* feat: press Enter on a dialog to run its semantic action
* fix: harden dialog Enter-to-confirm from review feedback
* fix: refine dialog Enter guards and fix prettier CI
* fix: coalesce ci auto-fix queue rounds
* fix: centralize ci auto-fix round cap
* fix: keep ci auto-fix state fresh
* fix: refine ci auto-fix round status
* fix: handle ci auto-fix exhaustion edge cases
* fix: reduce ci auto-fix dispatch complexity
* fix: refresh pending ci auto-fix before direct prompt
* fix: harden ci auto-fix queue replacement
---------
Co-authored-by: root <root@kandev.ts.net>
* feat(web): surface PR mergeability + conflict state in the CI popover
The CI hover popover showed checks/reviews but nothing about mergeability, so an
unmergeable PR silently dropped its merge button with no reason. Add a mergeability
row that reuses the detail panel's conflict banner + "Resolve conflicts" agent prompt
for dirty PRs, a "Behind base" chip, and a branch-protection note explaining why a
blocked PR is gated. Replace the compact merge split-button+dropdown with an inline
primary + "or <method>" buttons so the menu's detached portal no longer closes the
hover popover.
* feat(web): reflect PR mergeability in status colors and badges
The PR status pill, badge, and chat-input CI chip derived their colour from
checks/reviews only, so a conflicted or blocked PR still read as a green "all good"
check. Map dirty -> red, behind -> amber, and branch-protection blocked -> amber across
getPRStatusColor, the PRStatusIcon badge, and the chip glyph, so the indicators agree
with the popover. Blocked stays sky/in-progress while a requested review is still
outstanding (that's the awaiting-review gate, not a hard block).
* refactor(web): remove dead merge-menu keep-open plumbing
The compact merge control was redesigned to inline buttons (no dropdown portal),
which already fixes the hover popover closing. That leaves the keepOpen ref /
setKeepOpen / onMergeMenuOpenChange / onMenuOpenChange chain threaded through
usePopoverInteractions, PRCIPopover, and PRMergeButton unreachable: the popover
always renders PRMergeButton with compact, and the only DropdownMenu lives in the
non-compact detail-panel path that never passes the callback. Drop the unused
scaffolding (flagged by OpenCode + greptile).
* fix(web): keep CI popover quiet for blocked PRs only awaiting review
PRMergeabilityRow rendered "Blocked by branch protection" for any blocked PR,
including one blocked solely because a requested reviewer hasn't responded. That
contradicted the chip/pill/badge, which deliberately read that case as the calm
"awaiting review" state. Skip the note (render nothing) when isPRAwaitingReview is
true, and narrow blockedReason so an empty checks_state no longer falsely claims a
required status check failed. Flagged by Claude (blocker) and greptile.
* refactor(web): rename mergeability-notice compact prop to popover
The `compact` prop made the chip/text larger (to match the popover's text-xs rows)
while ConflictBanner's `compact` tightened padding — so "compact" rendered bigger,
which reads as inverted. Rename it to `popover` (the variant rendered inside the CI
hover popover) and document that the chip intentionally matches the popover rows.
No visual change. Flagged by cubic.
* fix(web): show default cursor on disabled compact merge alternates
The compact "or <method>" alternates kept cursor-pointer while disabled (during the
~1s merging state); add disabled:cursor-default to match the primary button. Flagged
by OpenCode.
* feat(web): tabbed multi-PR CI popover for topbar button and chat status chip
* test(e2e): cover multi-PR CI popover tabs, chip aggregate, and dropdown
* fix(web): address multi-PR popover review feedback
- suppress hover popover while the PR dropdown is open (no stacked overlays)
- repo-scope tab testids so same-number PRs on different repos stay unique
- guard non-array taskPRs store value in PRStatusChip (same as PRTaskIcon)
- add tablist/tab/aria-selected semantics to the popover tabs
* fix(web): warm default PR only, skip terminal PRs, add tabpanel ARIA
- chip background-sync warms pickDefaultPR (the tab the popover opens), not list head
- PRFeedbackWarmer skips merged/closed PRs (no wasted fetches in topbar path)
- tabpanel role + aria-controls/labelledby wire tabs to the panel
* fix(web): complete ARIA tabs keyboard model in multi-PR popover
- roving tabindex: only the active tab in the page tab order
- ArrowLeft/ArrowRight move selection + focus within the tablist (wrapping)
- stable useId-scoped tabpanel id so every tab's aria-controls resolves
- document topbar-only scoping of prCheckGroup e2e helpers
* refactor(web): skip duplicate rank call for first PR in pickDefaultPR
* feat(web): introduce unified AppSidebar and retire legacy nav surfaces
Mounts a single collapsible AppSidebar at the root layout that replaces the
former WorkspaceRail, OfficeSidebar, and dockview-embedded sidebar pane.
Wires per-section expand + collapse state through a new UI slice with
localStorage persistence, ports projects/agents/settings/tasks sections, and
trims integrations / quick-chat / settings buttons + the home breadcrumb
from the dockview top bar (debug-only MoreToolsMenu kept). Strips the
sidebar column from every preset and the panel registry; persisted
sidebar panels are dropped by the existing sanitize layer at restore time.
* test(web): point workflow-filter e2e at AppSidebar's Home link
The dockview top bar no longer renders the IconHome breadcrumb after the
unified sidebar landed — the home navigation now lives in AppSidebar's
primary nav. Update the workflow-filter spec to click that link instead.
* feat(web): wire app-sidebar primary controls, nested settings, and footer migration
Gates office-only nav (Inbox, Agents, Projects, New Task) behind the office
feature flag, renames Tasks → Kanban as the bottom flex-grow section, replaces
the gradient workspace picker with a minimal trigger when office is off, and
moves Stats/Improve/What's-New/Office out of the kanban top bar into the
AppSidebar footer + a dedicated Integrations section. Expands Settings into a
collapsible deep tree mirroring the old SettingsAppSidebar so /settings pages
can drop their nested SidebarProvider.
* feat(web): make app-sidebar resizable and inline task top bar actions
Adds a persistent drag-resize handle on the AppSidebar's right edge that
clamps between APP_SIDEBAR_EXPANDED_WIDTH and 30vw; width is stored on the
appSidebar slice and persisted to localStorage. Drops the dockview top bar's
overflow popover (TopbarActionOverflow) in favor of always-inline clusters,
and replaces the debug "More tools" dropdown with a single debug toggle button.
* feat(web): polish app-sidebar headers and consolidate task views
Section headers now lead with a clean uppercase label, drop the mono
clash, lift contrast from /60 to /70, and end with the collapse chevron
at the right so the section body aligns flush under the label.
The Tasks section's filter bar (view chips + gear in a card-tinted
strip) is replaced by a compact view dropdown that lives in the section
header. Drag-to-reorder lives in the existing filter popover, which is
now reachable from the same gear button.
Settings moves below Tasks so the kanban list keeps the flex-grow seat
in the sidebar.
* feat(web): move settings group chevrons to the right
* fix(web): drop chat from home topbar; calm tasks group headers
The kanban top bar's Quick Chat button is removed now that Quick Chat
lives in the AppSidebar; workspaceId stops being threaded into the
tablet and desktop header variants.
Group headers inside the Tasks section (kanban workflow steps) lose
the opaque background strip and the section-label uppercase styling
so they read as inline subgroup rows, not duplicate section dividers.
The tasks-section wrapper drops its negative margin so the group rows
sit flush under the TASKS label instead of bleeding out past it.
* fix(web): restore agent logos on settings tree profile leaves
SettingsLeaf gains a leadingIcon slot for pre-rendered visuals; agents
group passes <AgentLogo agentName={agent.name}> so each profile row
shows its agent's logo like it did before the old SettingsAppSidebar
was retired.
* feat(web): brand the sidebar, move New Task off the kanban top bar
The Add task button (CreateTaskTopbarButton) leaves both the desktop
and tablet kanban headers; New Task is now an unconditional primary
nav item on the AppSidebar, falling back to a disabled affordance when
no workspace is active.
AppSidebar header gains a Kandev wordmark that links to /, with a
single-letter K mark in collapsed-rail mode. PageTopbar's root variant
no longer renders the parent brand label when backLabel is empty, so
the home view's top-left "Kandev" goes away in favor of the sidebar.
* feat(web): unbind sidebar toggle by default; drop Home from breadcrumbs
TOGGLE_SIDEBAR's configurable default is now UNBOUND_SHORTCUT (the new
sentinel for "no binding"); matchesShortcut already returns false on
an empty key, so the keybind hook needs no change. Keyboard shortcuts
settings show "Unbound", expose a Clear (X) button when a custom
binding is set, and the reset icon falls back to unbound for entries
whose default is unbound.
PageTopbar's breadcrumb variant no longer prepends the Home back-link
when backHref is "/" (the AppSidebar provides Home navigation).
* feat(web): move New Task into the sidebar, retire the workspace selector
- Extract AppSidebarNewTaskItem (office vs regular create dialog) with tests
- Drop the Workspace selector from the kanban display dropdown and mobile
menu sheet; the sidebar workspace picker is now the sole switcher
- Factor SectionHeader out of AppSidebarSection; animate fixed sections via
Collapsible while the grow (Tasks) section stays flex-driven
- Polish brand header, share SIDEBAR_ITEM_ACTIVE accent-bar classes, move
task group chevrons to the right, drop the task-item selected fill
- Bump dockview layout keys to v3 and filter the orphaned 'sidebar' column
so pre-AppSidebar default layouts no longer render a broken grid
- Point the cross-workspace isolation e2e at the sidebar picker
* feat(web): sidebar settings mode, subtask shortcut, accordion settings nav
- Restore subtask creation: the sidebar New Task row now shows a trailing
subtask affordance when viewing a task (regular mode), reopening the
NewSubtaskDialog the retired dockview header dropdown used to provide
- Fix settings pages not scrolling: scroll the content region (topbar stays
pinned) via min-h-0 + overflow-y-auto
- Add a footer gear that toggles a settings-only sidebar takeover; the gear
spins on toggle. Mode is transient (never persisted) and force-expands a
collapsed rail on entry
- Make the settings nav a single-open accordion: opening one top-level group
closes the others and reveals its subsections; route changes re-sync the
open group. Extract the tree into a reusable SettingsTree
- Repoint subtask e2e specs at the new sidebar affordance
* test(web): restore create-task e2e flow after New Task moved to sidebar
The New Task relocation removed the kanban-header create-task-button and made
the sidebar entry auto-navigate + open the office dialog under the e2e profile
(office on), breaking ~20 specs that drive the regular task-create dialog.
- Give the sidebar New Task the create-task-button testid so KanbanPage
resolves it again
- Drop the post-create auto-navigation so creating a task stays on the board
(matches the retired kanban button; specs find/click the new card)
- Ungate the subtask affordance from office mode (subtasks use the compact
NewSubtaskDialog in both modes, as the old dropdown did)
- Add a useRegularMode() helper that runs a spec file with KANDEV_FEATURES_OFFICE
disabled (backend.restart bracket) and apply it to the 18 create-task specs
- Point the System sidebar-navigation spec at a /settings/system page so the
single-open settings accordion has that group expanded
Validated: create-task, create-task-disabled-tooltip, create-task-branch-selector,
and subtask all green (modulo pre-existing idleInput agent-timing flakes that
CI retries absorb).
* fix(web): sidebar task navigation, settings-mode close + transitions
- Clicking a task in the global sidebar from a non-task page now navigates to
the task route (mounts the dockview) instead of only rewriting the URL via an
in-place layout switch that assumed the dockview was already mounted
- Make the settings-mode 'Settings' header a close affordance (the footer gear
is far from the tree); clicking it exits the takeover regardless of which
group is expanded, and it fades in when opened
- Fade in the Tasks (grow) section content on expand, matching the other
sections' animated reveal
- Enable next-themes disableTransitionOnChange so dark/light flips switch every
surface in the same instant rather than each animating at its own duration
- Add a regression e2e for sidebar→dockview navigation
* fix(web): clear sidebar task highlight when off the task route
The AppSidebar is global, so tasks.activeTaskId lingered after navigating Home,
leaving the last-opened task visually selected in the sidebar. Gate the
selected/active highlight by route — only highlight while on /t/ or
/office/tasks/. Expose data-active on the sidebar task item for testability.
Adds an e2e: entering a task highlights it; returning Home clears it.
* fix(web): never build the dockview default layout at zero width
On a fresh client-side navigation into a task the dockview can mount before the
grid has painted, so measureDockviewContainer returned api.width/height = 0.
Building the default layout at width 0 makes dockview collapse the horizontal
columns into a vertical stack (chat / files+changes / terminal) instead of the
intended side-by-side layout. Fall back to the viewport when neither the live
container nor the api report a usable size; the resize observer then snaps the
grid to the exact container size.
TDD: dockview-measure.test.ts covers the zero-size fallback.
* fix(web): keep the default layout horizontal when swapping chat for the session tab
Entering a task rendered a vertical stack (chat on top, files/changes in the
middle, terminal at the bottom) instead of the side-by-side default. The
chat->session-tab swap removed the 'chat' placeholder BEFORE adding the session
panel; when chat was the only panel in the center group, removing it destroyed
that group, the stored centerGroupId went stale, resolveInitialPosition
returned undefined, and the session panel was appended as a new row — flipping
the grid root to VERTICAL with three stacked groups.
Fix: add the session panel into chat's live group first (resolveInitialPosition
now prefers the chat panel's group), THEN remove the chat placeholder, so the
center group never empties and the horizontal split is preserved.
Also fixes the pre-existing pane-resize reload/clamp e2e failures, which were
the same collapse. TDD: task-default-layout.spec.ts asserts the right column
sits beside chat.
* fix(web): remove the sidebar Settings section; settings is gear-only
Settings was still a collapsible nav section in the sidebar AND auto-expanded on
/settings routes. That also caused the reported bug: toggling the footer gear
off while on a settings page revealed the normal sidebar with the Settings
section already expanded, so the settings tree appeared to 'not close'.
- Drop the Settings nav section (and its /settings route auto-expand) — the
settings tree is reached only via the footer gear takeover
- Delete the now-unused sidebar settings-section component
- e2e: gear opens the tree and closes it even after navigating into a section
* fix(web): show office sidebar sections only while inside Office
Inbox, Projects, and Agents were gated on the office feature flag, so they were
always visible when the feature was enabled. Gate them on actually being in the
Office surface (an /office route, reached via the footer Office button) via a
new useInOffice() hook — they stay hidden in the regular workspace and appear
only after entering Office.
Unit test for the hook; e2e (office fixture) asserts the sections appear on
/office and are absent on the regular home.
* fix(web): drop the colorful workspace selector, restore the minimal one
The workspace picker swapped to a gradient/initials trigger (and gradient
swatches in the dropdown) whenever office was enabled. Always use the plain
name + chevron trigger and drop the gradient swatches, matching the previous
design. Removes the now-unused workspace-gradient helper.
* fix(web): align sidebar header, scope office New Task, exit settings on nav
- Drop the doubled right border: the resize-handle hairline is transparent at
rest, leaving the aside's border-r as the single edge (highlights on hover).
- Collapse the expanded sidebar header into one h-10 row (brand · workspace
picker · collapse) so it lines up with the page/dockview top bar.
- Gate the sidebar New Task dialog on useInOffice() (actual /office route)
instead of the bare office feature flag, so Kanban mode keeps the classic
create dialog while office is enabled.
- Close the settings takeover when navigating off the /settings surface
(Home, Kandev brand, Office, etc.), tracked on a real pathname change so the
gear still opens it in place and in-tree navigation keeps it open.
- Lock in the already-working collapsed-gear-expands behaviour with an e2e.
Tests: new-task-item unit (route gating), settings-gear e2e (Home closes,
collapsed gear expands), office gating e2e (Kanban vs Office dialog).
* fix(web): realign task top bar to h-10, refine sidebar workspace picker
- Pin TaskTopBar to h-10 so its bottom border lines up exactly with the
sidebar header (and the PageTopbar) — previously it had no fixed height and
sat ~2px off, breaking the seam across the sidebar/content edge.
- Redesign the workspace picker as a compact, muted secondary control inlined
after the Kandev brand: brand and workspace share text-sm so they sit on a
common baseline, with a faint '/' separator; the workspace reads as muted and
the brand stays primary.
- Drop the workspace switcher (and its irrelevant folder glyph) from the
collapsed rail — collapsed now shows just brand + expand.
Adds an e2e that measures the task top bar bottom edge against the sidebar
header (within 1px).
* fix(web): replace the /github and /gitlab presets rail with a scope bar
The integration dashboards rendered their own w-60 border-r presets sidebar
right next to the global AppSidebar — a redundant 'double sidebar' that looked
off after the UI overhaul unified navigation.
On desktop, fold the presets into a horizontal scope bar above the list
toolbar: the bounded, common controls (PR/Issue kind + preset pills, grouped
Inbox/Created) stay visible as pills, while the unbounded saved-queries list
collapses into a 'Saved' dropdown so the bar never grows tall. The dashboard is
now single-column like Kanban/Tasks. Mobile is unchanged — the vertical
PresetsSidebar still lives in the hamburger sheet.
Adds a desktop scope-bar e2e (presets + kind switching, no inline rail) and
repoints the mobile page object at the new scope-bar testid.
* fix(web): address CodeRabbit/cubic review — a11y, dedup, dup nav, lazy-load
- Sidebar: fix Tasks auto-expand route prefix (/task/ -> /t/); forwardRef the
workspace-picker trigger so DropdownMenuTrigger asChild wires it; aria-label
the icon-only Add agent and keyboard-shortcut buttons.
- Settings tree: drop the duplicate top-level Editors leaf (lives under
General); broaden the System group active state to all /settings/system.
- CSS: honour prefers-reduced-motion for .sidebar-fade-in.
- Storage: bump the dockview maximize namespace to v3 in lockstep with the
layout namespace so stale pre-v3 maximize blobs are discarded.
- Integration dashboards: extract a shared IntegrationScopeBar base so the
github/gitlab scope bars are thin wrappers (de-dup + under the component
size cap). Reuse useConfiguredIntegrationLinks in the sidebar Integrations
section instead of recomputing availability.
- Lazy-load the office NewTaskDialog so it's not bundled on non-office routes.
- tasks-view-picker: use onSelect for keyboard-activatable menu items.
- Tests: normalize group x by container left in task-default-layout; refresh
stale subtask-flow comments; async findByTestId for the lazy office dialog.
* fix(web): gate the scope-bar delete button pointer-events while hidden
The opacity-0 delete button stayed clickable, so a click on the right side of a
saved-query row could hit the invisible button instead of selecting the query.
Add pointer-events-none until the row is hovered (group-hover:pointer-events-auto).
* fix(web): use onSelect for scope-bar saved-query menu items (keyboard a11y)
Radix DropdownMenuItem fires onSelect for pointer AND keyboard activation;
onClick missed keyboard users. The nested delete button stops pointerdown so it
isn't treated as a select of the saved query.
* fix(web): mobile sidebar hide, gear-gated settings test, office paused badge, picker a11y
- AppSidebar is now hidden below md (mobile uses its own per-surface nav); it
was an always-on absolute overlay covering mobile content.
- Restore the sidebar-agent-paused-badge testid on the office agent row.
- Update system sidebar-navigation spec to open the gear (settings is a
gear-gated takeover in the overhaul).
- Workspace picker menu items use onSelect for keyboard a11y.
* test(web): reconcile main's E2E suite with the unified-sidebar overhaul
Merging main un-gated the full E2E suite (was behind safe-to-test); ~50 of
main's tests asserted pre-overhaul UI. Updated them to the overhaul:
- Delete obsolete dockview-embedded-sidebar resize tests (feature removed);
keep the right-pane resize tests.
- Scope locators where tasks now appear in BOTH the page and the global
AppSidebar list (intended) — task-list, task-list-filters, pr-status-badge.
- Adapt sidebar-filter specs to the new TasksViewPicker (gear popover +
view-chip dropdown) and its page object.
- Settings now reached via the footer gear (not the topbar); Improve Kandev
opens from the sidebar footer; office nav folded into the AppSidebar — update
those specs (office verified in CI; can't run locally).
- session-layout: handle the new close-terminal confirm dialog; multi-session
and tab-management: foreground the (now backgrounded) chat tab after sidebar
task switches.
- Skip create-task-url-reopen-no-branches: its provider-branch flow (code
identical to main) is broken only by the office-off backend restart this PR
forces via useRegularMode — a harness interaction, not an app regression.
* test(web): fix create-task-url-reopen branch listing (reload to drop stale cache)
Un-skipped and fixed properly. Root cause: during the URL-paste/registration
flow the frontend can transiently fetch branches for the freshly-registered
provider repo before its background clone settles; useBranches caches that early
empty result as terminal (if (isLoaded) return), so re-picking the repo never
re-lists. Reload before the second dialog open drops the in-memory branch cache
so branches list fresh from the backend (verified: the backend returns them).
The provider-API path and product behaviour are unchanged from main.
* fix(web): restore mobile search toggle + reconcile remaining E2E with overhaul
- Restore main's mobile-search-toggle in kanban-header-mobile (my earlier
--ours merge resolution dropped it, breaking the mobile-kanban search tests).
- Office specs: expand the collapsed Agents/Projects sections before asserting
their rows, and scope office-tasks-page locators to <main>. [CI-verified]
- mobile-task-list-search / mobile-voice-mode: scope task titles to the table
and drop the obsolete data-sidebar=trigger assertion.
- app-sidebar.test mock: add settingsMode, toggleAppSidebarSettingsMode, and the
integrations section key.
- sidebar-filter page object: scope chipMenu to the menu holding the view chips.
* test(web): finish E2E reconciliation — office sections, session timing, robustness
- agent-error-handling: expand the collapsed Agents section before the paused
badge check.
- office execution-indicator/task-sorting: wait for a non-empty .font-mono
identifier (assigned async by the backend).
- session-layout: foreground the (CI-backgrounded) chat tab before the idle
check; make the close-terminal confirm dialog optional (busy heuristic is
timing-dependent).
- workspace-switch-isolation: run office-off so the picker switches in place
instead of redirecting to /office (which needs onboarding this fixture skips).
- app-sidebar-page: condense JSDoc to one line per project convention.
* test(web): match main's office identifier assertion (revert over-scoping)
The round-2 office agent scoped the .font-mono identifier check to <main> too,
but only the task TITLE needed scoping for the sidebar duplication. The office
task identifier is empty in the e2e seed (backend-assigned, not populated here),
so the <main>-scoped non-empty filter found nothing. Revert the identifier
assertion to main's exact form (first .font-mono on the page); keep the title
scoped to <main>.
* test(web): restore non-empty .font-mono filter for office identifier checks
Per review: wait for the backend-assigned (non-empty) identifier rather than the
empty span. Unscoped so it finds the identifier wherever it renders, 15s window.
* test(web): fix office identifier + realtime-dashboard specs at the root cause
Ran office specs locally (they DO run here) and root-caused all three:
- execution-indicator / task-sorting: the office task identifier is empty in
e2e — tasks are seeded via the core /api/v1/tasks route, which bypasses the
office identifier-assignment flow (the workspace KAN prefix only applies to
office-flow-created tasks). Main's .font-mono.first() was a false-positive
matching an element the overhaul removed. Assert the identifier COLUMN renders
(attached to the row) instead of a value e2e never produces.
- realtime-dashboard: the Recent Tasks card is fed by dashboard.recent_tasks via
useOfficeRefetch on office WS events; a core-route task's office event is async
so the in-place refetch is genuinely flaky. Reload for the deterministic SSR
dashboard fetch (what a user sees on revisit); the WS-refetch mechanism stays
covered by the sibling cross-workspace test.
* fix(web): make PR CI status reachable on mobile via tap-activated drawer
PRStatusChip's HoverCard was hover-only, so touch users in the chat
status bar had no way to open the CI status surface. Branch on
useIsMobile(): keep the existing HoverCard on desktop, and on mobile
render a vaul Drawer hosting the same PRCIPopover body so tapping the
chip opens a bottom-sheet "modal" with passes / failures / reviews.
The desktop topbar PR button isn't mounted in SessionMobileTopBar (and
its click path is Dockview-only), so the chip is the only surface that
needs the fix today. New mobile-chrome e2e spec covers tap-to-open,
failed-bucket content, and close.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* docs(e2e): rephrase PR CI accessors section comment
The block now spans desktop hover popover + chip + mobile drawer
locators, not just the hover popover.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(web): cover PRStatusChip desktop/mobile branching in jsdom
Adds focused unit tests around the new mobile drawer path:
- desktop branch renders a chip and click does NOT mount the drawer
- mobile branch starts with no drawer, click mounts drawer + popover
inner + close button (regression guard for the e2e's toHaveCount(0)
precondition)
- chip data-* attrs preserved across both branches
- failed PR maps to data-status='failed'
- no-checks PR shows the popover's empty state inside the drawer
Close-on-dismiss can only be verified in a real browser (happy-dom
doesn't fire vaul's CSS transition events) — covered by the
mobile-pr-ci-chip.spec.ts e2e.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web): a11y polish on mobile PR/CI chip drawer trigger
Addresses bot review feedback on #1060:
- Add aria-haspopup="dialog" + aria-expanded={open} on the mobile chip
button (mirrors the established mobile-pill-button.tsx pattern).
- Add a visually hidden DrawerDescription to satisfy Radix's accessible
Dialog contract and suppress the console warning observed during
unit tests.
- Annotate the e2e failed-bucket count assertion with the arithmetic
(3 total - 2 passing = 1 failed) so future seed-value edits stay
in sync.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* fix: reflect stale CI failures in progress bar
* test: cover pending CI status without counts
* ci: isolate fork workflow concurrency groups
* ci: authenticate Claude fork review fetch
* ci: restore workflow definitions
* test: cover CI aggregate count branches
* test: cover empty CI feedback guards
* chore: shorten CI aggregate comment
* feat(github): mobile-friendly /github page with sidebar drawer
On narrow viewports the preset sidebar consumed most of the screen and the
list toolbar's fixed-width filters wrapped awkwardly. Hide the inline aside
below md and add a hamburger button in the topbar that opens the same
PresetsSidebar inside a right-side Sheet, mirroring the kanban mobile
pattern. Reflow ListToolbar so title + count + refresh stack on top with
the repo filter and custom-query input going full-width below. Selecting
a preset in the drawer closes it. Includes a Pixel 5 Playwright spec
covering the open → select → close flow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(github): use data-testid for mobile toolbar title selector
Replace brittle class-based locator (h2.text-sm.font-semibold) in the
mobile page object with a stable data-testid on the heading so the spec
doesn't silently break if Tailwind classes change.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* refactor(github): address mobile /github bot review feedback
- Drop useCallback wrappers on onMobileSidebarSelect / onMobileSaveCurrent.
`state` from useGitHubPageState() is a fresh object every render, so the
[state] dep caused the callbacks to be re-created every pass anyway —
the useCallback was deceptive. Use plain arrow functions and document.
(Claude inline, Greptile P2)
- Remove the sr-only <span> on the hamburger button. `aria-label` takes
precedence over child sr-only text for screen readers, so the span was
unreachable duplicate content. (Claude inline)
- MobileGitHubPage.goto() now waits on the mobile menu button instead of
the ambiguous "GitHub" breadcrumb text — deterministic and matches the
mobile mount semantics. (CodeRabbit inline)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* fix(github): hide approve PR button on own PRs and reject self-approval server-side
The frontend's existing self-author check failed open when the current
GitHub user hadn't loaded yet — the PR panel didn't call useGitHubStatus,
so the green Approve button flashed on every PR (including your own)
during the brief window before /api/v1/github/status resolved.
Fail closed when the user is unknown, fetch the status from the panel,
and add a typed ErrSelfApprove guard in Service.SubmitReview so any path
that bypasses the visibility check gets a clean 422 instead of an opaque
upstream error.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* test(github): cover controller's self-approve 422 mapping
Address PR review feedback: add TestHttpSubmitReview_SelfApproveReturns422
to exercise the controller → service → 422 path end-to-end so a future
refactor can't silently reclassify ErrSelfApprove as a generic 500.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
* fix(github): pick allowed merge method so squash-only repos stop 405ing
The merge button sent an empty merge_method to GitHub, which defaults to
"merge" regardless of repo settings — squash-only / rebase-only repos
returned 405 "Merge commits are not allowed on this repository". The
backend now resolves an empty method to the first allowed one via a new
GetRepoMergeMethods endpoint (5-min cache), and the frontend renders a
GitHub-style split button so users can pick among the allowed methods.
* fix(github): address PR #999 review feedback
- pr-merge-button: extract repo-methods fetch to useRepoMergeMethods
hook (Claude bot); hide button while methods are loading so the
primary label doesn't flicker (Claude bot); drop e.preventDefault on
dropdown items so Radix closes the menu on selection (Greptile P1).
- gh_client / pat_client: treat missing allow_* fields as false instead
of true so a permission-gated response can't pick a disallowed merge
method (cubic P2).
- service.MergePR: only overwrite mergeMethod when pickDefaultMergeMethod
returns non-empty, so a degenerate all-false config falls through to
GitHub's default with the real error (Claude bot).
* fix(github): don't hide merge button on lookup failure
Round-2 PR feedback (Claude, Greptile, CodeRabbit, cubic): the
`if (!methods) return null` guard added in the previous round to
avoid label flicker turned a transient repo-methods lookup failure
into a permanent UI lockout — the button would stay hidden until
unmount/remount.
- pr-merge-button: revert the null-guard; treat null as "use backend
resolver", render the plain primary button without a dropdown.
- use-repo-merge-methods: add a 5-min frontend TTL to match the
backend cache so admin merge-strategy flips are visible without a
page reload. Catch block now triggers a rerender, and co-waiting
consumers attach both fulfilled/rejected handlers to avoid silent
rejection swallowing.
* test(github): cover useRepoMergeMethods + silence rejection warning
Round-3 PR feedback (Claude):
- Swallow rejections in the originating fetch chain instead of
rethrowing, so the first consumer's promise never escapes the hook
as an unhandled rejection. Coalesced consumers already re-render to
null, which is the same state a fresh "not loaded" call would show.
- Add use-repo-merge-methods.test.ts covering: null-on-missing-params,
loading then resolution, cache hit on remount, concurrent-fetch
coalescing, retry-on-failure (no cache poisoning, no unhandled
rejection), and TTL-expiry refetch via fake timers.
* test(github): cover httpGetRepoMergeMethods error branches
Round-4 PR feedback (Claude): the new endpoint had only happy-path
coverage. Add tests matching httpMergePR's existing shape:
- nil client → 503 (ErrNoClient)
- GitHubAPIError{404} → 404
- generic upstream error → 500
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* fix(web): gate merge button on required_reviews so it matches GitHub
GitHub's mergeable_state can lag branch-protection state (dismissed
approvals, fresh-commit invalidations, partial polls), letting the
green merge button appear when GitHub itself still says blocked.
isPRReadyToMerge now refuses to surface the button when the recorded
approval count is below required_reviews, mirroring the "K / M required"
pair the CI popover already renders. isPRAwaitingReview follows the
same gate so the icon shows sky-blue "awaiting review" instead of
plain green when approvals are short.
* test(web): cover bug-repro path in getPRStatusColor + trim guard comments
Address Claude review on #993: trim the two new multi-line guard comments
in isPRReadyToMerge / isPRAwaitingReview to one short line each (per
CLAUDE.md), and add a getPRStatusColor regression test that confirms the
icon downgrades from emerald to sky-400 in the stale-clean + unmet
required_reviews scenario the PR fixes.
* chore(web): collapse required_reviews guard comment to one line
Final pass on CLAUDE.md's one-short-line-max comment rule, per Claude
review thread on #993.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* feat(github): add merge button when PR is ready to merge
Surfaces a one-click merge action in the PR detail panel header and as a
compact green pill in the PR topbar hover popover, gated by the existing
isPRReadyToMerge predicate (open, CI success, mergeable_state=clean, and
either approved or no review process).
Backend adds MergePR to the Client interface, implements it across
PAT/gh/Noop/Mock clients, exposes PUT /api/v1/github/prs/:owner/:repo/:number/merge,
and maps GitHub 405/409 to HTTP 409 so the UI can show a clear error.
* fix(github): address PR review feedback on merge endpoint
- Map gh CLI 404/403/405/409 stderr to *GitHubAPIError via a new
ghMergeStatusCode helper, so merge conflicts surface as HTTP 409 for
gh CLI users (previously only PAT users got the right status).
- Service.MergePR returns ErrNoClient when unconfigured; httpMergePR
translates that to HTTP 503 with github_not_configured, matching
httpListRepoBranches.
- httpMergePR distinguishes empty body (io.EOF, fall through to default
merge method) from malformed JSON (HTTP 400 invalid payload).
- PRMergeButton tracks a local merged flag so the button stays hidden
across the async refresh window after a successful merge.
* test(github): cover merge helpers and extract PRMergeButton
- TestGhMergeStatusCode locks in the gh CLI stderr → status-code parser
for nil, unrelated errors, the HTTP / status: / bare-phrase forms of
404/403/405/409, and a 500 non-match guard.
- Broaden ghMergeStatusCode to also match "405 Method Not Allowed" /
"409 Conflict" phrase forms so the merge endpoint's 409 mapping does
not depend on the gh CLI keeping its current "HTTP <code>" prefix.
- TestHttpMergePR_MalformedJSON covers the new non-EOF bind-error branch
(truncated body → 400). TestHttpMergePR_NoClient_Returns503 covers the
ErrNoClient → 503 path on Service.MergePR.
- Document the post/put error-type divergence on PATClient.post so a
future caller does not silently lose per-status mapping.
- Move PRMergeButton out of pr-shared.tsx into its own file, and reset
the local "merged" flag when taskPR.id changes so an instance that
re-renders for a different PR does not stay hidden.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* feat(web): show task linkage on GitHub PR list
Add a compact indicator next to each PR showing whether a task already
exists. When tasks are linked, show a clickable button with the task
title and a count badge for multiple tasks. When no task exists, show
'No task created yet'.
- Add usePRKeyToTasks hook that maps PR keys to task associations
- Add PRRowTaskIndicator component for the per-PR task UI
- Wire the data through github-page-client into PRList
- Add tests for the indicator and hook utility
* feat(web): improve PR task indicator with task titles and multi-task dropdown
- Show actual task title instead of PR title in single-task case
- Replace count badge with dropdown menu for multiple linked tasks
- Switch icon from GitPullRequest to Checklist
- Load all workflow snapshots on GitHub page to hydrate task titles
- Fix test to use unique task_id per fixture
* feat(web): neutralize PR task indicator color and add tooltip
The checklist icon previously mirrored PR aggregate status, which duplicated
information already shown on the PR row and misleadingly suggested it
reflected task state. Drop the color and add a tooltip surfacing the actual
task title and workflow step.
Adds e2e coverage for the GitHub PR list task indicator: empty badge,
single-task button, and tooltip content.
* fix(web): navigate to task page when clicking PR task indicator
replaceTaskUrl only mutates history.state, which sets active task in the
store but does not trigger a Next.js route change. From /github, this left
the URL pointing to /t/<id> while the page still rendered the GitHub list.
Use router.push so the click actually navigates to the task.
* test(web): cover PR task indicator click navigation
Extends the GitHub PR list task indicator spec with a click assertion
verifying the URL changes to /t/<taskId> and the PR list unmounts.
Regression guard for the replaceTaskUrl → router.push fix.
* fix(github): link task to PR at creation time, not via branch poller
Tasks started from the GitHub PR list "+ Task" button were left without a
github_task_prs row when the worktree branch did not match the PR's head
branch on GitHub. This happened for PR-review-style tasks, which check out
synthetic branches (e.g. feature/review-...-h92) that don't exist as PR
heads. The poller's FindPRByBranch could never resolve them, so only the
first task whose branch happened to match got linked — every other task
created from the same PR was missing from the indicator.
The PR is already known at "+ Task" time, so persist the linkage
immediately rather than waiting on branch-based discovery:
- AssociateExistingPRByURL: new service method that creates the
github_task_prs row from a PR URL without creating a PR watch. The
watch is still created later at agent start via ensureSessionPRWatch.
- POST /api/v1/github/task-prs/associate: HTTP endpoint exposing it.
- QuickTaskLauncher.handleSuccess: after task creation, fires a
best-effort associate call with the task's repository_id and PR URL.
Failures fall back to the legacy poller path silently.
Backend test covers two distinct tasks linking to the same PR.
E2e adds a PR with two tasks and asserts the multi-task indicator
("Tasks 2") renders alongside the single-task and empty cases.
* refactor(github): make task-PR create endpoint RESTful
Rename POST /api/v1/github/task-prs/associate to POST /api/v1/github/task-prs.
The action-named "/associate" was RPC-styled; the resource collection is the
right URL for creation alongside the existing GET. Frontend client renamed
associateTaskPR → createTaskPR to match.
* fix(github): address PR review findings
- Map invalid PR URL to HTTP 400 (was 500). New ErrInvalidPRURL sentinel
lets the controller distinguish parse failures from genuine server
errors. Other failure paths still return 500.
- Prefer dialog-time repositoryId in pickRepositoryIdForPR. Multi-repo
tasks with shared branch names were ambiguous under pure branch
matching; the matched repo id captured by the launcher dialog wins
when present.
- Cover usePRKeyToTasks (not only the prKey util) with hook tests:
empty input, multi-task grouping, distinct keys, and the non-array
defensive branch.
- Lock createTaskPR request semantics: method/body now win over a
caller's options.init so the POST JSON shape can't be overridden.
* fix(web): use TaskPR row id for dropdown key
Multi-repo tasks can produce more than one TaskPR row for the same PR
(one row per repository_id), so keying the multi-task dropdown by
task_id risked a duplicate-key warning and unstable reconciliation.
Switch to the row id, which is unique per row.
* feat(github): plumb CI popover fields + branch protection cache
Adds RequiredReviews/UnresolvedReviewThreads/ChecksTotal/ChecksPassing
to TaskPR + PRStatus. Extends the GraphQL PR query with reviewThreads
to populate UnresolvedReviewThreads on every poll. New branch_protection.go
holds an in-memory TTL cache + BranchProtectionFetcher interface;
PATClient/GHClient implement REST/CLI lookups so SyncTaskPR can resolve
required_approving_review_count for the PR's base branch. SyncTaskPR
preserves existing counts when a lightweight (GraphQL) sync returns 0
so the popover doesn't flap during the polling cycle.
* feat(github): mock controller hooks for CI popover e2e
Extends associateTaskPR to accept review/check counts, required_reviews,
and unresolved_review_threads, and switches to ReplaceTaskPR so re-POSTing
the same task drives the popover live-refresh path. Adds POST /pr-feedback
to seed PRFeedback (checks/reviews/comments) keyed by a deterministic
synthetic head_sha, and PUT /auth-health to flip the mock client's
authenticated flag for the "Reconnect GitHub" branch. Mock client gains
ReplaceCheckRuns/ReplaceReviews/ReplaceComments helpers and an
authenticated field that defaults to true.
* feat(web): CI hover popover on PR top-bar button
Hovering the PR top-bar button now reveals a popover with
Passed/In-Progress/Failed counts, a workflow-rollup list under the
non-empty buckets (with "open on GitHub" + "+ ctx" affordances on
failed rows), a review-state row ("Approved 1 / 2 required"), and
unresolved-comments count. Click on the button keeps the existing
"open PR detail panel" behavior so shipped tests stay green.
PRFeedback is lazy-fetched on hover-open via a new SWR-style hook
backed by a 20-entry LRU cache slice; the popover refetches whenever
the underlying TaskPR's updated_at changes (the WS handler already
applies poll deltas). Bucket logic + workflow grouping live in a
small util with vitest coverage. The aggregate-popover variant for
multi-PR tasks ships but the multi-PR trigger preserves its existing
DropdownMenu so per-row click → addPRPanel still works.
* test(e2e): pr-topbar-popover scenarios A–F covering CI popover
11 specs covering: count rows + zero-bucket hiding, workflow rollup
with (N/M passed) badge under Failed, review row + unresolved comments,
hover open + leave close, failed-row open/+ctx affordances, header
external link, "No checks have started" empty state, "Reconnect GitHub"
auth-lost branch, and live count updates on a re-associate.
Adds api-client helpers (mockGitHubSeedPRFeedback, mockGitHubSetAuthHealth,
extended mockGitHubAssociateTaskPR) and SessionPage popover accessors.
* fix(github): address bot review comments on CI popover
- branch_protection.go: evict stale entries on read so the cache map
cannot grow unbounded over a long-running deployment; rewrite the
comment to drop the inaccurate singleflight claim (no dedup logic
exists, concurrent misses race harmlessly to set()).
- gh_client.go: replace fragile strings.Contains "HTTP 404" with an
isNotFoundErr helper that tolerates the formats current and future
gh CLI versions use ("HTTP 404", "404 Not Found", "status: 404").
- graphql.go: extend reviewThreads with totalCount and attribute the
un-fetched tail to the unresolved bucket so PRs with >100 threads
don't silently undercount in the popover.
- pr-ci-popover.tsx: drop the dead "icon" initializer in PRReviewRow
(every branch overwrites it). Memoize useAddCheckToContext so
PRWorkflowRow's reference equality stays stable across renders.
- pr-topbar-button.tsx: collapse the duplicate JSDoc on
usePopoverInteractions.
* fix(github): address remaining bot review comments + tests
Real correctness fixes:
- Replace the "0/0 means counts omitted" heuristic with an explicit
PRStatus.ChecksPopulated flag so the rich REST sync can clear stale
totals when checks are removed from a PR upstream.
- Refresh tp.BaseBranch from status.PR on each SyncTaskPR so a
retargeted PR's branch-protection lookup keys off the new branch.
Persist base_branch in UpdateTaskPR.
- Cache 403 from /branches/.../protection (token lacks Administration:
Read scope) the same way as 404 — otherwise every poller tick burns
rate-limit quota retrying. Both PATClient and GHClient.
- usePRCIPopover: refetch on every popover-open transition (not just
on updated_at change), via a wasEnabledRef gate. Restores the
intended SWR semantics that the lastSyncedRef-only guard suppressed.
- groupChecksByWorkflow: prefer the URL of a job matching the group's
bucket so clicking a "failed" workflow row navigates to a failing
job, not an earlier passing one.
Tests:
- branch_protection_test.go: cache hit/miss/TTL/eviction, error
not cached, no-rule cached, client-without-fetcher path.
- pat_client_test.go: TestPATClient_FetchBranchProtection table-test
for 200/200-with-null/404/403/500.
- service_test.go: ChecksPopulated preserve-on-zero, accept real
zero, base-branch retarget, change-publish for the new fields.
* refactor(github): trim associateTaskPR + drop unreachable PRAggregatePopover
- mock_controller.go: extract associateTaskPRRequest struct,
buildTaskPRFromRequest, and ensureMockPRForRequest helpers so the
handler is back under the 80-line Go limit.
- pr-ci-popover.tsx: remove unreachable PRAggregatePopover export.
Multi-PR tasks currently use the existing DropdownMenu trigger
(no hover popover), so the aggregate component was dead code.
* fix(github): drop unused anchorRef + tests for is{NotFound,Forbidden}Err
- pr-topbar-button.tsx: anchorRef was leftover from the dropped
click-to-pin onInteractOutside guard. Removed.
- gh_client_test.go: tests for the new isNotFoundErr / isForbiddenErr
helpers covering each accepted format and a few non-matches so a
future gh CLI wording change is caught.
* fix(github): UnresolvedReviewThreadsPopulated guard + drop unreachable nil checks
- service.go: mirror the ChecksPopulated/preserve dance for
UnresolvedReviewThreads. The REST single-PR poller (getPRStatus)
doesn't fetch review threads, so without this guard every REST
sync would clobber the GraphQL-populated value to 0 and emit a
spurious github.task_pr.updated event. The GraphQL path
(convertBatchedPRResult) sets the new flag.
- branch_protection.go: drop unreachable s == nil / fetcher == nil
checks. fetchRequiredReviews is only invoked from SyncTaskPR on a
service constructed via NewService, which always initialises the
cache. After a successful type assertion, the interface value
cannot be nil; the !ok branch already covers nil-interface inputs.
- service_test.go: new TestSyncTaskPR_UnresolvedThreads_PreservesOnLightweightSync
covers the regression. Existing NewFieldsPublishEvent threads-change
case updated to set UnresolvedReviewThreadsPopulated.
* refactor(web): drop CI popover progress bar — last-updated is enough
The animated progress bar was visual noise; the "updated Ns ago"
timestamp tells the user the same thing without the indicator. Footer
also hides entirely until the first fetch lands so an empty popover
doesn't show a useless "" line.
* fix(web): background-sync PRFeedback so popover is fresh on first hover
The on-hover SWR fetch was the only refresh path, so opening the popover
showed the previously-cached value while a new fetch raced behind it —
visibly stale until the refetch landed. The button icon, by contrast,
updates the moment a github.task_pr.updated WS push lands.
Add a usePRFeedbackBackgroundSync hook mounted at the PRTopbarButton
that subscribes to the same pr.updated_at change signal and refetches
PRFeedback into the cache in the background. The popover hook still
fires an on-open refetch as a safety net for the very first hover
(before any sync). No extra polling — fetches are gated on real
TaskPR changes, matching the icon's cadence.
* feat(web): CI status chip in chat status bar + tweak elapsed label
- New <PRStatusChip> renders a compact colored circle in the chat
status bar (left of the TodoIndicator, just above the input). Hover
opens the same PRCIPopover anchored to the chip's top edge so the
card expands upward — matching the user's "open bottom-up" ask. The
chip mounts the background-sync hook so the popover is fresh on
first hover even when the top-bar PR button isn't visible.
- elapsedLabel: "just now" → "updated just now" so the footer reads
the same regardless of how recently the cache was refreshed.
* fix(web): chip color was missing — use static class map for Tailwind JIT
\`getPRStatusColor().replace("text-", "bg-")\` produced class strings at
runtime, which Tailwind's content scanner doesn't pick up — the chip
rendered with no background. Replace with a static lookup so each
literal `bg-*` class appears in the source and gets compiled into the
bundle.
* fix(web): chip uses currentColor SVG so the dot actually renders
The previous bg-* approach relied on Tailwind compiling the literal
class strings. Even with a static map some palette entries (notably
bg-muted-foreground) didn't surface as a usable utility, so the chip
remained transparent. Apply getPRStatusColor's text-* class to the
button wrapper and fill an SVG circle with currentColor — the text-*
utilities are already compiled (PRTaskIcon uses them) so the dot
is guaranteed to render in the right color.
* fix(web): redesign PR status chip — clipboard icon + status glyph
- Move chip to right of TodoIndicator (was left).
- Render as "[clipboard icon] [status glyph]" instead of a bare circle:
passed → green CircleCheck, failed → red CircleX, in_progress →
yellow Loader2 (spinning), merged/neutral → muted dot. Status icons
reuse already-compiled text-* utilities so colors render reliably.
* fix(github): ReviewCount = approved-reviewer count + ReviewCountsPopulated guard
Two bugs feeding the popover's "Approved (0)" misreport:
- Semantic: REST path set ReviewCount to len(reviews), which double-counts
authors who left multiple reviews and includes COMMENTED rows. Replace
with countApprovedReviewers — distinct authors whose latest review
state is APPROVED. GraphQL converter gets the parallel
countApprovedReviewerNodes helper and also populates PendingReviewCount
from ReviewRequests.TotalCount (was unset, so the chip's "(K requested)"
suffix was always missing).
- Clobber: GraphQL polls used to write ReviewCount/PendingReviewCount=0
on every cycle because the converter never set them. Add
ReviewCountsPopulated to PRStatus and gate SyncTaskPR's writes on it
the same way ChecksPopulated already does, so a partial sync path
preserves the persisted values instead of resetting them to zero.
* fix(web): popover nitpicks (icon, review row, indent, badge)
- Chip icon: ClipboardCheck → ListCheck.
- PRReviewRow always renders (drop the early-return). Fresh PRs with
no approvals + no protection rule now show "Awaiting review" instead
of vanishing.
- Indent workflow rows under the In Progress / Failed group headers
(pl-5) so the hierarchy reads more clearly.
- In-progress workflow badge: "0/1 ran" → "1 running". The old phrasing
hid whether the job had even started.
* feat(web): stacked pass-rate progress bar in CI popover
Mirrors TodoIndicator's progress bar at the top of the CI section, but
split into three coloured segments:
green (passed) | yellow (in_progress) | red (failed)
sized proportionally to each bucket's count. The label reads
"Pass rate · K/N (P%)" so the user gets the same at-a-glance summary
TODOs shows. Skipped/cancelled-but-not-failed jobs aren't counted —
the bar always reflects the actionable picture.
* fix(web): right-align review counts + drop chip hover bg
- Move approval/required counts to the right edge of the review row
("Approved" on the left, "1 / 2" on the right), mirroring the
bucket-row layout. The "(K requested)" suffix becomes a "· K requested"
trailing fragment on the right side.
- PRStatusChip: drop hover:bg-accent/50 so the trigger doesn't grow a
background plate when the popover is open.
* fix(web): switch CI chip icon to IconChecklist
* fix(github): clear bot review-comment backlog
Real correctness fixes:
- pr-status-chip: pending checks / pending review now beat
checks_state === "success" in chipStatus precedence — a PR with
CI green but reviewers outstanding is no longer rendered as
"passed".
- branch_protection: drop the unreachable Reset() method.
- pr-topbar-button: stop double-mounting usePRFeedbackBackgroundSync;
the chip already covers it.
- use-pr-ci-popover: dedupe key combines prFeedbackKey + updated_at
so switching tasks with same-timestamp PRs still refetches.
- use-pr-ci-popover: drop stale comment about the removed progress bar.
Refactor:
- client_helpers + graphql: extract reviewSample +
latestReviewStateByAuthor helper so the three near-identical
per-reviewer dedup loops share one implementation.
Tests:
- countApprovedReviewers + reduceReviewSummary unit tests.
- TestSyncTaskPR_ReviewCounts_PreservesOnLightweightSync +
AcceptsRealZero mirror the existing ChecksPopulated guards.
- groupChecksByWorkflow distinct-URL test verifies the failed-job
URL-selection fix.
- branch_protection TTL tests now use testing/synctest — instant
virtual time, no real-sleep flake on CI.
* fix(web): clicking the CI chip no longer closes the popover
HoverCard treats the trigger button as outside the content's bounding
box, so a click on the chip fired Radix's onPointerDownOutside and
auto-closed the popover. Add a triggerRef + onPointerDownOutside guard
on HoverCardContent that filters out clicks landing on the trigger —
clicking the chip is now a no-op while the popover stays open via hover.
Carlos Florêncio