels
User feedback: move "New Agent" under the Agents section header and
"New Terminal" under the Terminals section header so the dockview "+"
menu reads top-to-bottom as Agents → New Agent → existing sessions →
Terminals → New Terminal → existing terminals → other panels.
- SessionReopenMenuItems accepts an optional onNewSession prop and
renders the "New Agent" row as the first item under the "Agents"
label. Render gate now keeps the section visible whenever the create
handler is supplied, even with zero existing sessions.
- TerminalReopenMenuItems gets a matching onNewTerminal prop with
the same behaviour ("New Terminal" row under the "Terminals" label).
- dockview-add-panel-items drops its standalone "New Agent" and "New
Terminal" rows since both now live inside their sections.
* feat(terminal): auto-migrate default panel to DB-backed ordinary terminal
The legacy `terminal-default` dockview panel was hard-wired to a
non-managed `shell-default` PTY so it never picked up an ordinary
seq/customName/parked state — the new "Terminal N" badge UX could
only show a badge once the user had explicitly created a second
terminal. With useEnsureDefaultTerminalOrdinary the default panel is
upgraded into a real `shell-<uuid>` row on session-page mount, so
every visible tab is now a first-class ordinary terminal.
Plus a UI-level e2e spec asserting the multi-terminal title + badge
contract, and an expectation bump on the existing rename+park spec
since visiting the session page now mints 1 extra ordinary terminal.
* fix(terminal): park ordinary terminals on tab close so they survive refresh
Dockview's tab X close button routed straight to stopUserShell (an
alias for destroyUserShell), wiping the DB row on close — after a
refresh the user had no way to resume a still-running PTY they had
just tucked away.
The X is now a "hide for now" affordance: ordinary terminals get
parked (PTY survives, row stays in DB, reappears in the "+" →
Terminals menu with a `parked` pill), while scripts / bottom-panel /
legacy passthrough shells stay on the destroy path because they have
no resume story.
Permanent delete still lives on the right-click Destroy menu item
and (in the next commit) on each reopen-menu row.
* fix(terminal): preserve DB-backed terminal panel ids across layout restore
The serializer's normalizePanel rewrote every user-created terminal
panel id to `terminal-saved-N` and dropped environmentId/taskID from
params, so after a reload that panel couldn't be matched back to its
live PTY or its store record — the tab rendered with no badge and a
stale fallback title.
Treat `shell-<uuid>` panel ids the same way we already treat
`terminal-default`: preserve id and params on restore. Legacy
ephemeral `terminal-saved-*` ids still mint a fresh PTY on restore.
Also force tabComponent=terminalTab and title="Terminal" for any
restored terminal panel so layouts persisted before the badge UX
land on the new presentation.
* feat(terminal): destroy button on reopen-menu rows for permanent delete
Destroy used to live only on the tab's right-click menu — useless once
the tab was already closed. Each ordinary terminal row in the dockview
"+" → Terminals submenu now ends with an × button that confirms-then
calls destroyUserShell, killing the PTY and dropping the DB row so the
terminal does not reappear after reload.
Pairs with the previous close-to-park change: closing the tab parks
(soft, resumable), the × button on the menu row destroys (hard,
permanent).
* fix(terminal): reopen-menu focuses existing tab, drops parked pill, says Terminate
Three small fixes to the dockview "+" → Terminals submenu:
1. Clicking a row whose terminal is already mounted now FOCUSES the
existing panel instead of duplicating it. The default-migrated
panel keeps its registry id `terminal-default` even after the
migration to a `shell-<uuid>` PTY, so a direct getPanel(uuid) miss
would fall through to addTerminalPanel and create a second tab for
the same PTY. Fall back to scanning `params.terminalId` so the
lookup catches that case.
2. Drop the "parked" pill from the row — parking is now an internal
detail (close = park) that the user doesn't need to read off the
menu. Clicking the row brings the terminal back into view either
way, so distinguishing it visually is noise.
3. Rename the row × tooltip + confirm copy from "Destroy" / "Permanently
delete" to "Terminate" to match the new tab-context-menu label.
Spec: add a test that asserts no duplicate tab when reopening an
already-open terminal, and drop the parked-pill assertion from the
existing close+reload test.
* feat(terminal): empty-group watermark uses the rich + menu
When a user splits a group (split-right / split-down) the new half is
empty and dockview renders the watermark. Before this, the watermark
showed a hard-coded Agent/Plan/Terminal/Browser row and clicking
"Terminal" called createUserShell without a taskId — so it spawned a
legacy passthrough shell that never appeared in the user-shell list,
and clicking "Agent" only ever focused the singleton chat panel
(invisible if the task had multiple sessions).
The watermark now renders the same AddPanelMenuItems content the
header "+" uses, so the user gets:
- The Agents list (existing sessions, greyed when already open)
- The Terminals list (existing terminals, greyed when already open)
- The Browser/Plan/VS Code/Changes/Files/PR options
…served behind a single "Add panel" dropdown trigger centered on the
empty group.
* feat(terminal): inline rename on the tab; drop Park, rename Destroy → Terminate
The tab title is now editable in place — picking Rename from the
right-click context menu swaps the title for an input. Enter commits,
Escape / blur-with-no-change cancels, and the new name is pushed
through renameUserShell + the user-shell store so the API and badge
list stay in sync. Replaces the previous window.prompt which felt
out of place in the dockview chrome.
While here:
- Drop the "Park (hide, keep PTY)" context-menu item. Tab close
already parks ordinary terminals, so the explicit Park action was
redundant and broke the "one obvious affordance per outcome" rule.
- Rename "Destroy" → "Terminate" in the context menu. Matches the
reopen-menu × tooltip and reads more like a system action than a
destructive UI primitive.
Spec adds an inline-rename test asserting the input appears, accepts
typed text, and commits the new title to the tab.
* fix(terminal): right-click Terminate closes the tab; drop displayName DOM warning
Two unrelated fixes both landing in terminal-tab.tsx:
- Terminate used to fire the WS destroy and update the store, but left
the dockview panel mounted with a dead PTY underneath. Now it
optimistically drops the shell row from the store, closes the panel
via api.close(), then sends the destroy — same effect as the X close
but routed to the hard-destroy path (the onDidRemovePanel cleanup
sees no shell entry and skips its park branch).
- TerminalTabBody typed `displayName` as a prop but never destructured
it, so {...props} spread it into DockviewDefaultTab and on into a DOM
div, triggering "React does not recognize the `displayName` prop on
a DOM element". Drop it from the spread.
* feat(terminal): polish + menu — badge-style indices, flush-left New rows, terminate closes panel
Polish pass on the dockview "+" → Agents / Terminals submenus:
- Replace the plain `#N` text with the same pill-style badge the tabs
use (small bg, rounded, 11px). Agents and terminals both pick this
up — so the menu row reads "[N] label" matching the tab style.
- Drop the empty index-column placeholder span on the "New X" rows so
the icon + label sit flush-left under the section header instead of
awkwardly indented.
- Strip the backend "Terminal {seq}" suffix from row labels — the
badge already carries the number, so showing "Terminal 1" next to
the "1" pill duplicated it. Custom-renamed terminals still show
their name.
- The row × button now also closes the dockview panel if the terminal
is currently open, mirroring the right-click → Terminate flow.
Spec: switch the row-by-seq lookups from `hasText: "#N"` (now stale
since the `#` prefix is gone) to a `has:` filter against the new
`reopen-terminal-seq-N` badge testid, and add a regression test for
right-click → Terminate closing the tab and removing the row in one
gesture.
* fix: address terminal review feedback
* fix: resolve terminal review suggestions
* fix: catch terminal close stop failures
* fix: harden terminal terminate failures
* fix: use pinned pnpm docker arg
* fix: satisfy backend lint after main merge
* fix: stabilize e2e after layout merge
|
||
|
João Salavisa
|
f3daeaf416 |
feat(cli-mode): forward Preview chat input to PTY in passthrough sessions (#1042)
* feat(cli-mode): route Preview chat input through PTY stdin in passthrough sessions
Branch Executor.Prompt on lifecycle.Manager.IsPassthroughSession so that
follow-up prompts from any UI surface (the kanban Preview screen, mobile
session view, etc.) reach the running CLI agent via PTY stdin instead of
silently falling through to the ACP path. WritePassthroughStdin failures
propagate so Service.handlePromptError reverts session state and surfaces
the error; MarkPassthroughRunning failures are non-fatal because the data
is already in the PTY.
Closes the backend half of #989; the Preview-side UI compose box ships
in a follow-up commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(cli-mode): add Preview-screen compose box for passthrough sessions (#989)
In the kanban Preview tab, render a small kandev-controlled composer below
the PassthroughTerminal when the session is is_passthrough. Submitting (Enter
or click) posts message.add over WS — the backend's Executor.Prompt routes
passthrough sessions to PTY stdin so the CLI agent actually receives it.
Shift+Enter inserts a newline; empty/whitespace input is disabled.
This closes #989 together with the previous backend commit.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(cli-mode): warn when dropping attachments on passthrough prompts
Code review found that a passthrough prompt carrying non-empty text and
attachments silently dropped the attachments — surprising for any UI
surface (e.g. the full-page TaskChatPanel) that lets users attach images
to a passthrough task. The plan flagged this exact "silent drop" risk.
Pass attachments into promptPassthrough and log a warning with the
count when any are dropped; empty-text-with-attachments still errors
out as before. Adds a regression-guard test.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(cli-mode): cover passthrough composer routing end-to-end
QA pass added integration-level tests at the Service.PromptTask layer
that exercise the full wiring (real Service + real Executor, with a
mocked agent manager) for the three issue-#989 acceptance paths:
prompt-routes-to-PTY, empty-prompt-surfaces-error, and write-failure-
reverts-session. Also adds a unicode/multiline preservation guard at
the Executor.Prompt unit layer. Lives in a new file to avoid pushing
task_operations_test.go over the file-length-limit threshold.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(cli-mode): preserve composer text on send failure + clarify dispatchOnly
Addresses two pieces of PR #1042 review feedback.
1. PassthroughComposer used to clear the textarea unconditionally after
onSubmit resolved, but the WS handler swallowed transport errors and
resolved normally — so a network blip silently wiped the user's typed
message with no way to retry. Add a passthrough-specific send handler
that rethrows after toasting, and gate the setValue("") in the composer
on success. Preserves the ACP handler's swallow-and-resolve contract
to avoid leaking unhandled rejections into the TaskChatPanel chain.
New regression test: "preserves the typed text when onSubmit rejects".
2. Add a one-line comment at the passthrough branch in Executor.Prompt
explaining why dispatchOnly is not forwarded — PTY writes are inherently
fire-and-forget, so the flag has no analogue.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(cli-mode): toast disconnect + auto-grow passthrough composer textarea
Two follow-ups from PR #1042 review on commit
|
||
|
Carlos Florêncio
|
c9b6fe4b8a | fix(worktree): support fork PR worktree creation via pull refspec (#990) | ||
|
João Salavisa
|
f39e7b06ca |
fix(agent): honor session passthrough snapshot when starting agent process (#1003)
* fix(agent): honor session passthrough snapshot when starting agent process Tasks created in agent (ACP) mode got stuck in "starting" after toggling the profile's cli_passthrough flag and restarting the server. StartAgentProcess re-resolved the live profile each launch, so the new flag rerouted existing ACP sessions into the passthrough path (and vice versa), where the workspace plumbing didn't match. Snapshot session.IsPassthrough onto LaunchAgentRequest / lifecycle.LaunchRequest / AgentExecution and let StartAgentProcess use that as the source of truth. Sessionless launches (legacy controller.LaunchAgent) still fall back to live profile resolution. Fixes #981. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(agent): make passthrough snapshot the sole routing signal in StartAgentProcess Bot review feedback follow-up (#1003): - Route on the snapshot alone (new routePassthrough helper). A transient ResolveProfile error no longer silently routes a passthrough session to ACP — the fresh path surfaces an explicit error, the resume path surfaces the existing resolvePassthroughAgent error. - Add TestStartAgentProcess_PassthroughResume_SurvivesProfileResolveError and TestStartAgentProcess_FreshPassthrough_SurfacesProfileResolveError to lock the no-silent-ACP-fallback invariant. - Add TestLaunchPreparedSession_PropagatesIsPassthrough mirroring the resume-path propagation test so both build paths are independently covered. - Strip issue-number references from source/test comments per project convention. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(agent): avoid double ResolveProfile in sessionless passthrough path routePassthrough now returns (bool, *AgentProfileInfo). When the sessionless fallback path already resolved the profile, it threads it back so StartAgentProcess can reuse it for command building instead of calling ResolveProfile a second time. Snapshot-driven routing still returns nil so the snapshot path resolves fresh — the snapshot deliberately outlives any particular live profile state. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * fix(agent): extract startPassthroughExecution to satisfy nestif CI's golangci-lint flagged the nested-if complexity of the passthrough dispatch block in StartAgentProcess after the previous round of fixes pushed it past nestif's threshold of 5. Move the resume-vs-fresh branching plus the lazy profile resolution into a startPassthroughExecution helper so StartAgentProcess becomes a single short routing decision. No behavior change. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> * docs: drop caller reference from startPassthroughExecution comment Per project convention, source comments shouldn't name the calling function — the reason it's its own method is captured by its contract (profileInfo nullability + routePassthrough handoff), not by the caller's name. Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com> --------- Co-authored-by: Kandev Agent <agent@kandev.dev> Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com> |
||
|
Jérémy Coatelen
|
b39f256e84 | fix(orchestrator): propagate RepositoryID so worktree setup script runs (#969) |