* fix(backend): return mcp message_task once dispatched, not after target turn ends
The MCP message_task_kandev tool was synchronously waiting for the target
session's entire turn to complete before returning, even though its
description advertises a fast dispatch status. For idle target sessions,
the call would hang for the full duration of the agent's response (with
no upper bound — waitForPromptDone has no timeout).
Threads a dispatchOnly flag from the MCP handler down through
PromptTask → executor.Prompt → PromptAgent → SendPrompt. When set,
SendPrompt returns once agentctl.Prompt accepts the prompt instead of
blocking on the agent's complete event. Stale completion signals from
prior dispatch-only prompts are drained at the start of SendPrompt so
they don't poison the next waiting call.
* fix: address PR review feedback
- Replace time.Sleep with channel-based wait for WS connection in new
SendPrompt tests, per CLAUDE.md (channel sync over time.Sleep for
non-subprocess tests).
- Drop redundant Warn that logged the remapped sentinel after the
original error was already logged by the preceding Warn.
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
* feat(backend): key user shells by TaskEnvironmentID
Sessions in the same task share a TaskEnvironment. Re-key the user shell
runner so terminals are scoped per env, not per session — switching between
sessions of the same task now sees the same shell list.
- Add TaskEnvironmentID to AgentExecution / LaunchRequest / ExecutorCreateRequest
/ executor.LaunchAgentRequest, propagated through ToAgentExecution and the
orchestrator launch path.
- Add Manager.ResolveScopeKey(sessionID) — returns env when execution carries
it, falls back to sessionID for legacy paths.
- Rename runner param sessionID -> scopeID in interactive_shells.go; map keys
are now scopeID:terminalID.
- Shell handlers + WS terminal handler resolve sid -> scopeID via
ResolveScopeKey before calling the runner.
* feat(web): key dockview layout + portals to TaskEnvironmentID
Switching between sessions of the same task no longer rebuilds the dockview
layout — terminals and panels persist because layouts are env-scoped, not
session-scoped. The bottom terminal also reuses a stable sessionId across
same-env switches so it doesn't reconnect to a different shell.
- Rename layout persistence: setSessionLayout/getSessionLayout/*SessionMaximizeState
-> setEnvLayout/getEnvLayout/*EnvMaximizeState (kandev.dockview.env-layout. prefix).
- Rename dockview-session-switch.ts -> dockview-env-switch.ts; performSessionSwitch
-> performEnvSwitch with oldEnvId/newEnvId/activeSessionId.
- dockview-store.ts: currentLayoutSessionId -> currentLayoutEnvId; switchSessionLayout
-> switchEnvLayout(oldEnvId, newEnvId, activeSessionId). Same-env switches no-op.
Drop _skipLayoutSwitchForSession + consumeSkipFlag — env-keyed action handles it
structurally.
- panel-portal-manager: PortalEntry.envId; releaseBySession -> releaseByEnv.
ENV_SCOPED_COMPONENTS in dockview-desktop-layout (renamed from SESSION_SCOPED).
- useEnvSwitchCleanup replaces useSessionSwitchCleanup; tracks env changes only.
- All performLayoutSwitch callers (sidebar, dropdown, header, dialog) resolve
sid -> envId via environmentIdBySessionId before switching.
- bottom-terminal-panel: drop sessionId prop, use useEnvironmentSessionId().
- cleanupTaskStorage now takes envIds[] alongside sessionIds[] for env-scoped
layout/maximize cleanup.
* test: add coverage for env-keyed terminals + layout
Playwright e2e (terminal-env-keyed.spec.ts) — switching between sessions of
the same task keeps terminal scrollback intact and asserts both sessions
share one task_environment_id. Update the comment in
sessionless-task-switch.spec.ts to reference performEnvSwitch.
* fix: address env layout PR feedback
* test: fix flaky handshake auth check
* fix: address env scope review findings
* feat(orchestrator): reuse existing same-profile session on workflow step switch
When a workflow step transition needs a different agent profile, look up
an existing session on the same task that already uses the target profile
and promote it back to primary instead of creating a fresh one. Reuses
COMPLETED and FAILED sessions (CANCELLED stays excluded — explicit user
stops shouldn't be auto-revived).
Backend (event_handlers_workflow.go):
- findReusableSessionForProfile: most recently updated session matching
the target profile, skipping CANCELLED.
- reuseSessionForStep: promotes the session to primary; if terminal,
revives via reviveReusedSession.
- reviveReusedSession: distinguishes "previously launched" (has
executors_running record -> flip to WAITING_FOR_INPUT, lazy-resume via
ResumeSession with stored token) from "never launched" (no record ->
flip to CREATED so autoStartStepPrompt routes through
StartCreatedSession for a full fresh launch). Clears stale
ErrorMessage/CompletedAt so the UI stops surfacing prior failures.
- createNewSessionForStep + completeAndStopSession: shared helpers.
Backend (task_operations.go):
- StartCreatedSession no longer calls processOnTurnStartViaEngine.
User-initiated messages already fire on_turn_start in
dispatchPromptAsync. Workflow-driven auto-start prompts arrived
because the workflow just transitioned us into this step via
on_turn_complete; firing on_turn_start again cascades the workflow
back out and the redirect-to-active-session logic delivers the prompt
to the wrong session's agent.
Frontend (web):
- task.updated handler follows focus to the new primary when the user
is viewing the task and was sitting on the previous primary.
- pinnedSessionId tracks user-initiated session selection
(setActiveSession sets it; setActiveSessionAuto leaves it alone).
The terminal-handoff branch in maybeAdoptSessionOnTransition skips
replacement when the terminating session matches the pin, so manually
clicking a session no longer yanks focus back to the workflow primary
each time the pinned session terminates.
Tests:
- TestSwitchSessionForStep_ReusesExistingProfileSession (never-launched).
- TestSwitchSessionForStep_ReusesPreviouslyLaunchedSession (launched).
- TestSwitchSessionForStep_ReusesFailedSession (FAILED reuse + cleanup).
- tasks.test.ts: focus-follow behavior across 4 scenarios.
- agent-session.test.ts: pinnedSessionId guard plus migration to
setActiveSessionAuto for WS-driven adoption.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat(orchestrator): deferred task move with hand-off prompt + boot/turn-end event split
Adds move_task_kandev MCP tool that lets a workflow agent (e.g. QA at "Review")
move a task to another step with a prompt for the receiving agent. The move is
queued as a PendingMove and applied on the calling agent's turn-end so on_enter
processing doesn't race the still-running turn.
Also splits agent.ready into agent.boot_ready + agent.ready at the lifecycle
layer. Previously both signals shared one event and the orchestrator
disambiguated them via a resumeInProgressSessions flag — which had a race
when the boot signal arrived before persistResumeState wrote state=STARTING,
causing the boot to fire on_turn_complete against the just-revived step and
ping-pong the task forward through the workflow.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix: address PR #743 review feedback (Greptile + CodeRabbit)
Backend:
- isTransientPromptError no longer treats ErrExecutionNotFound as transient,
preventing executeQueuedMessage from infinite-requeueing on permanent
missing-execution errors. autoStartStepPrompt's explicit errors.Is check
before the transient branch keeps the recovery path working (Greptile P2 #1)
- applyPendingMove drains the orphaned hand-off prompt on ApplyTransition
failure so it can't be misdelivered to the source step on a future turn
(Greptile P2 #2)
- handleMoveTask returns errors instead of panicking when messageQueue is
nil; queueMoveTaskPrompt returns an error so the deferred path fails fast
if the queue can't accept the prompt (CodeRabbit CR-2)
- handleMoveTask rejects when no primary session exists and a hand-off prompt
is required, instead of silently dropping it (CodeRabbit CR-3)
- autoStartStepPrompt preserves attachments from queued messages (was: silently
dropped); attachment-only messages are no longer skipped; the fallback path
also forwards attachments (CodeRabbit CR-5)
- applyPendingMove reinserts the pending move on early failure paths (config
missing, task/step load errors) so a future turn-end retries naturally
(CodeRabbit CR-6)
- registerKanbanTools split into 3 helpers (list/profile/task) to satisfy
backend function-size lint limits (CodeRabbit CR-1)
Web:
- maybeAdoptSessionOnTransition's auto-adopt path also checks pinnedSessionId
to handle the reverse-event-ordering race (old COMPLETED arrives before new
STARTING) — pinned sessions are no longer yanked off the user. Regression
test added (CodeRabbit CR-7)
Tests:
- mockAgentManager records (executionID, prompt) pairs; new helper
capturedPromptsForExecution actually filters by exec ID instead of
returning all captured prompts (CodeRabbit CR-4)
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(web): respect pinned session in primary-follow-focus path
When the user clicks a session, setActiveSession sets pinnedSessionId. If a
workflow profile switch then updates the task's primarySessionId while the
user happens to still be on the previous primary, the focus-follow block in
tasks.ts was calling setActiveSessionAuto(taskId, newPrimary) and silently
overriding the explicit pin. Add pinnedSessionId !== previousPrimary as a
fifth condition. Regression test in tasks.test.ts covers exactly this
sequence.
Addresses Greptile P1 on PR #743.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix: address CodeRabbit review on PR #743 (3 new comments)
- handleMoveTask idle path now rolls back the queued hand-off prompt when
taskSvc.MoveTask fails, so a "you were moved..." message can't be delivered
on a future turn for a transition that didn't actually happen. Added
TakeQueued to the MessageQueuer interface to support this.
- lookupSession now returns (*models.TaskSession, error) so callers can
distinguish a backend lookup failure from a legitimate "no primary session"
state. handleMoveTask maps the error case to ErrorCodeInternalError instead
of collapsing it into ErrorCodeValidation.
- queueMoveTaskPrompt returns errors instead of log-and-continue (signature
change already shipped); existing tests updated to reflect the new contract.
- Refactored TestPendingMove_ReviewToInProgress_OneTransitionOnly: the
~280-line monolithic test is now split into a pendingMoveScenario builder
+ assertion helpers, each well under the 80-line / 50-statement lint limit.
All 14 review threads resolved.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix: relax move_task_kandev prompt requirement; fix CI lint
CI surfaced two issues after rebasing onto main:
- nestif lint warning on autoStartStepPrompt's queued-message merge block.
Extracted the take-and-merge logic into takeAndMergeHandoffMessage helper,
flattening the nested conditionals.
- E2E test settings/config-management 'agent can move a task to a different
step' failed because my CR-3 fix made the move_task_kandev prompt parameter
required. That broke admin/config-mode moves where there's no agent to
hand off to. Made prompt optional: when supplied AND the source session
is mid-turn, the deferred-move flow runs (queue prompt + record
PendingMove); otherwise just move the task. Refactored handleMoveTask
into deferMoveTaskWithPrompt and applyMoveTaskImmediate to keep each
function under the 80-line lint limit.
Tool descriptions in mcp/server/server.go and mcp/server/config_handlers.go
updated to reflect prompt's now-optional status. moveTaskHandler in
config_handlers.go forwards prompt only when set.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix(mcp): treat 'no primary session' as a not-found, not an internal error
GetPrimarySessionByTaskID returns a plain error string ("no primary session
found for task: <id>") when the repo has no rows. My CR-B refactor was
treating ALL lookup errors as ErrorCodeInternalError, which broke the E2E
test 'agent can move a task to a different step' (config-mode move on a
freshly-created task that has no agent yet).
Match the not-found message and return (nil, nil); only real backend
failures bubble up as InternalError. Distinguishing properly with
errors.Is would require an exported sentinel that doesn't exist; matching
the noRowsErr substring is the pragmatic fix.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Kandev Agent <agent@kandev.dev>
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>